HP StorageWorks 2/16V Brocade Fabric OS Message Reference - Supporting Fabric - Page 404

63 SEC-1089 SEC-1089 Message , [SEC-1089], ,, ERROR, , Policy name was not found. Probable Cause Indicates that the security policy name in the secPolicyAdd command does not exist. Recommended Create the appropriate security policy first, then use its name in the secPolicyAdd command to add Action new members. Severity ERROR SEC-1090 Message , [SEC-1090], ,, ERROR, , SCC list contains FCS member. Please remove member from the FCS policy first. Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1091 Message , [SEC-1091], ,, ERROR, , No policy to remove. Probable Cause Indicates that the specified policy member does not exist or the policy itself does not exist. Recommended Verify that the security policy name or member ID is correct. Action Severity ERROR 356 Fabric OS Message Reference 53-1000437-01