HP StorageWorks 2/128 HP StorageWorks Fabric OS 5.X Procedures User Guide (AA- - Page 110
Displaying information, Link incidents, Registered listeners, Node identification data
View all HP StorageWorks 2/128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
7. Respond to the remaining prompts (or press Ctrl-d to accept the other settings and exit). 8. Issue the switchEnable command to reenable the switch. For example: switch:admin> configure Configure... Fabric parameters (yes, y, no, n): [no] yes Domain: (1..239) [3] 5 R_A_TOV: (4000..120000) [10000] E_D_TOV: (1000..5000) [2000] Data field size: (256..2112) [2112] Sequence Level Switching: (0..1) [0] Disable Device Probing: (0..1) [0] Suppress Class F Traffic: (0..1) [0] VC Encoded Address Mode: (0..1) [0] Per-frame Route Priority: (0..1) [0] Long Distance Fabric: (0..1) [0] BB credit: (1..16) [16] Insistent Domain ID Mode (yes, y, no, n): [no] y Virtual Channel parameters (yes, y, no, n): [no] Switch Operating Mode (yes, y, no, n): [no] Zoning Operation parameters (yes, y, no, n): [no] RSCN Transmission Mode (yes, y, no, n): [no] Arbitrated Loop parameters (yes, y, no, n): [no] System services (yes, y, no, n): [no] Portlog events enable (yes, y, no, n): [no] Committing configuration...done. switch:admin> Displaying information You can display link incidents, registered listeners, node identification data, and FRU failures, as described in the following procedures. Link incidents The RLIR Extended Link Service (ELS) contains the link incident information sent to a listener N_Port. To display link incidents, connect to the switch, log in as user, and issue one of the following commands: • For the local switch: ficonshow rlir • For all switches defined in the fabric: ficonshow rlir fabric Registered listeners To display registered listeners for link incidents, connect to the switch, log in as user, and issue one of the following commands: • For the local switch: ficonshow lirr • For all switches defined in the fabric: ficonshow lirr fabric Node identification data To display node-identification data, connect to the switch, log in as user, and issue any of the following commands: • For the local switch: ficonshow switchrnid • For all switches defined in the fabric: ficonshow switchrnid fabric • For all devices registered with the local switch: ficonshow rnid • For all devices registered with all switches defined in the fabric: ficonshow rnid fabric 110 Administering FICON fabrics