HP StorageWorks 16-EL Fabric OS V3.1.1C Release Notes - Page 9

Firmware compatibility Firmware compatibility Firmware v3.1.1c works with selected HP StorageWorks 2 Gbps switch models only. The firmware will not work if loaded onto HP StorageWorks 1 Gbps switch models. HP recommends that all switches supported by the v3.1.1c firmware be updated to version 3.1.1c together, so all supported switches operate with the same firmware version. Refer to the HP StorageWorks SAN Design Reference Guide for information on supported versions of firmware. This document is available at: http://h18000.www1.hp.com/products/storageworks/san/documentation.html Obtaining firmware and upgrade instructions Version 3.1.1c firmware is available on the HP web site at: http://welcome.hp.com/country/us/eng/prodserv/storage.html Note: Please use the steps provided in "Accessing software" on page 6 for the procedures for locating the firmware from the Web page listed above. Detailed firmware upgrade instructions are available as follows: ■ Reference the HP StorageWorks Fabric OS Procedures Version 3.1.x/4.1.x User Guide, part number AA-RS23C-TE, or ■ Reference the Firmwareupgrade.txt available on the Software CD that shipped with your switch. Fabric OS 3.1.1c Release Notes 9