HP StorageWorks 2000i HP StorageWorks 2000i G2 Modular Smart Array user guide - Page 32
Connecting remote management hosts, Connecting direct attach configurations
![]() |
View all HP StorageWorks 2000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
The 2312i Modular Smart Array and 2324i Modular Smart Array use Unified LUN Presentation (ULP) - a controller firmware feature enabling hosts to access mapped volumes via host ports - without the need for internal or external switches. Connecting direct attach configurations The 2312i G2 and 2324i G2 support up to four direct-connect server connections, two per controller. Connect appropriate cables from the servers' HBAs to the controller host ports as shown in the following illustrations. Single controller configuration One server/one HBA/single path Server 1 Dual controller configurations One server/one HBA/dual path Server 1 Two servers/one HBA per server/dual path Server 1 Server 2 Connecting remote management hosts The management host directly manages systems out-of-band over an Ethernet network. 1. Connect an Ethernet cable to the network port on each controller. 2. Connect the other end of each Ethernet cable to a network that your management host can access (preferably on the same subnet). NOTE: Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations. 32 Connecting hosts
![](/manual_guide/products/hewlettpackard-storageworks-2000i-hp-storageworks-2000i-g2-modular-smart-array-user-guide-481598002-2009-c5e9b4f/32.png)