HP SignagePlayer mp8000r Maintenance & Service Guide: HP SignagePlayer mp8 - Page 27
Table 3-4, Slot Security, Network Service, System IDs, DriveLock Security
View all HP SignagePlayer mp8000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Table 3-4 Computer Setup-Security (continued) ◦ USB Port 11 ◦ USB Port 12 ● Accessory USB Ports ◦ USB Port 1 ◦ USB Port 2 Slot Security Allows you to disable any PCI or PCI Express slot Network Service Boot Enables/disables the computer's ability to boot from an operating system installed on a network server. (Feature available on NIC models only; the network controller must be either a PCI expansion card or embedded on the system board.) System IDs Allows you to set: ● Asset tag (18-byte identifier), a property identification number assigned by the company to the computer. ● Ownership tag (80-byte identifier) displayed during POST. ● Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can only be updated if the current chassis serial number is invalid. (These ID numbers are normally set in the factory and are used to uniquely identify the system.) ● Keyboard locale setting (for example, English or German) for System ID entry. DriveLock Security Allows you to assign or modify a master or user password for hard drives. When this feature is enabled, the user is prompted to provide one of the DriveLock passwords during POST. If neither is successfully entered, the hard drive will remain inaccessible until one of the passwords is successfully provided during a subsequent cold-boot sequence. NOTE: This selection will only appear when at least one drive that supports the DriveLock feature is attached to the system. See the Desktop Management Guide for more information. Computer Setup (F10) Utilities 17