HP StorageWorks 4/256 Brocade Access Gateway Administrator's Guide v6.2.0 (53- - Page 69
Removing F_Ports from an N_Port
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Port configurations 4 13 13 id 14 14 id 15 15 id N4 Online N4 Online N4 Online N-Port 10:00:00:05:1e:35:10:1e 0x5a0a00 N-Port 10:00:00:05:1e:35:10:1e 0x5a0900 N-Port 10:00:00:05:1e:35:10:1e 0x5a0800 4. Enter the ag command with the --mapadd " operand to add the list of F_Ports to the N_Port. The f_portlist can contain multiple F_Port numbers separated by semicolons, for example "17;18". switch:admin> ag --mapadd 13 "6;7" F-Port to N-Port mapping has been updated successfully 5. Enter the ag --mapshow command with the n_portnumber operand to display the list of mapped F_Ports. Verify that the added F_Ports appear in the list. switch:admin> ag --mapshow 13 N_Port : 13 Failover(1=enabled/0=disabled) : 1 Failback(1=enabled/0=disabled) : 1 Current F_Ports : None Configured F_Ports : 6;7 PG_ID : 0 PG_Name : pg0 Removing F_Ports from an N_Port Removing F_Ports from an N_Port unassigns the F_Port. The F_Port status changes to Disabled. (No mapping for F_Port). 1. Connect to the switch and log in as admin. 2. Enter the ag --mapdel command with the operands to remove the list of F_Ports from the N_Port. switch:admin> ag --mapdel 13 "5;6" F-Port to N-Port mapping has been updated successfully 3. Enter the ag --mapshow command with the n_portnumber operand to display a list of mapped F_Ports. Verify that the F_Ports you removed are not in the list. switch:admin> ag --mapshow 13 N_Port : 13 Failover(1=enabled/0=disabled) : 1 Failback(1=enabled/0=disabled) : 1 Current F_Ports : None Configured F_Ports : 7 PG_ID : 0 PG_Name : pg0 Access Gateway Administrator's Guide 51 53-1001189-01