HP StorageWorks 4/64 Brocade Error Message Reference Guide v6.0.0 (53-1000600-
HP StorageWorks 4/64 - SAN Switch Manual
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 4/64 manual content summary:
- HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 1
53-1000600-01 19 October 2007 Fabric OS Message Reference Supporting Fabric OS v6.0.0 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 2
service names are or may be trademarks or service marks of, and are used to identify, products or services for its use. The authors and Brocade Communications Systems, Inc. shall have no liability or responsibility to please visit http://www.brocade.com/support/oscd. Export of technical data - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 3
Update software and hardware support March 2004 Fabric OS System Error Message 53-0000515-09 Updated for v4.4.0, Reference Manual First RASLog release August 2004 Fabric OS System Error Message 53-0000515-10 Added 22 ZONE messages Reference Manual April 2005 Fabric OS System Error Message 53 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 4
Date Fabric OS System Error Message 53-1000046-02 Minor updates to a few messages. Reference Manual June 2006 Fabric -Deleted USWD chapter. -Updated Introductory chapters. -Update throughout: rebranding, supported hardware, CLI changes. 15 June 2007 Fabric OS Message Reference 53-1000600- - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 5
One Message at a Time 7 Clearing the System Message Log 7 Configuring Event Auditing 7 Reading a RAS System Message 8 Audit Event Messages 9 Message Severity Levels 11 Responding to a System Message 11 Looking Up a System Message 11 Gathering Information About the Problem 12 Support - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 6
I RASLog Messages Section II Audit Log Messages Chapter 2 Chapter 3 AG System Messages AG-1001 25 AG-1002 25 AG-1003 25 AG-1004 26 AG 30 AG-1022 30 AG-1023 31 AG-1024 31 31 AUTH System Messages AUTH-1001 33 AUTH-1002 33 AUTH-1003 33 vi Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 7
AUTH-1004 34 AUTH-1005 34 AUTH-1006 34 AUTH-1007 34 AUTH-1008 35 AUTH-1010 35 AUTH-1011 35 AUTH-1012 36 AUTH-1013 36 AUTH-1014 36 AUTH-1016 36 AUTH-1017 37 AUTH-1018 37 AUTH-1020 37 AUTH-1022 38 AUTH-1023 38 AUTH-1025 39 AUTH-1026 39 AUTH-1027 39 AUTH-1028 40 AUTH-1029 40 AUTH- - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 8
Chapter 4 Chapter 5 BKSW System Messages BKSW-1003 47 BL System Messages BL-1000 49 BL-1001 49 BL-1002 49 BL-1003 50 BL-1004 50 BL-1006 50 BL-1007 51 BL-1008 51 BL-1009 51 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 9
BL-1035 60 BL-1036 60 Chapter 6 BLL System Messages BLL-1000 61 Chapter 7 BM System Messages BM-1001 63 BM-1002 63 BM-1003 BM-1056 66 BM-1058 67 Chapter 8 C2 System Messages C2-1001 69 C2-1002 69 C2-1004 69 C2-1005 70 Chapter 9 CDR System Messages CDR-1001 71 CDR-1002 71 CDR- - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 10
Chapter 11 CONF System Messages CONF-1000 75 CONF-1001 75 CONF-1020 75 CONF-1021 76 CONF-1022 76 CONF-1030 76 Chapter 12 EM System Messages EM-1001 77 EM-1002 77 EM-1003 77 EM-1004 78 EM-1005 78 EM-1006 79 EM-1007 79 EM-1008 79 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 11
91 EM-1061 91 EM-1062 92 EM-1063 92 EM-1064 92 EM-1065 93 EM-1066 93 EM-2003 93 Chapter 13 ESS System Messages ESS-1001 95 ESS-1002 95 ESS-1003 95 ESS-1004 96 ESS-1005 96 Chapter 14 EVMD - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 12
105 FABR-1022 106 FABR-1023 106 FABR-1024 106 FABR-1029 107 FABR-1030 107 FABR-1031 107 FABR-1032 108 Chapter 16 FABS System Messages FABS-1001 109 FABS-1002 109 FABS-1004 109 FABS-1005 110 FABS-1006 110 FABS-1007 111 FABS-1008 111 FABS-1009 111 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 13
112 FABS-1013 113 FABS-1014 113 FABS-1015 113 Chapter 17 FBC System Messages FBC-1001 115 Chapter 18 FCIP System Messages FCIP-1000 117 FCIP-1001 117 Chapter 19 FCMC System Messages FCMC-1001 119 Chapter 20 FCPD System Messages FCPD-1001 121 FCPD-1002 121 FCPD-1003 121 Chapter 21 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 14
FICN-1017 129 FICN-1018 130 FICN-1019 130 FICN-1020 130 FICN-1021 131 FICN-1022 131 FICN-1023 131 FICN-1024 131 FICN-1025 132 FICN-1026 132 FICN-1027 132 FICN-1028 132 FICN-1029 133 FICN-1030 133 FICN-1031 133 FICN-1032 133 FICN-1033 134 FICN-1034 134 FICN-1035 134 FICN-1036 135 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 15
147 FICN-1080 147 FICN-1081 147 FICN-1082 148 FICN-1083 148 FICN-1084 148 FICN-1085 148 FICN-1086 149 Chapter 23 FICU System Messages FICU-1001 151 FICU-1002 151 Fabric OS Message Reference xv 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 16
FICU-1004 152 FICU-1005 152 FICU-1006 152 FICU-1007 153 FICU-1008 153 FICU-1009 153 FICU-1010 154 Chapter 24 FKLB System Messages FKLB-1001 155 Chapter 25 FLOD System Messages FLOD-1001 157 FLOD-1003 157 FLOD-1004 157 FLOD-1005 158 FLOD-1006 158 Chapter 26 FSPF - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 17
FSSM-1004 166 Chapter 29 FW System Messages FW-1001 167 FW-1002 167 FW-1003 168 FW-1004 168 FW-1005 168 FW-1006 169 FW-1007 169 FW-1008 169 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 18
FW-1115 178 FW-1116 179 FW-1117 179 FW-1118 180 FW-1119 180 FW-1120 181 FW-1121 181 FW-1122 181 FW-1123 182 FW-1124 182 FW-1125 182 FW-1126 183 FW-1127 183 FW-1128 184 FW-1129 184 FW-1130 184 FW-1131 185 FW-1132 185 FW-1133 185 FW-1134 186 FW-1135 186 FW-1136 186 FW-1137 187 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 19
Fabric OS Message Reference 53-1000600-01 FW-1171 192 FW-1172 192 FW-1173 192 FW-1174 193 FW-1175 193 FW-1176 193 FW-1177 194 FW-1178 194 FW-1179 194 FW-1180 195 FW-1181 195 FW-1182 195 FW-1183 196 FW-1184 196 FW-1185 196 FW-1186 197 FW-1187 197 FW-1188 197 FW-1189 198 FW-1190 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 20
FW-1248 204 FW-1249 205 FW-1250 205 FW-1251 205 FW-1272 206 FW-1273 206 FW-1274 206 FW-1275 207 FW-1296 207 FW-1297 207 FW-1298 208 FW-1299 208 FW-1300 208 FW-1301 209 FW-1302 209 FW-1303 209 FW-1304 210 FW-1305 210 FW-1306 210 FW-1307 211 FW-1308 211 FW-1309 211 FW-1310 212 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 21
Fabric OS Message Reference 53-1000600-01 FW-1325 217 FW-1326 217 FW-1327 217 FW-1328 218 FW-1329 218 FW-1330 218 FW-1331 219 FW-1332 219 FW-1333 219 FW-1334 220 FW-1335 220 FW-1336 220 FW-1337 221 FW-1338 221 FW-1339 222 FW-1340 222 FW-1341 222 FW-1342 223 FW-1343 223 FW-1344 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 22
FW-1362 231 FW-1363 231 FW-1364 232 FW-1365 232 FW-1366 232 FW-1367 233 FW-1368 233 FW-1369 233 FW-1370 234 FW-1371 234 FW-1372 234 FW-1373 235 FW-1374 235 FW-1375 235 FW-1376 236 FW-1377 236 FW-1378 236 FW-1379 237 FW-1400 237 FW-1401 237 FW-1402 238 FW-1403 238 FW-1424 238 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 23
-1001 247 HAM-1002 247 HAM-1004 247 HAM-1005 248 HAM-1006 248 Chapter 31 HAMK System Messages HAMK-1001 251 HAMK-1002 251 HAMK-1003 251 HAMK-1004 252 Chapter 32 HIL System Messages HIL-1101 253 HIL-1102 253 HIL-1103 253 HIL-1104 254 HIL-1105 254 HIL - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 24
263 HIL-1508 264 HIL-1509 264 HIL-1510 264 HIL-1601 265 HIL-1602 265 HIL-1603 265 HIL-1650 265 Chapter 33 HLO System Messages HLO-1001 267 HLO-1002 267 HLO-1003 267 xxiv Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 25
ICPD-1003 277 ICPD-1004 278 ICPD-1005 278 ICPD-1006 278 ICPD-1007 278 ICPD-1008 279 Chapter 39 IPAD System Messages IPAD-1000 281 IPAD-1001 281 Chapter 40 IPS System Messages IPS-1001 283 IPS-1002 283 IPS-1003 283 IPS-1004 283 IPS-1005 284 IPS-1006 284 Fabric - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 26
Chapter 41 ISCS System Messages ISCS-1000 285 Chapter 42 ISNS System Messages ISNS-1001 287 ISNS-1002 287 ISNS-1003 287 ISNS-1004 288 ISNS-1005 288 ISNS-1006 288 ISNS-1008 289 ISNS-1009 289 ISNS-1010 289 ISNS-1011 289 ISNS-1013 290 ISNS-1014 290 Chapter 43 FCR System Messages FCR - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 27
Fabric OS Message Reference 53-1000600-01 FCR-1022 296 FCR-1023 296 FCR-1024 297 FCR-1025 297 FCR-1026 297 FCR-1027 298 FCR-1028 298 FCR-1029 298 FCR-1030 299 FCR-1031 299 FCR-1032 299 FCR-1033 299 FCR-1034 300 FCR-1035 300 FCR-1036 300 FCR-1037 300 FCR-1038 301 FCR-1039 301 FCR- - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 28
-1076 310 FCR-1077 310 FCR-1078 310 Chapter 44 KSWD System Messages KSWD-1003 311 Chapter 45 KTRC System Messages KTRC-1001 313 KTRC-1002 313 KTRC-1003 313 KTRC-1004 313 KTRC-1005 314 Chapter 46 LOG System Messages LOG-1000 315 LOG-1001 315 LOG-1002 315 LOG-1003 316 Chapter - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 29
327 MS-1009 328 MS-1021 328 MS-1022 328 MS-1023 329 MS-1024 329 Chapter 52 NBFS System Messages NBFS-1001 331 NBFS-1002 331 NBFS-1003 332 Chapter 53 NS System Messages NS-1001 333 NS-1002 333 NS-1003 333 NS-1004 334 NS-1005 334 Fabric OS - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 30
-1021 339 PDM-1022 340 PDM-1023 340 PDM-1024 340 Chapter 55 PDTR System Messages PDTR-1001 343 PDTR-1002 343 Chapter 56 PLAT System Messages PLAT-1000 345 PLAT-1001 345 PLAT-1002 345 Chapter 57 PORT System Messages PORT-1003 347 PORT-1004 347 PORT-1005 348 xxx Fabric OS Message - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 31
System Messages PS-1000 349 PS-1001 349 PS-1002 349 PS-1003 350 PS-1004 350 PS-1005 350 Chapter 59 PSWP System Messages PSWP-1001 351 PSWP-1002 351 PSWP-1003 351 Chapter 60 RAS System 355 RAS-3003 355 RAS-3004 355 Chapter 61 RCS System Messages RCS-1001 357 RCS-1002 357 RCS-1003 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 32
RPCD-1005 362 RPCD-1006 362 RPCD-1007 362 Chapter 63 RTWR System Messages RTWR-1001 363 RTWR-1002 363 RTWR-1003 364 Chapter 64 SAS System Messages SAS-1001 365 Chapter 65 SCN System Messages SCN-1001 367 Chapter 66 SEC System Messages SEC-1001 369 SEC-1002 369 SEC-1003 370 SEC - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 33
Fabric OS Message Reference 53-1000600-01 SEC-1032 375 SEC-1033 375 SEC-1034 375 SEC-1035 376 SEC-1036 376 SEC-1037 376 SEC-1038 376 SEC-1040 377 SEC-1041 377 SEC-1042 377 SEC-1043 378 SEC-1044 378 SEC-1045 378 SEC-1046 379 SEC-1049 379 SEC-1050 379 SEC-1051 380 SEC-1052 380 SEC- - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 34
SEC-1079 386 SEC-1080 387 SEC-1081 387 SEC-1082 387 SEC-1083 388 SEC-1084 388 SEC-1085 388 SEC-1086 389 SEC-1087 389 SEC-1088 389 SEC-1089 390 SEC-1090 390 SEC-1091 390 SEC-1092 391 SEC-1093 391 SEC-1094 391 SEC-1095 392 SEC-1096 392 SEC-1097 392 SEC-1098 393 SEC-1099 393 SEC- - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 35
Fabric OS Message Reference 53-1000600-01 SEC-1121 399 SEC-1122 399 SEC-1123 399 SEC-1124 399 SEC-1126 400 SEC-1130 400 SEC-1135 400 SEC-1136 401 SEC-1137 401 SEC-1138 401 SEC-1139 402 SEC-1142 402 SEC-1145 402 SEC-1146 403 SEC-1153 403 SEC- - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 36
SEC-1182 410 SEC-1183 410 SEC-1184 411 SEC-1185 411 SEC-1186 411 SEC-1187 412 SEC-1188 412 SEC-1189 412 SEC-1190 413 SEC-1191 413 SEC-1192 413 SEC-1193 414 SEC-1194 414 SEC-1195 414 SEC-1196 415 SEC-1197 415 SEC-1198 415 SEC-1199 416 SEC-1200 416 SEC-1201 416 SEC-1202 417 SEC- - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 37
