HP Spectre 13t-h200 HP Split 13 x2 PC Maintenance and Service Guide
HP Spectre 13t-h200 Manual
View all HP Spectre 13t-h200 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Spectre 13t-h200 manual content summary:
- HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 1
HP Split 13 x2 PC Maintenance and Service Guide IMPORTANT! This document is intended for HP authorized service providers only. - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 2
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Second Edition: October 2013 First Edition: August 2013 Document Part Number: 728979-002 Product notice This guide describes - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 3
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 4
iv Safety warning notice - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 5
base ...9 Top ...9 Keys ...10 Lights ...11 TouchPad ...12 Left side ...13 Right side ...14 3 Illustrated parts catalog 15 Locating the serial number, product replacement preliminary requirements 29 Tools required ...29 Service considerations ...29 Plastic parts ...29 Cables and connectors 30 v - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 6
battery 65 TouchPad 67 Audio/USB board 68 Power connector board 69 Hard drive 71 Hinge assembly 73 5 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI 75 Starting Setup Utility (BIOS) ...75 Updating the BIOS ...75 Determining the BIOS version 75 Downloading a BIOS update 76 vi - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 7
Using HP PC Hardware Diagnostics (UEFI 77 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device 77 6 Specifications ...78 7 Backing up, restoring, and recovering 80 Creating recovery media and backups 81 Creating HP Recovery media 82 Restore and recovery ...83 Using Windows Refresh for - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 8
viii - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 9
HP Split 13 x2 PC Intel® Core® i5-4202Y 1.60-GHz processor (3.00-MB L3 cache, dual core, 4.5 W) Intel Core i3-4012Y 1.50-GHz processor (3.00-MB L3 cache, dual core, 4.5 W) Integrated system on chip (SoC) platform controller hub (PCH) Internal graphics: Intel high-definition graphics Support - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 10
wide area network (WWAN) options by way of wireless module Two WLAN antennas built into tablet Support for the following WWAN formats: ● HP hs3110 HSPA+ Mobile Broadband Module ● HP lt4112 LTE/HPSA+ Mobile Broadband Module Accelerometer Ambient light sensor (ALS) Digital compass Gyroscope Near field - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 11
with image sensor Clickpad requirements: ● MultiTouch gestures enabled ● Taps enabled as default Support for the following AC adapters: ● 65-W HP Smart AC adapter (non-PFC, 4.5-mm) ● 65-W HP Smart AC adapter (non-PFC, EM, 4.5-mm) Support for a 3-cell, 32-Wh, 2.96-Ah, Li-ion battery for use only - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 12
2 External component identification Finding your hardware and software information Locating hardware To find out what hardware is installed on your computer: 1. From the Start screen, type c, and then select Control Panel. 2. Select System and Security, and then in the System area, click Device - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 13
Tablet Display components Item (1) (2) (3) (4) Component WLAN antennas (2)* Internal microphones (2) Webcamera light HP TrueVision HD Webcamera (5) Ambient light sensor (6) Speakers (2) Description Send and receive wireless signals to communicate with WLANs. Record sound. On: The webcamera is - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 14
obstructions. For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this guide, from the Start screen, type support, select the HP Support Assistant app, select My computer, and then select User - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 15
Edge components Item (1) Component Power button Description ● When the computer is off, press the button to turn on the tablet. ● When the computer is on, press the button briefly to initiate Sleep. CAUTION: Pressing and holding down the power button will result in the loss of unsaved information - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 16
safety information, refer to the Regulatory, Safety, and Environmental Notices. To access this guide, from the Start screen, type support, select the HP Support Assistant app, select My computer, and then select User guides. NOTE: When a device is connected to the jack, the computer speakers are - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 17
Keyboard base Top Item (1) (2) (3) Component Alignment posts Release latch Docking connector Description Align and attach the tablet to the keyboard base. Releases the tablet. To release the tablet, slide the release latch to the left. Connects the tablet to the keyboard base. Keyboard base 9 - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 18
Keys Item (1) (2) Component esc key fn key (3) Windows key (4) Action keys Description Displays system information when pressed in combination with the fn key (select models only). Executes frequently used system functions when pressed in combination with the b key or the esc key (select - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 19
