HP StorageWorks 1000 HP StorageWorks 1000 Modular Smart Array installation gui - Page 75
Table 13, Hard drive information, Array LUN information
View all HP StorageWorks 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
IMPORTANT: In multipath configurations: • Verify that both HBAs in each server have been granted access to the storage. • In active/active configurations, manually assign a preferred path (controller ownership) for each LUN. By default, MSA firmware initially assigns ownership of all LUNs to the controller in slot one (front-right) of the MSA. Then, based on access patterns and I/O load, the firmware automatically re-assigns ownership of the LUN between the controllers to balance the load. If your environment controls load balancing from the host, you must manually assign the preferred path for each LUN. Perform these tasks using your chosen configuration utility. Refer to the appropriate user documentation for instructions. Go to Table 13: "Hard drive information" on page 112 and Table 14: "Array (LUN) information" on page 116 to record information about your storage. HP StorageWorks 1000 Modular Smart Array installation guide 75