HP StorageWorks 2/128 Brocade Web Tools Administrator's Guide (53-0000194-01, - Page 67
Performing a Fast Boot, Changing System Configuration Parameters
View all HP StorageWorks 2/128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
3 Performing a Fast Boot A fast boot reduces boot time significantly by bypassing power-on self test (POST). To perform a switch fast boot 1. Launch the Switch Admin module as described on page 3-3. 2. Click the Firmware Download tab (see Figure 4-2 on page 4-5). 3. Click the Fastboot radio button. 4. Click Apply. Performing a Reboot Use the following procedure to reboot the CP and execute the normal power-on booting sequence. To perform a switch reboot 1. Launch the Switch Admin module as described on page 3-3. 2. Click the Firmware Download tab (see Figure 4-2 on page 4-5). 3. Click the Reboot radio button. 4. Click Apply. Changing System Configuration Parameters When you change system configuration parameters for a SilkWorm 24000 configured with two logical switches, it is on a logical-switch basis. This means that for each logical switch, you must change the system configuration parameters individually. You must disable the switch before you can configure fabric parameters. You can change the following system configuration parameters: • Switch fabric settings • Virtual channel settings • Arbitrated loop parameters • System services Web Tools Administrator's Guide 3-9 Publication Number: 53-0000194-01