HP Server rp2470 rp24xx A180 User Manual - Page 86
RAM Replacement, Step 1.
View all HP Server rp2470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
A-Class System Service A-Class Server RAM Removal and Replacement CAUTION Always handle RAM boards by their edges. Failure to comply with this precaution may result in damage to the RAM. Step 1. Open the ejector levers (down position) on each side of the RAM. Step 2. Grasp the RAM by the edges and lift straight up. Step 3. Set it carefully on the grounding mat. RAM Replacement CAUTION Keep RAM boards in their protective anti-static bags until you are ready to install them. Always handle RAM boards by their edges after you have removed them from their protective anti-static bags. Be sure that an anti-static wrist strap is still attached to your wrist and grounded to the cabinet main chassis when you handle and install RAM boards. Failure to follow these precautions may cause damage to the RAM. Individual RAM board replacement procedures are described below. The illustrated panels that follow depict the replacement process: Step 1. Open the ejector levers (down position). Step 2. Orient the RAM board with the white stripe on the card toward the white ejector lever. Insert the RAM board into the connector until the fingers on the card edge just touch the connector. 86 Chapter 3