-1001 429 SNMP-1002 429 SNMP-1003 429 SNMP-1004 430 SNMP-1005 430 SNMP-1006 430 Chapter 68 SS System Messages SS-1000 431 SS-1001 431 SS-1002 431 SS-1003 432 Chapter 69 SULB System Messages SULB-1001 433 SULB-1002 433 Fabric OS Message Reference 53-1000600-01 xxxvii - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 38
444 SULB-1030 444 SULB-1031 444 SULB-1033 445 SULB-1034 445 SULB-1035 445 SULB-1036 446 SULB-1037 446 Chapter 70 SWCH System Messages SWCH-1001 447 SWCH-1002 447 SWCH-1003 447 SWCH-1004 448 SWCH-1005 448 SWCH-1006 448 SWCH-1007 449 SWCH-1008 449 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 39
454 SYSM-1005 454 SYSM-1006 454 SYSM-1007 454 Chapter 73 TRCE System Messages TRCE-1001 455 TRCE-1002 455 TRCE-1003 456 TRCE-1004 456 1009 458 TRCE-1010 458 TRCE-1011 458 TRCE-1012 459 Chapter 74 TRCK System Messages TRCK-1001 461 TRCK-1002 461 TRCK-1003 461 TRCK-1004 462 TRCK - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 40
471 WEBD-1003 471 WEBD-1004 472 WEBD-1005 472 WEBD-1006 472 WEBD-1007 472 WEBD-1008 473 Chapter 79 ZOLB System Messages ZOLB-1001 475 Chapter 80 ZONE System Messages ZONE-1002 477 ZONE-1003 477 ZONE-1004 478 ZONE-1005 478 ZONE-1006 479 ZONE-1007 479 ZONE-1008 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 41
ZONE-1040 489 ZONE-1041 489 ZONE-1042 489 ZONE-1043 489 ZONE-1044 490 ZONE-1045 490 ZONE-1046 490 Chapter 81 AUDIT AUTH System Messages AUTH-3001 491 AUTH-3002 491 AUTH-3003 491 AUTH-3004 492 AUTH-3005 492 Fabric OS Message Reference xli 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 42
AUTH-3006 492 AUTH-3007 493 AUTH-3008 493 Chapter 82 AUDIT CONF System Messages CONF-1000 495 CONF-1020 495 CONF-1022 495 Chapter 83 AUDIT HTTP System Messages HTTP-1002 497 HTTP-1003 497 Chapter 84 AUDIT SEC System Messages SEC-3001 499 SEC-3002 499 SEC-3003 500 SEC-3004 500 SEC - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 43
-3045 512 SEC-3046 512 SEC-3047 512 SEC-3048 513 SEC-3049 513 Chapter 85 AUDIT SNMP System Messages SNMP-1004 515 SNMP-1005 515 SNMP-1006 515 Chapter 86 AUDIT SULB System Messages SULB-1001 517 SULB-1002 517 SULB-1003 517 SULB-1004 518 SULB-1009 518 SULB-1010 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 44
SULB-1030 526 SULB-1031 527 SULB-1032 527 SULB-1033 527 SULB-1034 527 SULB-1035 528 SULB-1037 528 Chapter 87 AUDIT ZONE System Messages ZONE-3001 529 ZONE-3002 529 ZONE-3003 530 ZONE-3004 530 ZONE-3005 530 ZONE-3006 531 ZONE-3007 531 ZONE-3008 531 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 45
ZONE-3025 537 Fabric OS Message Reference xlv 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 46
xlvi Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 47
Document This document is a system message reference manual written to help system administrators and technicians operate, maintain, and troubleshoot SAN products. "About This Document" contains the following sections: • How This Document Is Organized xlvii • Supported Hardware and Software xlvii - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 48
here apply to some switches but not to others, this guide identifies exactly which switches are supported and which are not. Although many different software and hardware configurations are tested and supported by Brocade Communications Systems, Inc. for Fabric OS v6.0.0, documenting all possible - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 49
names in the narrative portions of this guide are presented in mixed lettercase: for command lettercase is often all lowercase. Otherwise, this manual specifically notes those cases in which a command For definitions of storage area network (SAN)-specific terms, visit the Storage Networking Industry - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 50
• Fabric OS iSCSI Gateway Service Administrator's Guide • Fabric OS MIB Reference • Fabric OS Message Reference • Brocade Glossary Optional Applications • Web Tools Administrator's Guide • Fabric Watch Administrator's Guide • Fabric Manager Administrator's Guide • Secure Fabric OS Administrator - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 51
protocol (FCIP) Tunneling Service enables Fibre Channel frames to "tunnel" through IP networks by dividing frames, encapsulating the result in IP packets on entering the tunnel, and then reconstructing them as they leave the tunnel. Fabric OS supports storage applications for Fibre Channel, storage - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 52
- Detailed description of the problem and specific questions - Description of any troubleshooting steps already performed and results - Serial console and telnet session logs - syslog message logs 2. Switch Serial Number The switch serial number and corresponding bar code - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 53
Chapter Introduction to System Messages 1 This guide supports Fabric OS v6.0.0 and documents system messages that can help you diagnose and fix problems with a switch or fabric. The messages are organized first by event type, reliability, availability, and serviceability log (RASLog) or AUDIT, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 54
from two logical switches as a single file and in sequential order. See "System Logging Daemon (syslogd)" on page 3 for more information. EVENT AUDITING Event auditing is designed to support post-event audtis and problem determination based on high-frequency events of certain types such as security - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 55
system events and error messages to log files on a remote host system. The host system can be running UNIX, Linux, or any other operating system that supports functionality, refer to the Fabric OS Administrator's Guide. SYSTEM CONSOLE The system console displays messages only through the serial port. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 56
lost over power cycles and troubleshoot device connections. Viewing and Configuring System Message Logs This section provides information on viewing and configuring system message logs, including: • Viewing System Messages from Web Tools 6 • Dumping System Messages 6 • Viewing System Messages One - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 57
Set or display diagnostic POST (Power-On Self-Test) configuration. to oldest. errFilterSet Sets an error severity filter for the system console. errShow Displays the entire error log, with page breaks . supportFtp Sets, clears, or displays support FTP parameters or a time interval to check - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 58
commands. This output is used by your switch service provider to diagnose and correct problems with the switch. The output from this command trace triggers. VIEWING SYSTEM MESSAGES FROM WEB TOOLS To view the system message log for a switch from Web Tools: 1. Launch Web Tools. 2. Select the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 59
, switch, Sfp Supply Voltage 0, is below low boundary(High=3600, Low=3150). Current value is 0 mV. switch:admin> VIEWING SYSTEM MESSAGES ONE MESSAGE AT A TIME To display the system message log one message at a time: 1. Log in to the switch as admin. 2. At the command line, enter the errShow command - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 60
33 Date and Time Stamp [EM-1031] Message Module and Message Number The system time (UTC) when the message was generated on the switch. The RASLog subsystem will support an internationalized timestamp format base on the "LOCAL" setting. Displays the message module and number. These values uniquely - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 61
sequence number will continue to increase beyond the storage limit of 1024 messages. The sequence number can command. The sequence number is persistent across power cycles and switch reboots. For most messages, system related information of interest for post event auditing and problem determination - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 62
flag Identifies the message as an Audit message. Date and Time Stamp The system time (UTC) when the message was generated on the switch. The RASLog subsystem will support an internationalized timestamp format base on the "LOCAL" setting. Message Module and Message Number Displays the message - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 63
messages, including: • Looking Up a System Message 11 • Gathering Information About the Problem 12 • Support 12 • Panic Dump and Core Dump Files 12 • Trace Dumps 13 • supportSave Command 13 LOOKING UP A SYSTEM MESSAGE Error messages in this manual are arranged alphabetically. To look up an - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 64
DCX, 12000, 24000, or 48000) 13. What and when were the last actions or changes made to the system? SUPPORT Fabric OS create a number of files that can help support personnel troubleshoot and diagnose a problem This section describes those files and how to access and/or save the information for - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 65
to a specified remote location to provide to support when requested. SUPPORTSAVE COMMAND The supportSave command can be used to send the output of the system messages (RASLog), the trace files, and the output of the supportShow command to an off-switch storage location via FTP. Prior to running the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 66
tool that is compatible with different types of fabrics, including Brocade-, Cisco-, and McDATA-based fabrics. AUTH Authentication error messages indicate problems of the system using the environmental and power policies. EM reflects system status by way of CLI commands, system light emitting - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 67
a component and a service. A component is a module in the Fabric OS, implementing a related set of functionality. A service is a collection of performs system-level control of the iSCSI Gateways. Its functions include: initialization, message delivery from iSCSI protocol clients, system error - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 68
• Security daemon (secd) • SNMP daemon (snmpd) • Time Service daemon (tsd) • TRACE daemon (traced) • Track Changes daemon (trackd) • Web tools daemon (webd) Kernel RAS trace module. RASLog subsystem. The link state database is a part of the FSPF protocol that maintains records on the status of port - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 69
protocol that handles a neighboring or adjacent switch's finite state machine (FSM). Input to the FSM changes the local switch from one state to another, based hardware problems. PORT size/roll over warning. The reliable commit service Storage application services supporting director-class storage - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 70
ZOLB ZONE System Module Descriptions (Continued) Description Simple Network Management Protocol is a universally supported low-level protocol that allows OS Command Reference or the Fabric OS Administrator's Guide. Time Service provides fabric time-synchronization by synchronizing all clocks in - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 71
