HP StorageWorks 2000i HP StorageWorks P2000 G3 MSA System Event Description Re - Page 19
Enclosure parameters have been changed by a user.
View all HP StorageWorks 2000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
177 Informational Cache data was purged for the indicated missing volume. Recommended actions • No action required. 181 Informational The Ethernet configuration has been changed. Recommended actions • No action required. 182 Informational All disk channels have been paused. I/O will not be performed on the disks until all channels are unpaused. Recommended actions • If this event occurs in relation to disk firmware update, no action is required. When the condition is cleared, event 183 is logged. • If this event occurs and you are not performing disk firmware update, contact technical support. 183 Informational All disk channels have been unpaused, meaning that I/O can resume. An unpause initiates a rescan, which when complete is logged as event 19. This event indicates that a problem reported by event 182 is resolved. Recommended actions • No action required. 185 Informational An enclosure management processor (EMP) write command has completed. Recommended actions • No action required. 186 Informational Enclosure parameters have been changed by a user. Recommended actions • No action required. 187 Informational The write-back cache has been enabled. Recommended actions • Look for event 188. 188 Informational Write-back cache has been disabled. Recommended actions If event 187 is not logged within a reasonable amount of time, contact technical support. 189 Informational A disk channel that was previously degraded or failed is now healthy. Recommended actions • No action required. HP StorageWorks P2000 G3 MSA System Event Descriptions Reference Guide 19