Lights Item (1) (2) (3) Component Caps lock light Mute light Wireless light Description ● White: Caps lock is on. ● Off: Caps lock is off. ● Amber: Computer sound is off. ● Off: Computer sound is on. On: An integrated wireless device, such as a WLAN device and/or a Bluetooth device, is on. NOTE: - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 20
TouchPad Item (1) (2) (3) Component TouchPad zone Left TouchPad button Right TouchPad button Description Reads your finger gesture to move the pointer or activate items on the screen. Functions like the left button on an external mouse. Functions like the right button on an external mouse. 12 - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 21
Safety, and Environmental Notices. To access this guide, from the Start screen, type support, select the HP Support Assistant app, select My computer, and then select User guides. NOTE: When a device is connected to the press in on the card and quickly release it until it pops out. Keyboard base 13 - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 22
Right side Item (1) (2) Component USB 3.0 port HDMI port (3) Power connector (4) AC adapter light Description Connects optional USB devices, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Connects an optional video or audio device, such as a high-definition television - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 23
3 Illustrated parts catalog Locating the serial number, product number, and model number You may need the information shown in the following illustration when you travel internationally or when you contact support. Locating the serial number, product number, and model number 15 - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 24
, spare part number 736883-001. See Cable Kit on page 21 for more Cable Kit spare part information. 13.3-inch, AG, FHD, WLED TouchScreen, display assembly 737696-001 13.3-inch, AG, HD, WLED TouchScreen, display assembly 737697-001 RTC battery (includes cable and double-sided adhesive) 740187 - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 25
Adapter 717384-006 Micro-solid-state drive (mSSD): 128-GB mSSD 737218-001 64-GB mSSD 737217-001 WWAN module: HP hs3110 HSPA+ Mobile Broadband Module 723895-006 HP lt4112 LTE/HPSA+ Mobile Broadband Module 740011-006 Power button board 736889-001 NOTE: The power button board does not - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 26
Item (13) (14) (15) (16) (17) (18) (19) Component Spare part number Equipped with an Intel Core i5-4202Y 1.60-GHz processor (3.00-MB L3 cache, dual - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 27
Keyboard base major components Item (1) Component Keyboard/top cover (includes keyboard cable): For use in Belgium For use in Brazil For use in Canada For use in Denmark, Finland, and Norway For use in France For use in Germany For use in Greece For use in Italy For use in Japan For use in Latin - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 28
Item (2) (3) (4) (5) (6) (7) (8) Component Spare part number For use in South Korea 737219-AD1 For use in Spain 737219-071 For use in Switzerland 737219-BG1 For use in Taiwan 737219-AB1 For use in Thailand 737219-281 For use in Turkey 737219-141 For use in the United Kingdom and - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 29
Cable Kit Item (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) Component Cable Kit, includes: Proximity board cable Webcamera/microphone module cable Power button board cable Volume button board cable TouchScreen board cable NFC module cable - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 30
Mass storage devices Item (1) (2a) (2b) (3) Component 500-GB, 5400-rpm, SATA, 5.0-mm hard drive (does not include hard drive bracket, hard drive connector cable, or screws) Hard Drive Hardware Kit, includes: Hard drive bracket Hard drive connector cable Screws (not illustrated) Micro-solid-state - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 31
Miscellaneous parts Component AC adapter 65-W HP Smart AC adapter (non-PFC, 4.5-mm) 65-W HP Smart AC adapter (non-PFC, EM, 4.5-mm) Power cord (3-pin, black, 1.83-m): For use in Argentina For use in Brazil For use in Denmark For - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 32
use in South Korea (3-pin, black, 1.83-m) Power cord for use in Argentina (3-pin, black, 1.83-m) Power cord for use in India (3-pin, black, 1.83-m) HP HDMI-to-VGA adapter HP RJ45-to-USB adapter Intel Dual Band Wireless-AC 7260 802.11 ac 2×2 WiFi + BT 4.0 Combo Adapter 65 - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 33
Spare part number 736883-001 736884-001 736885-001 736886-001 736887-001 736888-001 736889-001 736890-001 736891-001 736892-001 736893-001 736894-001 Description Cable Kit NOTE: See Cable Kit on page 21 for more Cable Kit spare part information. Hard Drive Hardware Kit (includes hard drive bracket, - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 34