including: • AG System Messages 25 • AUTH System Messages 33 • BKSW System Messages 47 • BL System Messages 49 • BLL System Messages 61 • BM System Messages 63 • C2 System Messages 69 • CDR System Messages 71 • CER System Messages 73 • CONF System Messages 75 • EM System Messages 77 • ESS - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 72
• ISNS System Messages 287 • KSWD System Messages 311 • KTRC System Messages 313 • LOG System Messages 315 • LSDB System Messages 317 • MFIC System Messages 319 • MPTH System Messages 321 • MQ System Messages 323 • MS System Messages 325 • NBFS System Messages 331 • NS System Messages 333 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 73
• TRCK System Messages 461 • TS System Messages 463 • UCST System Messages 467 • UPTH System Messages 469 • WEBD System Messages 471 • ZOLB System Messages 475 • ZONE System Messages 477 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 74
- HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 75
section provides the Audit messages, including: • AUDIT AUTH System Messages 491 • AUDIT CONF System Messages 495 • AUDIT HTTP System Messages 497 • AUDIT SEC System Messages 499 • AUDIT SNMP System Messages 515 • AUDIT SULB System Messages 517 • AUDIT ZONE System Messages 529 Section II - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 76
- HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 77
command and contact your switch service provider. Severity WARNING AG-1003 Message , [AG-1003], ,, WARNING, , Unable to failover N_Port . Failover across different fabrics is not supported. Probable Cause Failover across N_Ports connected - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 78
to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AG-1005 Message , [AG-1005], ,, WARNING, , FDISC response was dropped because F_Port is offline. Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 79
) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1009 Message , [AG-1009], ,, WARNING, , Sending FLOGI failed on N_Port . Probable Cause Failure sending Fabric Login - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 80
set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1013 Message , [AG-1013], ,, INFO, , F_Ports mapped to N_Port failed over to other N_Port(s). Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 81
set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1016 Message , [AG-1016], ,, INFO, , Failing over F_Ports mapped to N_Port to other N_Port(s). Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 82
mapping. Action Severity INFO AG-1021 Message , [AG-1021], ,, WARNING, , Unable to do Preferred-Failover of F_Port . Failover across different fabric is not supported. Probable Cause Failover across N_Ports connected to different fabrics is not - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 83
--mapshow command to display updated F_Port to N_Port mapping. Action Severity INFO AG-1024 Message , [AG-1024], ,, INFO, , F_Port is failed back to its preferred N_Port . Probable Cause Indicates that the specified N_Port is failing back - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 84
2 32 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 85
set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1003 Message , [AUTH-1003], ,, INFO, , type has been successfully set to . Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 86
run the supportSave command and contact your switch service provider. Severity WARNING AUTH-1007 Message Probable Cause , [AUTH-1007], ,, ERROR, , The proposed authentication protocol(s) are not supported: port . Indicates that the proposed - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 87
sure the local switch supports the specified protocols: Fibre channel authentication protocol (FCAP) or Diffie Hellman - challenge handshake authentication protocol (DH-CHAP). Severity ERROR AUTH-1008 Message , [AUTH-1008], ,, ERROR, , No security license - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 88
supportSave command and contact your switch service provider. Severity WARNING AUTH-1014 Message , [AUTH-1014], , FFDC, ERROR, , Invalid port value to : port . Probable Cause Indicates an internal problem with the Secure Fabric OS - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 89
the supportSave command and contact your switch service provider. Severity ERROR AUTH-1018 Message , [AUTH-1018], ,, ERROR, , Invalid value to check protocol type: port . Probable Cause Indicates an internal problem with the Secure Fabric OS - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 90
and contact your switch service provider. Severity INFO AUTH-1022 Message , [AUTH-1022], ,, ERROR, , Failed to extract operations for Diffie Hellman - challenge handshake authentication Protocol (DH-CHAP). response calculation, challenge generation, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 91
Action Usually this problem is transient. The service provider. Severity ERROR AUTH-1026 Message , [AUTH-1026], ,, WARNING, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 92
and contact your switch service provider. Severity ERROR AUTH-1028 Message , [AUTH-1028], ,, ERROR, , Failed to that failed to get memory. Recommended Action Usually this problem is transient. The authentication might fail. Reinitialize authentication - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 93
contact your switch service provider. Severity ERROR AUTH-1031 Message , [AUTH-1031], ,, ERROR, , Failed to random value used in authentication protocols to prevent replay attacks. Recommended Action Usually this problem is transient. The authentication - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 94
command and contact your switch service provider. Severity ERROR AUTH-1035 Message , [AUTH-1035], ,, ERROR, , Invalid - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 95
up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1038 Message , [AUTH-1038], ,, ERROR, , Failed to retrieve certificate during : port . Probable - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 96
up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1042 Message Probable Cause , [AUTH-1042], ,, ERROR, , Port has been disabled, because authentication failed with code - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 97
service provider. Severity ERROR AUTH-1043 Message , [AUTH-1043], ,, ERROR, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 98
3 AUTH-1044 46 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 99
be of interest to the customer regarding the state of the system. Refer to the string at the end of the error to PID > Probable Cause: One of the critical daemons is found to be nonresponsive service provider. Severity WARNING Fabric OS Message Reference 47 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 100
4 BKSW-1003 48 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 101
1000 Message , [BL-1000], ,, INFO, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 102
1003 Message , [BL-1003], , FFDC, CRITICAL, , Faulting blade in slot . Probable Cause Indicates a to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 103
1008 Message , [BL-1008], , FFDC, CRITICAL, , Slot control-plane failure. Expected value: 0x - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 104
WARNING BL-1011 Message , [BL-1011], , FFDC, CRITICAL, , Busy with emb-port int. for chip in minis < that the blade or switch does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. On a - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 105
run the slotPowerOff and slotPowerOn commands. On a nonbladed switch, reboot or power cycle the switch. If the message persists, replace the blade or BL-1013 Message , [BL-1013], ,, ERROR, , bport port is faulted. status=0x - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 106
if there is a hardware error. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. If there is a hardware error, Message Probable Cause , [BL-1016], , FFDC, CRITICAL, , Blade port in slot failed to enable - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 107
command to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Indicates that the slot had internal ports not online and that the system is retrying to bring the ports that failed back online. Recommended - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 108
internal ports not online and that the system is retrying to bring the ports one or more of the internal ports was not online. The switch is faulted. Recommended Action Reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 109
blade was reset before the initialization completed. Recommended Action Reboot or power cycle the blade. If the message persists, replace the blade. Severity CRITICAL BL-1024 Message , [BL-1024], ,, INFO, , All ports on the blade in slot - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 110
reboot switch and run the diagPost command to ensure Action Power-On Self-Test (POST) is enabled. If problem persists, replace switch. Severity CRITICAL BL-1027 Message , [BL-1027], ,, CRITICAL, , Blade in slot faulted, boot failed; status - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 111
>, [BL-1031], ,, CRITICAL, , Link timeout in internal port (slot - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 112
Cause Indicates that the system timed out while waiting for disable messages from the user ports after disabling the ports. Recommended Action Reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Run the diagPost command - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 113
Messages Chapter 6 BLL-1000 Message , [BLL-1000], , FFDC, CRITICAL, , ASIC driver detected Slot port as faulty (reason: ) Probable Cause Indicates that a blade regulation problem was reported on the specified slot - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 114
6 BLL-1000 If the message persists, replace the blade. Severity CRITICAL 62 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 115
, BM protocol version - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 116
. On the Brocade Action DCX, 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1006 Message , [BM-1006], ,, INFO, , Blade is not configured. Persistently disabling all ports for blade in slot - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 117
blade. On the Brocade Action 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1010 Message , [BM-1010], ,, INFO, , Resetting port configuration and linkcost for all ports for blade in slot - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 118
. On the Brocade Action DCX, 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1056 Message , [BM-1056], ,, INFO, , AP is not configured. Persistently disabling all ports on the switch. 66 Fabric - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 119
time the application processor (AP) blade is detected. This may be cause by one of the following: • The AP was detected for the first time on this version running on the AP was detected to be different from system firmware due to a firmware upgrade. Recommended Issue the firmwareDownload command - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 120
7 BM-1058 68 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 121
