HP Spectre 13t-h200 HP Split 13 x2 PC Maintenance and Service Guide - Page 54

RTC battery, Detach the RTC battery

Get HP Spectre 13t-h200 PDF manuals and user guides View all HP Spectre 13t-h200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

RTC battery Description RTC battery (includes cable and double-sided adhesive) Spare part number 740187-601 Before removing the system board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 34). 5. Remove the tablet battery (see Tablet battery on page 36). Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. 2. Detach the RTC battery (2) from the display assembly. (The RTC battery is attached to the display assembly with double-sided adhesive.) 3. Remove the system board. Reverse this procedure to install the system board. 46 Chapter 4 Removal and replacement preliminary requirements

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
RTC battery
Description
Spare part number
RTC battery (includes cable and double-sided adhesive)
740187-601
Before removing the system board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover
on page
34
).
5.
Remove the tablet battery (see
Tablet battery
on page
36
).
Remove the RTC battery:
1.
Disconnect the RTC battery cable
(1)
from the system board.
2.
Detach the RTC battery
(2)
from the display assembly. (The RTC battery is attached to the
display assembly with double-sided adhesive.)
3.
Remove the system board.
Reverse this procedure to install the system board.
46
Chapter 4
Removal and replacement preliminary requirements