Spare part number 736895-001 736896-001 736897-001 736898-001 736899-001 736900-001 736901-001 737216-001 737217-001 737218-001 737219-001 737219-031 737219-041 737219-051 737219-061 737219-071 737219-131 737219-141 737219-151 737219-161 737219-171 737219-201 737219-251 737219-281 737219-291 737219- - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 35
See Cable Kit on page 21 for more Cable Kit spare part information. 13.3-inch, AG, HD, WLED TouchScreen, display assembly NOTE: The display assembly does operating system (includes replacement thermal material) HP lt4112 LTE/HPSA+ Mobile Broadband Module Sequential part number listing 27 - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 36
Spare part number 740187-001 746493-001 Description RTC battery (includes cable and double-sided adhesive) Power connector board for use on keyboard base models not equipped with a hard drive (includes power connector, HDMI port, and USB port) NOTE: The power connector board does not include the - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 37
procedures: ● Flat-bladed screw driver ● Magnetic screw driver ● Phillips P0 screw driver Service considerations The following sections include some of the considerations that you must keep in mind parts. Apply pressure only at the points designated in the maintenance instructions. Tools required 29 - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 38
Cables and connectors CAUTION: When servicing the tablet, be sure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the tablet. Cables must - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 39
Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 40
material. ● Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and equipment. ● Use conductive field service tools, such as cutters, screw drivers, and vacuums. ● When fixtures must directly contact dissipative surfaces, use fixtures made only of - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 41
with ground cords of one megohm resistance ● Static-dissipative tables or floor mats with hard ties to the ground ● Field service kits ● Static awareness labels ● Material-handling packages ● Nonconductive plastic bags, tubes, or boxes ● Metal tote boxes ● Electrostatic voltage levels and - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 42
this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the tablet and page 21 for more Cable Kit spare part information. 13.3-inch, AG, FHD, WLED TouchScreen, display assembly 737696-001 13.3-inch, AG, HD, WLED TouchScreen, display assembly 737697 - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 43
2. Remove the display assembly screw cover trim piece. The display assembly screw cover trim piece is included with all tablet spare part components. 3. Remove the four Phillips PM2.0×4.0 screws that secure the back cover to the display assembly. CAUTION: Before positioning the tablet with the - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 44
34). WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a replacement battery provided by HP, or a compatible battery purchased from HP. CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To prevent loss - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 45
4. Remove the tablet battery (5). Reverse this procedure to install the tablet battery. Proximity sensor module Description Proximity sensor module NOTE: The proximity sensor module does not include the proximity sensor module cable. The proximity sensor module cable is included in the Cable Kit, - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 46
Remove the proximity sensor module: 1. Disconnect the proximity sensor module cable (1) from the system board. 2. Remove the Phillips PM2.0×3.0 screw (2) that secures the proximity sensor module to the display assembly. 3. Remove the proximity sensor module (3) and cable. Reverse this procedure to - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 47
4. Remove the back cover (see Back cover on page 34). 5. Remove the tablet battery (see Tablet battery on page 36). Remove the webcamera/microphone module: 1. Detach the grounding tape (1) that secures the webcamera/microphone module to the display assembly. 2. Disconnect the webcamera/microphone - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 48
micro Solid-state drive (mSSD) Description 128-GB mSSD 64-GB mSSD Spare part number 737218-001 737217-001 Before removing the solid-state drive, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 49
Reverse this procedure to install the solid-state drive. WLAN module Description Broadcom BCM4352 802.11ac 2×2 Wi-Fi + BT 4.0 Combo Adapter Intel Dual Band Wireless-AC 7260 802.11 ac 2×2 WiFi + BT 4.0 Combo Adapter Intel Wireless-N 7260BN 802.11 b/g/n 2×2 WiFi + BT 4.0 Combo Adapter Spare part - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 50
3. Remove the WLAN module (3) by pulling the drive away from the slot at an angle. NOTE: If the WLAN antenna cables are not connected to the terminals on the WLAN module, protective sleeves should be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 51
hs3110 HSPA+ Mobile Broadband Module HP lt4112 LTE/HPSA+ Mobile Broadband Module Spare part number 723895-006 740011-006 Before removing the WWAN module, follow these steps: 1. Turn off the tablet. - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 52