-1001], ,, ERROR, , Port port fault (the configured speed may not be supported by the SFP). Please change the Whenever this error is observed, reboot the system at the next maintenance window. If the problem Action persists, replace the blade. Severity - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 122
8 C2-1005 C2-1005 Message , [C2-1005], ,, ERROR, , Rate limit configuration is not effective on S() user port because QoS license is not present. Probable Cause Indicates that the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 123
a compatible one or change the configuration. Severity ERROR CDR-1002 Message , [CDR-1002], , FFDC, ERROR, , Port Whenever this error occurs, reboot the system at the next maintenance window. If the problem Action persists, replace the blade. Fabric - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 124
in the application specific integrated circuit (ASIC) hardware that may degrade data traffic. Recommended Whenever this error occurs, reboot the system at the next maintenance window. If the problem Action persists, replace the blade. Severity ERROR 72 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 125
Messages 10 CER-1001 Message , [CER-1001], ,, ERROR, , HA Sync broken, since standby Advanced Performance Tuning module does not support FICON Management Server (FMS). Probable Cause Indicates that the high-availability (HA) synchronization between - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 126
10 CER-1001 74 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 127
Chapter CONF System Messages 11 CONF-1000 Message , [CONF-1000], , AUDIT, INFO, , configDownload 1001 Message , [CONF-1001], ,, INFO, , configUpload completed successfully. . - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 128
Message , [CONF-1022], ,, INFO, , Downloading configuration without disabling the switch was unsuccessful. the configuration without disabling the switch was unsuccessful because there are one or more parameters that require the switch to be disabled. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 129
system has overheated and may shut down. All fan speeds are dumped to the console. Recommended Action Verify that the location temperature is within the operational range of the switch. Refer to the hardware reference manual or power cycle the switch. Fabric OS Message Reference 77 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 130
, 4020, and 4024 have four fans and one power supply, but these parts cannot be replaced: the -1005], , FFDC, CRITICAL, , has faulted. Sensor(s) problem is isolated to the blade itself, replace the blade. Voltage problems on a blade are likely a hardware problem - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 131
on the blade; replace the blade. If this problem occurs on a switch, it usually indicates a hardware problem on the main board; replace the switch. Severity CRITICAL EM-1007 Message , [EM-1007], , FFDC, CRITICAL, , is being reset. Sensor(s) has - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 132
the FRU. Refer to the Brocade 48000 Hardware Reference Manual for more information about chassisConfig modes and supported blades. Severity CRITICAL EM-1010 Message , [EM-1010], , FFDC, CRITICAL, , Received unexpected power down for But - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 133
system-name>, failed state transition, FRU faulted. Probable Cause Indicates that a switch blade or nonbladed switch failed to transition from one reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Refer - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 134
problem persists, a reBoot or power cycle is required to resolve the Action problem. Severity WARNING EM-1016 Message , [EM-1016], ,, WARNING, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 135
option is not supported by the firmware on system-name>, HIL Error: failed to access history log for FRU: (rc=). Probable Cause Indicates a problem accessing the data on the world-wide name (WWN) card field-replaceable unit (FRU), or the WWN card storage - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 136
is being retried. Probable Cause Indicates that the I2C bus had problems and a timeout occurred. Recommended Action This is often a transient manual for instructions on inserting the switch blades. Severity ERROR EM-1033 Message , [EM-1033], ,, ERROR, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 137
not have hardware problems. Refer to >,, ERROR, , 2 circuit paired Power Supplies are faulty power. Probable Cause Suggests that since both Power Supplies associated with one of the 2 main circuits are present but faulty, maybe the circuit's switch has been turned off, or the AC power - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 138
persists, reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Refer to the ,, INFO, , is no longer faulted. Probable Cause Indicates that the specified Power Supply has been marked as - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 139
not responding to commands and should be replaced. Action Severity WARNING EM-1044 Message , [EM-1044], ,, WARNING, , Can't power on , its logical switch is shut down Probable Cause Indicates that the specified field-replaceable unit (FRU) cannot - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 140
EM-1045 Message , [EM-1045], ,, WARNING, , is being powered . Probable Cause Indicates that an automatic power adjustment is being made because of the (predicted) failure of a power supply or the insertion or removal of a port blade - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 141
12 EM-1048 EM-1048 Message , [EM-1048], ,, INFO, , I2C access recovered: state Probable Cause Indicates that the I2C bus problems have been resolved and I2C access to the field-replaceable unit (FRU) has become available again. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 142
speed. If the port media is extended long wavelength, move it to a port that can support the heat generated. Severity WARNING EM-1056 Message , [EM-1056], ,, WARNING, , : Port faulted. Reason: . Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 143
due to blade incompatibility with software version on standby CP. Probable Cause A blade in the system is not supported by the release on the standby control processor (CP). Recommended Action Please remove all blades of this type or upgrade your standby CP. Once an - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 144
CRITICAL, , Blade: is being powered off (based on user power off since a hardware (HW) application specific integrated circuit (ASIC) ERROR was detected, and the user has selected to power off the problem blade when such a condition occurred. Recommended Contact support - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 145
as root to view this log. The slot will be 0 for non-bladed systems. Recommended Action On bladed systems, try reseating the specified FRU. On nonbladed switches, reboot or power cycle the switch. If the problem persists: • Run the systemVerification command to verify that the switch does not have - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 146
12 EM-2003 94 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 147
, [ESS-1001], ,, WARNING, , A few switches in the fabric do not support the Coordinated HotCode protocol. Probable Cause One or more switches in the fabric do not support the Coordinated HotCode protocol. Continuing with the firmware download may cause data - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 148
Severity WARNING ESS-1005 Message , [ESS-1005], ,, WARNING, , The resume retry count is exhausted for the domain . Probable Cause During the Coordinated HotCode protocol, a switch in the fabric did not accept the resume message which prevented - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 149
Messages 14 EVMD-1001 Message , [EVMD-1001], ,, WARNING, , Event could not be sent to remote proxy. = Probable Cause The event could not be sent to the remote proxy - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 150
14 EVMD-1001 98 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 151
mismatched configuration parameters. Recommended Action Based on the segmentation reason displayed system-name>, port : ILS bad size , wanted . Probable Cause Indicates that an internal link service (ILS) information unit of invalid size - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 152
and contact your switch service provider. Severity WARNING FABR-1004 Message , [FABR-1004], ,, WARNING, , port: < to a one-time event because of the incoming data, the system will discard the frame. If it is due to problems with the kernel, the system will - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 153
contact your switch service provider. Severity WARNING FABR-1007 Message , [FABR-1007], ,, WARNING, , IU free and usually indicates a problem with the Fabric OS. Recommended Action In case of severe memory corruption, the system might recover by - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 154
up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR FABR-1012 Message , [FABR-1012], ,, WARNING, , : no such type, . Probable Cause Indicates that the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 155
. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action The system will recover by failing over to the standby CP your switch service provider. Severity CRITICAL FABR-1014 Message , [FABR-1014], , FFDC, ERROR, , Port - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 156
user interface command. Recommended No action is required. Action Severity WARNING FABR-1017 Message , [FABR-1017], ,, WARNING, , ficonMode is disabled. Probable Cause Indicates that FICON mode is disabled on the switch through a user interface command - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 157
FFDC, CRITICAL, , Critical fabric size () exceeds supported configuration (). Probable Cause Web Tools is disabled. Recommended Action Bring the fabric size within the licensed limits. Either a full fabric license must be added or the size of - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 158
>, FFDC, CRITICAL, , Fabric size () exceeds supported configuration (). Fabric limit timer complete and the size of the fabric is still outside the specified limit, Web Tools is disabled. Recommended Action Bring the fabric size within the licensed - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 159
protocol, that uses R_RDY primitive for flow control. • DUAL_CR mode: Dual-credit flow control mode. In both of the previous modes, the buffer credits are fixed, based ], ,, INFO, , fabric: Domain - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 160
15 FABR-1032 FABR-1032 Message , [FABR-1032], , FFDC, WARNING, , Remote switch with domain ID and switchname running an unsupported FOS version v2.x has joined the fabric. Probable Cause Indicates that a - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 161
any whole number. Recommended Reboot or power cycle the switch. Action Severity CRITICAL FABS-1002 Message , [FABS-1002], ,, WARNING, , Probable Cause Indicates that an internal problem has been detected by the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 162
