HP Server rp2470 rp24xx A180 User Manual - Page 55
Configuring the Web Console, Using the ping Command
View all HP Server rp2470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 2 A-Class Server Installation A-Class Server Power Up and Boot Procedures Configuring the Web Console To configure the Web console for other A-Class servers, repeat all of the steps in this section. Use arp -a to display arp entries and use arp-d to delete the previous entry for IP 192.0.0.192. For example, to configure the Web Console for A-Class servers with MAC addresses of 0060b0a60ale and 001083a62a3e using a PC with an IP of 15.43.251.93, proceed as follows: At the C:\> prompt, type: route add 192.0.0.192 15.43.251.93 and press Enter. Using the ping Command At the C:\> prompt, type: ping 192.0.0.192 and press Enter. The terminal will display: Pinging 192.0.0.192 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. At the C:\> prompt, type: arp -s 192.0.0.192 00-60-b0-a6-0a-1e At the C:\> prompt, type: ping 192.0.0.192 and press Enter. The terminal will display: Pinging 192.0.0.192 with 32 bytes of data: Reply from 192.0.0.192: bytes=32 time=10ms TTL=255 Reply from 192.0.0.192: bytes=32 time=10ms TTL=255 Reply from 192.0.0.192: bytes=32 time=10ms TTL=255 Reply from 192.0.0.192: bytes=32 time=10ms TTL=255 Return to Configure the Web Browser and Configure The integrated A-Class Web Console Software. Using the arp -a Command At the C:\> prompt, type: arp -a and press Enter. The terminal will display: Internet Address Physical Address Type 15.43.248.1 192.0.0.192 00-00-0c-07-ac-0 dynami 0 c 00-60-b0-a6-0a- static 1e At the C:\> prompt, type: arp -d 192.0.0.192 and press Enter. At the C:\> prompt, type: arp -s 192.0.0.192 00-10-83-a6-0a-1e and press Enter. At the C:\> prompt, type: ping 192.0.0.192 and press Enter. The terminal will display: Pinging 192.0.0.192 with 32 bytes of data: Reply from 192.0.0.192: bytes=32 time=10ms TTL=255 55