3. Remove the WWAN module (3) by pulling the drive away from the slot at an angle. NOTE: If the WWAN antenna cables are not connected to the terminals on the WWAN module, protective sleeves should be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 53
Power button board Description Power button board NOTE: The power button board does not include the power button board cable. The power button board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 21 for more Cable Kit spare part information. Spare part - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 54
RTC battery Description RTC battery (includes cable and double-sided adhesive) Spare part number 740187-601 Before removing the system board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 55
Volume button board Description Volume button board (includes cable) NOTE: The volume button board does not include the volume button board cable. The volume button board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 21 for more Cable Kit spare part - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 56
3. Remove the volume button board (3). Reverse this procedure to install the volume button board. TouchScreen board Description Spare part number TouchScreen board (includes double-sided adhesive) 736892-001 NOTE: The TouchScreen board does not include the TouchScreen board cable. The - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 57
Remove the TouchScreen board: 1. Release the two TouchScreen board ZIF connectors (1) and (2) to which the display panel TouchScreen cables are attached, and then disconnect the display panel TouchScreen cables from the TouchScreen board. 2. Release the system board ZIF connector (3) to which the - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 58
Remove the NFC module: 1. Release the audio/power connector board ZIF connector (1) to which the NFC module cable is attached, and then disconnect the NFC module cable from the audio/power connector board. 2. Release the NFC module ZIF connector (2) to which the NFC antenna cable is attached, and - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 59
Audio/power connector board Description Aiudio/power connector board NOTE: The audio/power connector board does not include the audio/power connector board cable. The audio/power connector board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 21 for more - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 60
5. Remove the audio/power connector board (5). 6. Remove the audio/power connector board and cable. Reverse this procedure to install the audio/power connector board. Vibrator module Description Vibrator module (includes cable) Spare part number 736901-001 Before removing the vibrator module, - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 61
2. Release the vibrator module (2) from the clip molded into the display assembly. 3. Remove the vibrator module and cable. Reverse this procedure to install the vibrator module. Docking connecter board Description Spare part number Docking connecting board 736888-001 NOTE: The docking - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 62
Remove the docking connector board: 1. Disconnect the vibrator module cable (1) from the docking connector board. 2. Release the system board ZIF connector (2) to which the longer docking connector board cable is attached, and then disconnect the longer docking connector board cable from the system - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 63
Display panel cable NOTE: The display panel cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 21 for more Cable Kit spare part information. Before removing the display panel cable, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 64
Card reader board Description Card reader board NOTE: The card reader board does not include the card reader board cable. The card reader board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 21 for more Cable Kit spare part information. Spare part number - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 65
3. Remove the card reader board (3) by sliding it forward, making sure to carefully route the card reader board cable through the opening (4) in the display assembly. Reverse this procedure to install the card reader board. Speakers Description Speaker Kit (includes left and right speakers and - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 66
c. Docking connector board (see Docking connecter board on page 53) d. Card reader board (see Card reader board on page 56) Remove the speakers: 1. Release the speaker cables (1) from the retention clips and routing channels built into the display assembly. 2. Remove the two Phillips PM2.0×3.0 - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 67
d. WWAN module (see WWAN module on page 43) e. Volume button board (see Volume button board on page 47) Remove the wireless antenna cables and transceivers: 1. Disconnect the WLAN antenna cables (1) from the WLAN module. 2. Release the wireless antenna cables from the retention clips (2) and routing - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 68