values for function name and description of problem are: fabsys_write: Unsupported write operation: process xxx where "xxx" is the process ID (PID), which could be any whole number. Recommended Action Reboot or power cycle the active CP (for modular systems) or the switch (for single-board - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 163
object handle. This is usually an internal Fabric OS problem or file corruption. Recommended Reboot or power cycle the switch. Action Severity WARNING FABS-1009 Message , [FABS-1009], ,, WARNING, , : type is not media Probable Cause - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 164
Probable Cause A FRU could not be transitioned to the requested state. This is usually an internal Fabric OS problem. Recommended Action Reboot or power-cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware. Severity ERROR 112 Fabric OS Message - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 165
blade may not be supported by this platform or Fabric OS version. Recommended Action Verify that the blade is valid for use in this system and this version of internal Fabric OS problem. Recommended Action Try removing and reinserting the FRU. Reboot or power-cycle the CP or system. If the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 166
16 FABS-1015 114 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 167
-number>,, ERROR, , Firmware version on AP and CP blades cannot communicate. Recommended Action The problem can be corrected by changing the version of firmware notes to determine whether a non-disruptive firmwareDownload is supported between the versions. As the AP and CP blades - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 168
17 FBC-1001 116 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 169
Chapter FCIP System Messages 18 FCIP-1000 Message , [FCIP-1000], , FFDC, ERROR, , of GE < 1001 Message , [FCIP-1001], , FFDC, ERROR, , FIPS failed; algo= type=< - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 170
18 FCIP-1001 118 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 171
19 FCMC-1001 Message , [FCMC-1001], , FFDC, CRITICAL, , System is low on memory and has failed to allocate new memory. Probable Cause Indicates that the switch is low on memory and failed to allocate - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 172
19 FCMC-1001 120 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 173
sequence-number>,, WARNING, , Probing failed on . Probable Cause Indicates that a fibre channel protocol (FCP) switch probed devices number>,, INFO, , Probing failed on which is possibly a private device which is not supported in this port type - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 174
20 FCPD-1003 122 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 175
Messages 21 FCPH-1001 Message , [FCPH-1001], , FFDC, CRITICAL, , : failed, out of memory condition Probable Cause Indicates that the switch is low on memory and failed to allocate new - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 176
21 FCPH-1001 124 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 177
Chapter FICON System Messages 22 The FICON messages in this chapter include byte hexidecimal value that represents the domain of the switch that the FICON Channel is directly connected to. HP - Host Port number: This is a 1 byte hexidecimal value that represents the switch port of the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 178
ID Emulation Enabled or Disabled>. Probable Cause User changed the configuration manually. Recommended No action is required. Action Severity INFO FICN-1006 Message , [FICN-1006], ,, WARNING, , FICON GEPort < 0 or 1 - GE port number> TID - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 179
there was a job failure associated with this event, please contact your vendor's customer support. Action Severity ERROR FICN-1008 Message , [FICN-1008], ,, ERROR, , DevDiskEgr:FICON Purge Path received Path=. Probable Cause FICON Purge Path - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 180
or IO failure associated with this event, please contact your vendor's customer Action support for assistance. Severity ERROR FICN-1013 Message Probable Cause , [FICN-1013], ,, INFO, , DevDiskIng:Status=0x - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 181
a job or IO failure associated with this event, please contact your vendor's customer Action support for assistance. Severity INFO FICN-1014 Message , [FICN-1014], ,, INFO, , DevEgr:Device level exception flag found for Path=: Oxid=0x - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 182
associated with a FICON Control Unit CUADDR. Recommended Please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1019 Message , [FICN-1019], ,, ERROR, , DevTapeEgr:AS Link Level Reject (LRJ) from Chan on Path= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 183
job failure associated with this event, please contact your vendor's Action customer support for assistance. Severity ERROR FICN-1022 Message , [FICN-1022], ,, ERROR, , DevTapeEgr:FICON Selective Reset:Path= State=0x - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 184
failure or IO Error associated with this event, please contact your Action vendor's customer support for assistance. Severity INFO FICN-1027 Message , [FICN-1027], ,, ERROR, , DevTapeIng:Device level exception found for Path=: Oxid=0x - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 185
or IO Error associated with this event, please contact your Action vendor's customer support for assistance. Severity ERROR FICN-1030 Message , [FICN-1030], ,, ERROR, , HostDiskIng:FICON Purge received:Path=. Probable Cause An active disk - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 186
device/CU side processing. Recommended Please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1035 Message , [FICN-1035], ,, WARNING, , HostIng:FICON System Reset received on Path=. Probable Cause A locally - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 187
be associated with a FICON device. Recommended Please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1039 Message , [FICN-1039], ,, ERROR, , HostIng:FCUB Lookup failed for Path=. Probable Cause A locally - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 188
failure or IO Error associated with this event, please contact your Action vendor's customer support for assistance. Severity ERROR FICN-1041 Message , [FICN-1041], ,, ERROR, , HostTapeEgr:AS Link Level Reject (LRJ) from CU Rx Path= LastCmd - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 189
Cause Protocol errors in emulation in the CU or network errors can cause Selective Reset. Recommended If this was an unexpected event, please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1044 Message , [FICN-1044], ,, ERROR, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 190
job. Recommended This is an unexpected event, please contact your vendor's customer support for assistance. Action Severity WARNING FICN-1049 Message , [FICN-1049], ,, WARNING, , ProcessIngTirData:Lost Logical Path for Path= Index= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 191
device. Recommended If this was an unexpected event, please contact your vendor's customer support for assistance. Action Severity INFO FICN-1053 Message , [FICN-1053], ,, INFO, , XRC Withdraw From Session: SessID=, Path= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 192
. Recommended If this was an unexpected event, please contact your vendor's customer support for assistance. Action Severity WARNING FICN-1056 Message , [FICN-1056], ,, ERROR, , FICON Emulation Error Error Code= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 193
Control Unit. Recommended This is an unexpected event, please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1059 Message , [FICN-1059], ,, ERROR, , Error return from frame generation for a FICON Image: Path= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 194
IO errors at the same time as this event, please contact your vendor's Action customer support for assistance. Severity INFO FICN-1065 Message Probable Cause , [FICN-1065], ,, INFO, , Egress Abort:Oxid=0x:Unknown Path on - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 195
in use Action or there is an internal memory leak, please contact your vendor's customer support for assistance. Severity WARNING FICN-1067 Message , [FICN-1067], ,, ERROR, , Ingress Abort:Oxid=0x:Abort for CH=0x - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 196
are associated Action IO error messages with this event, please contact your vendor's customer support for assistance. Severity INFO FICN-1071 Message , [FICN-1071], ,, INFO, , HostTapeIngr:Tape Loaded on Path=. Probable Cause Tape IOs are - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 197
on the currently loaded tape. Recommended No action is required. Action Severity INFO FICN-1075 Message , [FICN-1075], ,, INFO, , HostTapeIngr:ReadBlkReport:Path=:Emuls=0x - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 198
be unloaded on a device. Recommended No action is required. Action Severity INFO FICN-1078 Message , [FICN-1078], ,, INFO, , DevTapeEgr:ReadBlkReport:Path=:Emuls=0x - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 199
0x treating as system reset event. Probable Cause An LRJ from a FICON channel indicates that the channel please contact your vendor's customer support for Action assistance. Severity WARNING Fabric OS Message Reference 147 53-1000600 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 200
range is prohibited. Recommended This is an unexpected event, please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1085 Message , [FICN-1085], ,, INFO, , FICON FCIP Tunnel is Up on GE,tunnel Id= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 201
FICN-1086 Message , [FICN-1086], ,, ERROR, , FICON FCIP Tunnel is Down on GE - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 202
22 FICN-1086 150 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 203
system-name>, : config failed rc = . Probable Cause Indicates that one of the configuration management functions failed. The key variable is part of the Fabric OS configuration database and is for support a Fabric OS problem. The domain variable - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 204
displays the PID format currently running on the fabric, and is one of the following: • 0 is VC-encoded PID format Refer to the Fabric OS Administrator's Guide for information on core PID mode and [FICU-1006], ,, WARNING, , Control Device Allegiance Reset (Logical Path: - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 205
low. This might be a transient problem. Recommended Action If the message persists service provider. Severity WARNING FICU-1008 Message , [FICU-1008], ,, WARNING, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 206
23 FICU-1010 FICU-1010 Message , [FICU-1010], ,, WARNING, , FMS Mode enable failed due to address conflict with port . Probable Cause Indicates that the fibre connectivity FICON Management Server mode (fmsMode) - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 207
Messages 24 FKLB-1001 Message , [FKLB-1001], ,, WARNING, , exchange overlapped, pid= Probable Cause Indicates that the FC kernel driver has timed out the exchange while the application is still active. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 208
