HP StorageWorks 2/128 HP StorageWorks Fabric OS 5.X Procedures User Guide (AA- - Page 132
Viewing port information, Viewing the status of a port
View all HP StorageWorks 2/128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
For example: : switch:admin> uptime 4:43am up 1 day, 12:32, 1 user, load average: 1.29, 1.31, 1.27 switch:admin> The uptime command displays the length of time the system has been in operation, the total cumulative amount of uptime since the system was first powered-on, the date and time of the last reboot (applies only to Fabric OS 3.x and 2.6.x systems), the reason for the last reboot (applies only to Fabric OS 3.x and 2.6.x systems), and the load average over the past one minute (1.29 in the preceding example), five minutes (1.31 in the example), and 15 minutes (1.27 in the example). The reason for the last switch reboot is also recorded in the system message log. Viewing port information Use the commands that follow to view information about ports. Viewing the status of a port 1. Connect to the switch and log in as admin. 2. Issue the portShow command, specifying the number that corresponds to the port you are troubleshooting. In the following example, the status of port two is shown: switch:admin> portshow 2 portName: portHealth: HEALTHY Authentication: None portDisableReason: None portCFlags: 0x1 portFlags: 0x4903 PRESENT ACTIVE E_PORT G_PORT U_PORT LOGICAL_ONLINE LOGIN LED portType: 10.0 portState: 1 Online portPhys: 6 In_Sync portScn: 16 E_Port Trunk port port generation number: 351 portId: 290200 portIfId: 43020004 portWwn: 20:02:00:05:1e:34:01:be portWwn of device(s) connected: None Distance: normal portSpeed: N4Gbps Interrupts: 0 Link_failure: 50 Frjt: 0 Unknown: 0 Loss_of_sync: 55 Fbsy: 0 Lli: 524 Loss_of_sig: 54 Proc_rqrd: 0 Protocol_err: 0 Timed_out: 0 Invalid_word: 0 Rx_flushed: 0 Invalid_crc: 0 Tx_unavail: 0 Delim_err: 0 Free_buffer: 0 Address_err: 0 Overrun: 0 Lr_in: 100 Suspended: 0 Lr_out: 50 Parity_err: 0 Ols_in: 50 2_parity_err: 0 Ols_out: 52 CMI_bus_err: 0 switch:admin> See the HP StorageWorks Fabric OS 5.x command reference guide for additional portShow command information, such as the syntax for slot or port numbering. 132 Working with diagnostic features