System board Description Equipped with an Intel Core i5-4202Y 1.60-GHz processor (3.00-MB L3 cache, dual core, 4.5 W) and the Windows 8.1 Professional operating system Equipped with an Intel Core i5-4202Y 1.60-GHz processor (3.00-MB L3 cache, dual core, 4.5 W) and the Windows 8.1 Standard operating - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 69
Remove the system board: 1. Disconnect the following cables from the system board: (1) TouchScreen board cable (2) Proximity sensor module cable (3) Power button board cable (4) Docking connector board cable (5) Audio/power connector board cable (6) Webcamera/microphone module cable (7) Docking - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 70
3. Remove the system board (2). Reverse this procedure to install the system board. 62 Chapter 4 Removal and replacement preliminary requirements - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 71
Keyboard base component replacement procedures CAUTION: Keyboard base components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the keyboard base and void the warranty. This chapter provides removal and replacement procedures for - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 72
3. Remove the two Phillips PM2.0×4.0 screws (3) that secure the bottom cover to the keyboard/ top cover. 4. Lift the rear edge of the bottom cover until the left and right sides detach from the keyboard/ top cover. 5. Remove the bottom cover. Reverse this procedure to install the bottom cover. 64 - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 73
WARNING! To reduce potential safety issues, use only the battery provided with the keyboard base, a replacement battery provided by HP, or a compatible battery purchased from HP. CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To prevent loss - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 74
4. Remove the keyboard base battery (4). Reverse this procedure to install the keyboard base battery. 66 Chapter 4 Removal and replacement preliminary requirements - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 75
TouchPad Description TouchPad (includes cable) Spare part number 736880-001 Before removing the TouchPad, follow these steps: 1. Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are off or in Hibernation, turn the tablet on, and then shut it down - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 76
Audio/USB board Description Audio/USB board (includes audio jack, memory card reader, and USB port) NOTE: The audio/USB board does not include the audio/USB board cable. The audio/USB board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 21 for more Cable Kit - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 77
6. Disconnect the hinge assembly cable (1) from the audio/USB board. 7. Remove the audio/USB board (2) and cable. Reverse this procedure to install the audio/USB board. Power connector board NOTE: The power connector board does not include the power connector board cable. The power connector board - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 78
Remove the power connector board: 1. Release the power connector board ZIF connector (1) to which the audio/USB board cable is attached, and then disconnect the audio/USB board cable from the power connector board. 2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the power connector - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 79
Hard drive Description Spare part number 500-GB, 5400-rpm, SATA, 5.0-mm hard drive (does not include hard drive bracket, hard drive connector cable, or screws) 737957-005 NOTE: The hard drive bracket, hard drive connector cable, and screws are included in the Hard Drive Hardware Kit, spare part - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 80
3. Remove the hard drive (3). 4. If it is necessary to disassemble the hard drive, perform the following steps: a. Disconnect the hard drive connector cable (1) from the hard drive. b. Remove the four Phillips PM2.75×4.0 screws (2) that secure the hard drive bracket to the hard drive. 72 Chapter 4 - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 81
c. Remove the hard drive bracket (3) from the hard drive. The hard drive bracket, hard drive connector cable, and screws are available in the Hard Drive Hardware Kit, spare part number 736884-001. Reverse this procedure to install the hard drive. Hinge assembly NOTE: The hinge assembly spare part - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 82
Remove the hinge assembly: 1. Remove the four Phillips PM2.0×3.0 screws (1) that secure the hinge assembly to the keyboard/ top cover. 2. Remove the hinge assembly (2) and cables. Reverse this procedure to install the hinge assembly. 74 Chapter 4 Removal and replacement preliminary requirements - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 83
Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) Setup Utility HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 84
type support, and then select the HP Support Assistant app. 2. Click Updates and tune-ups, and then click Check for HP updates now. 3. Follow the on-screen instructions. 4. by following the on-screen instructions. 76 Chapter 5 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 85