24 FKLB-1001 156 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 209
Severity WARNING FLOD-1004 Message , [FLOD-1004], , FFDC, ERROR, , Excessive LSU length = Probable Cause Indicates that the LSU size exceeds what the system can support. Recommended Reduce the number of switches in the fabric or reduce the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 210
Message , [FLOD-1005], ,, WARNING, , Invalid received domain ID: Probable Cause -1006 Message , [FLOD-1006], ,, WARNING, , Transmitting invalid domain ID: Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 211
exist on the switch. Recommended No action is required. Action Severity ERROR FSPF-1002 Message , [FSPF-1002], ,, INFO, , Wrong neighbor ID () in Hello message from port , expected ID = Probable Cause Indicates that - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 212
share an identical topology database. The section ID is implemented inside the protocol. The error message itself will indicate the mismatched section ID. It [FSPF-1006], ,, ERROR, , FSPF Version not supported, input port = Probable Cause - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 213
set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FSS-1002 Message , [FSS-1002], ,, WARNING, , Component () sending too many concurrent HA data update transactions - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 214
then run the supportSave command and contact your switch service provider. Severity ERROR FSS-1005 Message , [FSS-1005], ,, WARNING, , FSS read failure Probable Cause Indicates that the read system call to the Fabric OS state synchronization (FSS) device - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 215
your switch service provider. Severity WARNING FSS-1007 Message , [FSS-1007], ,, CRITICAL, , request from the active CP within 5 seconds. This usually indicates a problem with the internal Ethernet connection and a disruption of the synchronization process - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 216
27 FSS-1007 164 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 217
], ,, INFO, , HA State is in sync timestamp>, [FSSM-1003], ,, WARNING, , HA State out of sync. Probable Cause synchronized, run the haDump command to diagnose the problem. If the problem persists, run supportFtp (as needed) to set - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 218
-name>, Incompatible software version in HA synchronization. Probable Cause Indicates that the active control processor (CP) and the standby CP in a dual CP system are running firmware that are incompatible with each other. If the active CP fails, the failover will be disruptive. In a non-bladed - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 219
INFO FW-1002 Message , [FW-1002], ,, WARNING, , , is below low boundary (High=, Low= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 220
FW-1005 Message , [FW-1005], ,, INFO, , , value has changed(High=, Low= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 221
>, [FW-1007], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the speed of the fan has risen above the high boundary. Fan problems typically contribute to temperature - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 222
. Run the psShow command to view the status of the power supply. If the power supply continues to be a problem, replace the faulty power supply. Severity INFO FW-1010 Message , [FW-1010], ,, WARNING, , , is below low boundary(High=, Low - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 223
FW-1012 Message , [FW-1012], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the power supply counter changed from a value outside of the acceptable - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 224
FW-1037 Message , [FW-1037], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has changed. The receive - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 225
1038 FW-1038 Message , [FW-1038], ,, WARNING, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has fallen - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 226
1041 FW-1041 Message , [FW-1041], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has changed. The - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 227
FW-1044 Message , [FW-1044], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 228
above the high boundary, you must replace the SFP. Action Severity WARNING FW-1048 Message , [FW-1048], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 229
If you see frequent voltage fluctuations, replace the SFP. Action Severity WARNING FW-1052 Message , [FW-1052], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 230
and verify that the SFPs and cables are functioning Action properly. Severity INFO FW-1114 Message , [FW-1114], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 231
Message , [FW-1117], ,, INFO, , , value has changed(High=, Low two switches with the same domain ID have connected to one another. • two fabrics have joined. • an E_Port troubleshooting. Severity INFO Fabric OS Message Reference 179 53 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 232
• Two switches with the same domain ID have connected to one another. • Two fabrics have joined. • An E_Port has gone , [FW-1119], ,, INFO, , , is above high boundary(High= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 233
fabric reconfiguration: • Two switches with the same domain ID have connected to one another. • Two fabrics have joined. • An E_Port has gone offline. FW-1121 Message , [FW-1121], ,, INFO, , , value has changed(High=, Low=). - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 234
FW-1124 Message , [FW-1124], ,, INFO, , , is between high and low boundaries(High=, INFO FW-1125 Message , [FW-1125], ,, INFO, , , value has changed(High=, Low=). - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 235
to the particular policy of the Action end-user installation. Severity INFO FW-1127 Message , [FW-1127], ,, INFO, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 236
INFO FW-1129 Message , [FW-1129], ,, INFO, , , value has changed(High=, Low=). INFO FW-1130 Message , [FW-1130], ,, INFO, , , is below low boundary(High=, Low= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 237
FW-1132 Message , [FW-1132], ,, INFO, , , is between high and low boundaries(High=, INFO FW-1133 Message , [FW-1133], ,, INFO, , , value has changed(High=, Low=). - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 238
INFO FW-1135 Message , [FW-1135], ,, INFO, , , is above high boundary(High=, Low= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 239
INFO FW-1138 Message , [FW-1138], ,, INFO, , , is below low boundary(High=, Low= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 240
commonly causes link failures. If you receive concurrent loss of synchronization errors, troubleshoot the loss of synchronization. Severity INFO FW-1161 Message , [FW-1161], ,, INFO, , , , is below low boundary(High=, Low - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 241
commonly cause link failures. If you receive concurrent loss of synchronization errors, troubleshoot the loss of synchronization. Severity WARNING FW-1163 Message , [FW-1163], ,, INFO, , , , is between high and low boundaries(High= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 242
faulty. If you continue to experience loss-of-synchronization errors, troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity WARNING FW-1167 Message , [FW-1167], ,, INFO, , , , is between high and low - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 243
port experiences has changed. Loss of signal generally indicates a physical problem. Recommended Check both ends of your cable connection. Verify that FW-1170 Message , [FW-1170], ,, WARNING, , , , is above high boundary(High= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 244
. Persistent protocol errors occur due to hardware problems. Recommended Check both ends of your cable connection. Verify that the cable and small form-factor pluggables Action (SFPs) are not faulty. Severity INFO FW-1173 Message , [FW-1173], ,, INFO, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 245
. Persistent protocol errors occur due to hardware problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1176 Message , [FW-1176], ,, INFO, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 246
risen above the high boundary. Invalid words usually indicate a hardware problem with an small form-factor pluggable (SFP) or cable. Recommended WARNING FW-1179 Message , [FW-1179], ,, INFO, , , , is between high and low boundaries(High - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 247
of invalid CRCs means that the switch is functioning normally. Severity INFO FW-1182 Message , [FW-1182], ,, WARNING, , , , is above high boundary(High=, Low=). Current value is . Probable Cause - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 248
for faulty hardware. Verify that all optical hardware is clean. Severity INFO FW-1184 Message , [FW-1184], ,, INFO, , , , value has changed(High=, Low=). Current value is . Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 249
is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1187 Message , [FW-1187], ,, INFO, , , , is between high and low boundaries(High=, Low=). Current value is - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 250
is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1191 Message , [FW-1191], ,, INFO, , , , is between high and low boundaries(High=, Low=). Current value is - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 251
that the port experiences has changed. The state of the port has changed for one of the following reasons: the port has gone offline, has come online, is FW-1194 Message , [FW-1194], ,, WARNING, , , , is above high boundary(High= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 252
a value within the acceptable range. The state of the port has changed for one of the following reasons: the port has gone offline, has come online, is indicate a problem in this area. Severity INFO FW-1217 Message Probable Cause , [FW-1217], ,, INFO, , < - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 253
FW-1219 Message , [FW-1219], ,, INFO, , , is between high and low boundaries(High=, - or six-digit figures, as only large numbers of messages indicate a problem in this area. Recommended No action is required. Respond to this message - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 254
INFO FW-1241 Message , [FW-1241], ,, INFO, , , is below low boundary(High=, Low=). FW-1242 Message , [FW-1242], ,, WARNING, , , is above high boundary(High=, Low=< - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 255
INFO FW-1244 Message , [FW-1244], ,, INFO, , , value has changed(High=, Low=). INFO FW-1245 Message , [FW-1245], ,, INFO, , , is below low boundary(High=, Low= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 256
FW-1247 Message , [FW-1247], ,, INFO, , , is between high and low boundaries(High=, INFO FW-1248 Message , [FW-1248], ,, INFO, , , value has changed(High=, Low=). - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 257
to the particular policy of the Action end-user installation. Severity INFO FW-1250 Message , [FW-1250], ,, INFO, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 258
