HP StorageWorks 2/16V Brocade Fabric OS Message Reference - Supporting Fabric - Page 325

40 ISNS-1008 ISNS-1008 Message , [ISNS-1008], ,, INFO, , Peering with external iSNS server not started because configuration unchanged. Probable Cause Indicates that peering with the external iSNS server was already started with the same configuration. Recommended No action is required. You may change the configuration and retry the peering with the external Action iSNS server. Severity INFO ISNS-1009 Message , [ISNS-1009], ,, INFO, , Peering with external iSNS server not started because no virtual targets found. Probable Cause Indicates that no virtual targets were found, so peering was not started. Recommended No action is required. Peering will resume automatically when virtual targets are detected. Action Severity INFO ISNS-1010 Message , [ISNS-1010], ,, WARNING, , Slot/port /ge is out of range. Probable Cause Indicates that the slot or port is out of range. Recommended Retry with a valid slot/port. Refer to the appropriate hardware reference manual for valid slot and Action port ranges. Severity WARNING ISNS-1011 Message Probable Cause Recommended Action , [ISNS-1011], ,, INFO, , iSNS Client Service is . Indicates the current state of the internet storage name service (iSNS) Client as enabled or disabled. No action is required. Use the fosConfig command to display, enable, or disable the iSNS Client service. Fabric OS Message Reference 277 53-1000437-01