need to stop a diagnostic test, press esc. Downloading HP PC Hardware Diagnostics (UEFI) to a USB device NOTE: The HP PC Hardware Diagnostics (UEFI) download instructions are provided in English only. 1. Go to http://www.hp.com. 2. Click Support & Drivers, and then click the Drivers & Software tab - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 86
19.5 V dc @ 2.31 A - 45 W 19.5 V dc @ 3.33 A - 65 W 5°C to 35°C -20°C to 60°C 10% to 90% 5% to 95% 78 Chapter 6 Specifications U.S. 13.39 in 8.50 in 0.44 in 2.36 lb 13.39 in 8.54 in 0.35 in 2.21 lb 13.39 in 9.06 in 0.78 in 4.56 lb 41°F to 95°F -4°F to 140°F - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 87
Metric U.S. Operating -15 m to 3,048 m -50 ft to 10,000 ft Nonoperating -15 m to 12,192 m -50 ft to 40,000 ft NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The device operates well within this range of temperatures. 79 - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 88
restoring, and recovering Your computer includes tools provided by HP and the operating system to help you safeguard your Creating recovery media and backups ● Restoring and recovering your system NOTE: This guide describes an overview of backing up, restoring and recovering options. For more details - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 89
, or system diagnostics). You can also manually create a system restore point at any , see Help and Support. From the Start screen, type h, and then select Help and Support. 3. As you computer by reinstalling Windows or choose to recover using HP Recovery Manager. NOTE: File History is not enabled - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 90
the HP website. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/ HP Recovery media: 1. From the Start screen, type recovery, and then select HP Recovery Manager. 2. Select Recovery Media Creation, and then follow the on-screen instructions - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 91
Support. ● If you need to correct a problem with a preinstalled application or driver, use the Drivers and Applications Reinstall option of HP HP Recovery Manager, select Drivers and Applications Reinstall, and then follow the on-screen instructions Even if you did not manually create a restore point, - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 92
the HP Recovery Help and Support for instructions on reinstalling traditional applications. From the Start screen, type h, and then select Help and Support. NOTE: . 3. Click Change PC settings in the bottom-right corner of the screen, and then select General from the PC settings screen. 4. Scroll - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 93
3. Select Troubleshoot from the boot options menu. 4. Select Reset your PC, and then follow the on-screen instructions. To use the Start screen: 1. From the Start screen, point to the upper-right or lower-right corner of the screen to reveal the charms. 2. Click Settings. 3. Click Change PC settings - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 94
as you press the power button. 2. Choose your keyboard layout. 3. Select Troubleshoot from the boot options menu. 4. Select HP Recovery Manager, and follow the on-screen instructions. Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 95
drive you want to boot from. 4. Follow the on-screen instructions. Removing the HP Recovery partition HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space. IMPORTANT: Removing the HP Recovery partition means you can no longer use Windows Refresh - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 96
8 Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC, or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 97
Country/region Accredited agency Applicable note number France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 The Netherlands KEMA 1 Norway NEMKO 1 The People's Republic of China COC 5 South Korea EK 4 Sweden CEMKO 1 Switzerland SEV 1 Taiwan BSMI 4 The United - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 98
dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 99
56 spare part number 18, 25, 56 chipset, product description 1 components display 5 edge 7 keys 9, 10 left side 13 lights 11 right side 14 TouchPad 12 connectors, service considerations 30 D display assembly, spare part numbers 16, 27 display components 5 display panel cable illustrated 21 removal - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 100
O operating system, product description 3 optical drive, product description 1 P packaging guidelines 32 plastic parts, service considerations 29 Plastics Kit, spare part number 26 ports docking 8 HDMI 14 USB 13, 14 ports, product description 3 power button 7 power button board removal 45 spare part - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 101
removal 41 spare part numbers 17, 24, 41 workstation guidelines 32 WWAN module removal 43 spare part numbers 17, 24, 27, 43 U USB port 13, 14 V vibrator module removal 52 spare part number 18, 26, 52 video, product description 2 volume button 8 volume button board removal 47 spare part number - HP Spectre 13t-h200 | HP Split 13 x2 PC Maintenance and Service Guide - Page 102
HP Split 13 x2 PC
Maintenance and Service Guide
IMPORTANT! This document is intended for HP
authorized service providers only.