HP StorageWorks 2000s NAS 2000s Release Notes - Page 17

Drive Letters on drive volume letters may be reassigned during quick restore After quick restore of the NAS 2000s, drive letters may be reassigned. Shares will still function against the reassigned drives but the reassignment may be unwanted. To reassign the drive letters to their original assignment, access Disks and Volumes via the Disks tab, right-click the drive in question, select change drive letter, and then edit. Quick Restore will not function when trying to QR on a broken mirror of the operating system When using quick restore on a system with a failed drive or rebuilding mirror set of the operating system drives, an error message will be displayed. Quick restore will not function with a failed or rebuilding mirror set. Resolution: Replace the failed drive and wait for the rebuild to finish. Drive Configuration The Quick Restore Process is designed to restore the operating system drives included in the HP StorageWorks NAS system. The two 36-GB drives in slots 0 and 1 make up the operating system drives. If the configuration of the two 36GB drives is altered, then the Quick Restore process may fail to complete properly resulting in the error: QuickRestore has detected a hardware failure within your system. NAS 2000s Release Notes 17