HP Spectre 13t-h200 HP Split 13 x2 PC Maintenance and Service Guide - Page 79
Hard drive, Remove the hard drive
View all HP Spectre 13t-h200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Hard drive Description Spare part number 500-GB, 5400-rpm, SATA, 5.0-mm hard drive (does not include hard drive bracket, hard drive connector cable, or screws) 737957-005 NOTE: The hard drive bracket, hard drive connector cable, and screws are included in the Hard Drive Hardware Kit, spare part number 736884-001. Before removing the hard drive, follow these steps: 1. Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet and keyboard base by unplugging the power cord from the tablet and keyboard base. 3. Disconnect the tablet from the keyboard base. 4. Remove the bottom cover (see Bottom cover on page 63). 5. Remove the keyboard base battery (see Keyboard base battery on page 65). 6. Remove the power connector board (see Power connector board on page 69). Remove the hard drive: 1. Release the grounding tape (1) that secures the hard drive to the keyboard/top cover. 2. Remove the four Phillips PM2.0×3.0 screws (2) that secure the hard drive to the keyboard/ top cover. Removal and replacement procedures 71