HP StorageWorks 4/256 Brocade Error Message Reference Guide v6.0.0 (53-1000600 - Page 242
FW-1165, FW-1166, FW-1167
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
29 FW-1165 Severity INFO FW-1165 Message , [FW-1165], ,, INFO, , , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of synchronization losses that the port experiences has fallen below the low boundary. Loss of synchronization errors frequently occur due to a faulty small form-factor pluggable (SFP) or cable. Signal losses often create synchronization losses. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. A low number of synchronization losses means that the switch is functioning normally. Severity INFO FW-1166 Message , [FW-1166], ,, WARNING, , , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of synchronization losses that the port experiences has risen above the high boundary. Loss-of-synchronization errors frequently occur due to a faulty small form-factor pluggable (SFP) or cable. Signal losses often create synchronization losses. Recommended Action Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs) are not faulty. If you continue to experience loss-of-synchronization errors, troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity WARNING FW-1167 Message , [FW-1167], ,, INFO, , , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of synchronization losses that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Loss of synchronization errors frequently occur due to a faulty small form-factor pluggable (SFP) or cable. Signal losses often create synchronization losses. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO 190 Fabric OS Message Reference 53-1000600-01