Home » HP Manuals » Printers » HP Scitex FB10000 » Manual Viewer

HP Scitex FB10000 Geffen TS Error 50071 - Page 2

Recommended actions

Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

Error ID: 50071 - Motion - X-Axis unable to move Recommended actions Verify that the waste bath is in its place at that it is up Verify that the Wiper is at its Home position Verify that the L&U axes are at their lower limits Perform Get Ready FB10000 Error Messages Troubleshooting Top 2

Section	Page
Error ID: 50071 - Motion – X-Axis unable to move	1
Possible Causes	1
Recommended actions	2
Verify that the waste bath is in its place at that it is up	2
Verify that the Wiper is at its Home position	2
Verify that the L&U axes are at their lower limits	2

Match case Limit results 1 per page

Error ID: 50071 - Motion – X-Axis unable to move

FB10000 Error Messages Troubleshooting

Recommended actions

Verify that the waste bath is in its place at that it is up

Verify that the Wiper is at its Home position

Verify that the L&U axes are at their lower limits

Perform Get Ready

Top