HP StorageWorks 4/256 Brocade Error Message Reference Guide v6.1.0 (53-1000600 - Page 471
SEC-1331, Policies. Use
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 471 highlights
66 SEC-1331 SEC-1331 Message , [SEC-1331], ,, ERROR, , Attempt to enable secure mode failed. Reason: . Probable Cause Indicates that the secModeEnable command failed on the fabric, because default IP Filter policies are not active on the switch, or an active transaction exists on IP Filter policies. Recommended Action Verify that the security event was planned. If the security event was planned, run the ipfilter --activate default_ipv4 or the ipfilter --activate default_ipv6 command to activate default IP Filter Policies. Use the ipfilter --save or the ipfilter --transabort commands to save or abort any active transaction on IP Filter policies. Then retry the secModeEnable command. Severity ERROR SEC-1332 Message , [SEC-1332], ,, ERROR, , Fabric wide policy is conflicting as is present in the fabric wide policy and 5.3 or 5.2 switches present in the fabric. Probable Cause Policy is conflicting. Recommended Please remove either FCS from fabric wide policy or 5.3 and 5.2 switches from the fabric, or set the Action fabric wide mode for FCS as Strict. Severity ERROR Fabric OS Message Reference 419 53-1000600-02