HP Scitex FB550 Rigid Media Guide - Page 22
Reflective media
![]() |
View all HP Scitex FB550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Reflective media When printing on reflective media, such as polished metal or mirror, additional preparation and maintenance procedures are necessary to minimize UV light being reflected back to the printhead nozzles where it could cure ink, plugging the nozzles. p. Select, from the control panel, Ink > Maintenance > Set Auto Purge & Wipe Interval > Auto Purge & Wipe Interval > Between Each Job. q. On flat, stable materials such as glass mirror, lower the printhead height to its minimum 0.065 inch (1.6 mm) value (Printing > Options > Head Height off Media). Remember to change this back to the nominal value of 0.085 inches (2.2 mm) when done printing on reflective media. r. Mask off any areas of the media surface that will not be imaged. • Perform a manual cleaning of the printheads at the end of each day when reflective materials have been used. ENWW 19
![](/manual_guide/products/hewlettpackard-scitex-fb550-rigid-media-guide-1bf373e/22.png)