HP StorageWorks 1500cs HP StorageWorks Mezzanine Backup-Restore Solution - Page 6
Assumptions
![]() |
View all HP StorageWorks 1500cs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Assumptions MSA1500 • Uses SSP. • Stores data with RAID. When using RAID Advanced Data Guarding (ADG), data is protected if two disk drives should fail. Tape library An HP StorageWorks Enterprise Backup Solution (EBS)-supported HP StorageWorks MSL or HP StorageWorks ESL model tape library is used. Backup process All backups are LAN-free over the Fibre Channel fabric. Recovery process Depending on which ISV is used and how the application is configured, the primary backup may or may not be on disk. If staging is implemented, then after the policy parameters are satisfied, the backup can be migrated from disk to tape. When the disk copy expires, the copy on tape becomes the primary backup file. Fibre Channel infrastructure The SAN is operating correctly and is a known good environment before mezzanine storage is implemented. Design rules • When using multiple hosts on the MSA1500, use SSP to protect LUNs. LUNs may not be shared, as shared LUNs may result in data corruption. • The MSA1500 can be configured with 32 LUNs. Best practices dictate no more than 20 servers accessing a single MSA1500. • The NSR on the fabric should be zoned using host-centric based zoning. 6
![](/manual_guide/products/hewlettpackard-storageworks-1500cs-hp-storageworks-mezzanine-backuprestore-solution-2819c23/6.png)