that the number of frame types or commands that the port receives has fallen below the low boundary. The port has received a small computer system interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame. Recommended No action is required. Respond to this - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 259
to a value within the acceptable range. The port has received a small computer system interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP address. The TELNET_POLICY contains a list of internet protocol (IP) addresses that are authorized to establish telnet connections - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 260
unauthorized IP address. The TELNET_POLICY contains a list of internet protocol (IP) addresses that are authorized to establish telnet connections INFO FW-1300 Message , [FW-1300], ,, INFO, , , value has changed(High=, Low=). - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 261
Message , [FW-1301], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of hypertext transfer protocol (HTTP) violations has fallen below the low boundary - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 262
) contains a list of internet protocol (IP) addresses that are authorized to establish API connections to switches in the fabric. Recommended No action is required. Action Severity INFO FW-1306 Message , [FW-1306], ,, WARNING, , , is above - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 263
, [FW-1308], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of simple network management protocol read (RSNMP) violations has changed. RSNMP violations - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 264
, [FW-1310], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of simple network management protocol read (RSNMP) violations has risen above the high - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 265
, [FW-1313], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of simple network management protocol write (WSNMP) violations has fallen below the low - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 266
Cause Indicates that the number of SES violations has fallen below the low boundary. SES violations indicate that an small computer system interface (SCSI) Enclosure Services (SES) request has been received from an unauthorized world-wide name (WWN). The SES_POLICY contains a list of WWNs of device - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 267
from a value outside of the acceptable range to a value within the acceptable range. SES violations indicate that an small computer system interface (SCSI) Enclosure Services (SES) request has been received from an unauthorized world-wide name (WWN). The SES_POLICY contains a list of WWNs of device - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 268
Consult your security administrator for response strategies and policies. Severity WARNING FW-1323 Message , [FW-1323], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 269
Consult your security administrator for response strategies and policies. Severity WARNING FW-1327 Message , [FW-1327], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 270
Consult your security administrator for response strategies and policies. Severity INFO FW-1329 Message , [FW-1329], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 271
panel access is enabled. Recommended No action is required. Action Severity INFO FW-1332 Message , [FW-1332], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 272
be members of a fabric. Recommended No action is required. Action Severity INFO FW-1336 Message , [FW-1336], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 273
the name server. Recommended No action is required. Action Severity INFO FW-1338 Message , [FW-1338], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 274
through the name server. Recommended No action is required. Action Severity INFO FW-1340 Message , [FW-1340], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 275
Consult your security administrator for response strategies and policies. Severity WARNING FW-1343 Message , [FW-1343], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 276
due to invalid timestamps. Recommended No action is required. Action Severity INFO FW-1346 Message , [FW-1346], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 277
to invalid timestamps. Recommended No action is required. Action Severity INFO FW-1348 Message , [FW-1348], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 278
with invalid signatures. Recommended No action is required. Action Severity INFO FW-1350 Message , [FW-1350], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 279
with invalid signatures. Recommended No action is required. Action Severity INFO FW-1352 Message , [FW-1352], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 280
with invalid certificates. Recommended No action is required. Action Severity INFO FW-1354 Message , [FW-1354], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 281
FW-1357 Message , [FW-1357], ,, INFO, , , is below low boundary(High=, Low= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 282
for many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected FW-1359 Message , [FW-1359], ,, INFO, , , is between high and low boundaries(High=, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 283
Message , [FW-1361], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of switch link authentication protocol (SLAP) faulty packets has fallen below the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 284
INFO FW-1365 Message , [FW-1365], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of time service (TS) out-of-sync violations has fallen below the low - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 285
FW-1367 Message , [FW-1367], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of time service (TS) out-of-sync violations has changed from - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 286
FW-1371 Message , [FW-1371], ,, INFO, , , is between high and low boundaries(High= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 287
administrator Action for response strategies and policies. Severity WARNING FW-1375 Message Probable Cause , [FW-1375], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Indicates - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 288
on the primary FCS switch as well as one security command that can be executed only on a backup FCS switch. The INFO FW-1378 Message , [FW-1378], ,, WARNING, , , is above high boundary(High=, Low=). - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 289
switch. The counter increments every time someone issues one of these commands on a switch where it , [FW-1400], ,, INFO, , , value has changed(High=, permanent increases can lead to future problems. Recommended No action is required. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 290
operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as INFO FW-1402 Message , [FW-1402], ,, WARNING, , , is above high boundary(High=, Low= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 291
of the Action end-user installation. Severity INFO FW-1426 Message , [FW-1426], ,, WARNING, , Switch status change contributing factor Power supply: bad, absent. Probable Cause Indicates that the switch status is not in - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 292
slots for redundancy. Recommended Rearrange the power supplies so that one is in an odd slot and other in an even slot to make them Action redundant. Severity WARNING FW-1430 Message , [FW-1430], ,, WARNING, , Switch status change contributing factor - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 293
Message , [FW-1432], ,, WARNING, , Switch status change contributing factor WWN: bad heartbeat was up on a power cycle, and the CPs came up non-redundant, then you should reboot the CPs again to clear the problem. Severity WARNING Fabric OS - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 294
1436 Message , [FW-1436], ,, WARNING, , Switch status change contributing factor Marginal ports: - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 295
policy or to add SFPs to the empty Action ports. Severity WARNING FW-1439 Message , [FW-1439], ,, WARNING, , Switch status change contributing factor Switch offline. Probable Cause Indicates that the switch status is not in a healthy state. This occurred - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 296
INFO FW-1441 Message , [FW-1441], ,, INFO, , state has changed to . Probable Cause changed to "inserted". This means that an FRU is inserted but not powered on. Recommended No action is required. Verify that the event was planned. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 297
], ,, INFO, , Four power supplies are now required for 2X than one power supply may be required to provide adequate power. So (even if the AP blade is powered down are: 2 out of service indicates switch status is DOWN, 1 out of service indicates switch status is MARGINAL - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 298
the mail alert using the fwMailCfg command. Action Severity WARNING FW-1501 Message , [FW-1501], ,, INFO, , Mail overflow cleared - alerts discarded. Probable Cause Indicates that the mail overflow condition has cleared. Recommended No - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 299
Reboot the standby CP blade by ejecting the card and reseating it. If the problem persists, replace the standby CP. Severity CRITICAL HAM-1002 Message , [HAM-1002], ,, INFO, , Standby CP is healthy. Probable Cause Indicates that all of the standby - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 300
it is down. Recommended No action is required. Action Severity INFO HAM-1006 Message Probable Cause , [HAM-1006], ,, CRITICAL, ,EMAC controller for Active CP is BAD. Indicates that the local EMAC controller on the active control processor (CP) is BAD as - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 301
30 HAM-1006 Recommended The standby CP will take over and reset the active CP.The system will be non-redundant as the Action standby becomes the active CP. Severity CRITICAL Fabric OS Message Reference 249 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 302
30 HAM-1006 250 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 303
up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL HAMK-1002 Message , [HAMK-1002], ,, INFO, , Heartbeat down. Probable Cause Indicates that the active control processor (CP) blade - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 304
31 HAMK-1004 HAMK-1004 Message ,[HAMK-1004], ,, INFO, , Resetting standby CP (double reset may occur). Probable Cause Indicates that the standby control processor (CP) is being reset due to a loss of heartbeat. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 305
>, [HIL-1103], ,, ERROR, , Blower faulted, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 306
problem persists, replace the fan FRU or the power supply FRU as necessary. Severity ERROR HIL-1105 Message , [HIL-1105], ,, ERROR, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 307
], ,, ERROR, , Switch faulted, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 308
