HP Spectre x2 Maintenance and Service Guide - Page 34

Solid-state drive, Remove the Phillips PM2.0×2.5 screw

Get HP Spectre x2 PDF manuals and user guides View all HP Spectre x2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

2. Remove the battery (2). Reverse this procedure to install the battery. Solid-state drive Description 512-MB, M2.2280, SATA-3, solid-state drive supporting TLC 256-MB, M2.2280, SATA-3, solid-state drive supporting TLC 256-MB, M2.2280, PCIe-2×4, solid-state drive 128-MB, M2.2280, SATA-3, solid-state drive supporting TLC 128-MB, M2.2280, SATA-3, MH solid-state drive Spare part number 763008-006 760615-014 814693-001 759848-011 827560-008 Before removing the solid-state drive, follow these steps: 1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system. 2. Disconnect the power from the slate by unplugging the power cord from the slate. 3. Disconnect all external devices from the slate. 4. Remove the display panel assembly (see Display panel assembly on page 20). Remove the solid-state drive: 1. Remove the Phillips PM2.0×2.5 screw (1) that secures the solid-state drive to the slate. (The solid-state drive tilts up.) 24 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
2.
Remove the battery
(2)
.
Reverse this procedure to install the battery.
Solid-state drive
Description
Spare part number
512-MB, M2.2280, SATA-3, solid-state drive supporting TLC
763008-006
256-MB, M2.2280, SATA-3, solid-state drive supporting TLC
760615-014
256-MB, M2.2280, PCIe-2×4, solid-state drive
814693-001
128-MB, M2.2280, SATA-3, solid-state drive supporting TLC
759848-011
128-MB, M2.2280, SATA-3, MH solid-state drive
827560-008
Before removing the solid-state drive, follow these steps:
1.
Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then
shut it down through the operating system.
2.
Disconnect the power from the slate by unplugging the power cord from the slate.
3.
Disconnect all external devices from the slate.
4.
Remove the display panel assembly (see
Display panel assembly
on page
20
).
Remove the solid-state drive:
1.
Remove the Phillips PM2.0×2.5 screw
(1)
that secures the solid-state drive to the slate. (The solid-state
drive tilts up.)
24
Chapter 5
Removal and replacement procedures