HP StorageWorks 1500cs HP StorageWorks Mezzanine Backup-Restore Solution - Page 9

Interconnect Table 2. SAN Fibre Channel infrastructure Features HP StorageWorks SAN Switch 2/8 HP StorageWorks SAN Switch 2/16 Number of ports 8 16 Per port line speed 1.0625/2.125 Gb/s, Full Duplex 1.0625/2.125 Gb/s, Full Duplex Note 1: An external FC switch must be used. The MSA Fabric Switch 6 is not supported. Note 2: Shaded areas represent hardware used in example technical blueprint configuration. Storage Table. 3. Disk storage Features MSA1500 w/160-GB drives plus two MSA20 Serial ATA disk enclosures MSA1500 w/250-GB drives plus two MSA20 Serial ATA disk enclosures Number of SATA disk drives 12 12 Maximum number of SATA disk drives 96 96 Total raw capacity 15.0 TB 23.4 TB Note 1: Shaded areas represent hardware used in example technical blueprint configuration. Note 2: One MSA1500 can support a total of eight single-bus MSA20 Serial ATA disk enclosures or four MSA30 singlechannel SCSI disk enclosures Table 4. Tape storage Features HP StorageWorks MSL5026s2 tape library HP StorageWorks MSL5030 tape library Drive type SDLT LTO Ultrium Number of drives 1 2 1 2 Number of slots 26 30 Maximum native storage capacity 4.2 TB 3.6 TB Maximum native data transfer rate 16 MB/s 57.6 GB/hr 32 MB/s 115.2 GB/hr 15 MB/s 54 GB/hr 30 MB/s 108 GB/hr Note 1: An EBS-supported MSL or ESL model tape library is used. Note 2: Shaded areas represent hardware used in the example technical blueprint configuration. 9