Message , [HIL-1202], ,, ERROR, , Blower faulted, speed ( RPM is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Run the fanShow command - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 309
system-name>, Fan sensor , speed ( RPM) below threshold. Probable Cause Indicates that the specified fan speed (in RPM) has fallen below the minimum threshold. This problem . Refer to the hardware reference manual for your switch for the operational - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 310
This message is often preceded by a low speed error message. This problem can cause the switch to overheat. Recommended Replace the affected fan FRU immediately , [HIL-1303], ,, ERROR, , One fan failed. Replace failed fan FRU immediately. Probable Cause - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 311
Message , [HIL-1305], ,, ERROR, , One or two fan(s) failed. Replace failed fan FRUs immediately. Message Probable Cause , [HIL-1308], ,, ERROR, , All fans failed. Replace failed fan FRUs immediately. Indicates that - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 312
and non-faulty behavior. Replace the switch because the fan is not field-replaceable. Severity INFO HIL-1401 Message , [HIL-1401], ,, WARNING, , One fan FRU missing. Install fan FRU immediately. 260 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 313
Action Severity WARNING HIL-1404 Message , [HIL-1404], ,, WARNING, , fan FRUs missing. Install fan FRUs immediately. Probable Cause Indicates that one or more fan field-replaceable units (FRUs) have been removed. Recommended Install the missing - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 314
Message , [HIL-1503], , FFDC, CRITICAL, , Slot , unit shutting down. Probable Cause Indicates within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. If the message - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 315
within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Severity CRITICAL HIL to avoid causing damage to the switch, the system shuts down automatically. To help prevent future problems, make sure that all the fans are - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 316
the system can continue operation. Recommended Action To help prevent future problems, make sure that all the fans are working properly. Make sure that the area is well ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 317
is too high, monitor the switch. Try rebooting or power cycling the switch. Severity CRITICAL HIL-1603 Message , [HIL-1603], , FFDC, CRITICAL, , fans out of service. System is shutting down immediately. Probable Cause Indicates that total - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 318
32 HIL-1650 Severity ERROR 266 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 319
[HLO-1001], , FFDC, ERROR, , Incompatible Inactivity timeout from port , correct value . Probable Cause Indicates that the HLO message was incompatible with the value specified in the FSPF protocol. The Brocade switch will not accept - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 320
from another manufacturer. Recommended The HLO message of the remote switch must be compatible with the value specified in the FSPF Action protocol. Refer to documentation of the other manufacturer's switch to change this value. Severity ERROR Severity ERROR 268 Fabric OS Message Reference 53 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 321
Message , [HMON-1001], , FFDC, CRITICAL, , Probable Cause Indicates that there was a problem reading an essential file containing configuration information from the nonvolatile storage device. This could be the result of a missing - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 322
34 HMON-1001 270 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 323
required. For more information on PID, format refer to the Fabric OS Administrator's Action Guide. Severity INFO HTTP-1002 Message , [HTTP-1002], , AUDIT, INFO, , Zoning transaction initiated by User: , Role: completed successfully - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 324
35 HTTP-1003 272 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 325
,, ERROR, , Slot , Port GE: Maximum attempts to restart failed. Disabling port. Probable Cause Indicates that the specified port has crashed unexpectedly and restarting attempts have failed. Recommended Power off and power on the blade using - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 326
36 IBD-1001 274 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 327
. Recommended Change the initiator name, keeping the number of characters within the supported limit. Action Severity WARNING IBPD-1002 Message , [IBPD-1002], ,, WARNING, , : target name length exceeds the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 328
37 IBPD-1003 276 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 329
Action Check memory usage on the switch using the memShow command. Reboot or power cycle the switch. Severity ERROR ICPD-1002 Message , [ICPD-1002], ,, ERROR, , Failed to initialize rc = . Probable Cause Indicates that an initialization - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 330
this command. Severity WARNING ICPD-1006 Message , [ICPD-1006], ,, INFO, , iSCSI service is on the switch. Probable Cause Indicates that the iSCSI service is enabled or disabled on the switch. Recommended No action is required. Action Severity - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 331
38 ICPD-1008 ICPD-1008 Message , [ICPD-1008], ,, INFO, , iSCSI switch () is . Probable Cause Indicates that the iSCSI switch is reachable or unreachable. Recommended No action is required. Action Severity - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 332
38 ICPD-1008 280 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 333
Chapter IPAD System Messages 39 IPAD-1000 Message , [IPAD-1000], ,, INFO, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 334
39 IPAD-1001 282 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 335
that memory resources are low. This might be a transient problem. Recommended Action If the message persists, check the memory usage and contact your switch service provider. Severity WARNING IPS-1004 Message , [IPS-1004], ,, WARNING, , Port Config - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 336
-1005 Message , [IPS-1005], ,, WARNING, , Tunnel Authorization Failure for slot () port(ge) SACK, FastWrite, and TapePipelining setting. Recommended Change the tunnel configuration on one side of the tunnel to match that of the other side to - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 337
Chapter ISCS System Messages 41 ISCS-1000 Message , [ISCS-1000], ,, ERROR, , Slot Port GE crashed unexpectedly. Probable Cause Indicates that specified port has crashed. Recommended No action is required; the port - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 338
41 ISCS-1000 286 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 339
Severity INFO ISNS-1003 Message , [ISNS-1003], ,, INFO, , Peering with external iSNS server is disabled. Probable Cause Indicates that the IP address of internet storage name service (iSNS) server is set to zero, so peering is disabled. Recommended If - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 340
has requested a re-register with the specified external internet storage name service (iSNS) server. Recommended No action is required. Action Severity INFO ISNS-1006 Message , [ISNS-1006], ,, INFO, , Start re-register with external iSNS server - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 341
manual for valid slot and Action port ranges. Severity WARNING ISNS-1011 Message Probable Cause Recommended Action , [ISNS-1011], ,, INFO, , iSNS Client Service is . Indicates the current state of the internet storage - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 342
1013 Severity INFO ISNS-1013 Message , [ISNS-1013], ,, WARNING, , iSNS server connection failure. Probable Cause Indicates that the internet storage name service (iSNS) client failed to establish a connection with the iSNS server. Recommended Verify the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 343
Action Severity INFO FCR-1003 Message , [FCR-1003], ,, INFO, ,FC router physical devices newly exported at port . Probable Cause Indicates that one or more physical devices have been newly exported through the specified port. Recommended No - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 344
-number>,, INFO, , FC router physical devices offline at port . Probable Cause Indicates that one or more physical devices -number>,, INFO, , FC router LSAN zone deleted at port . Probable Cause Indicates that a logical storage area network (LSAN) - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 345
43 FCR-1008 Severity INFO FCR-1008 Message , [FCR-1008], ,, INFO, , FC router LSAN zone created at port . Probable Cause Indicates that a logical storage area network (LSAN) zone was created at the specified port in the edge fabric. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 346
. Action Severity INFO FCR-1012 Message , [FCR-1012], ,, INFO, , FC Router fabric build completed on port . Probable Cause Indicates that the fibre channel router has completed a fabric build at the specified port. Recommended No action is - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 347
many proxy devices are created in the fabric with the port resource problem. LSAN zones are removed using standard zoning commands such as zoneShow, , , Local LSAN zone entries for FC router exhausted; max limit: . Indicates that the number of logical storage area - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 348
the LSAN zone entries on the edge fabrics. 4. Run portEnable on each EX_Port, one at a time, to reenable the EX_Ports, and verify that this error is not , , Local LSAN device entries exhausted. Probable Cause Indicates that the number of devices created through logical storage area - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 349
the number of translate domain ports required) by limiting the devices specified in logical storage area network (LSAN) zones. Severity WARNING FCR-1024 Message , [FCR-1024], ,, WARNING, , Local LSAN zone device entries for edge LSAN exhausted - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 350
deployed in a very large MetaSAN environment with large number of logical storage area network (LSAN) devices and fabrics, or there are highly INFO FCR-1028 Message , [FCR-1028], ,, INFO, , In slot node WWN pool 95 percent allocated. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 351
the edge fabric. Recommended No action is required. Action Severity INFO FCR-1033 Message Probable Cause , [FCR-1033], ,, INFO, , Edge fabric disabled security on port in fabric . Indicates that Secure mode was turned off in the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 352
action is required. Action Severity INFO FCR-1034 Message , [FCR-1034], ,, INFO, , LSAN zone added in backbone fabric. Probable Cause Indicates that a new logical storage area network (LSAN) zone was added to the backbone fabric. Recommended No action is - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 353
FCR-1039 Message , [FCR-1039], ,, INFO, , Local LSAN zone device entries for backbone LSAN Probable Cause Indicates that the number of devices in the specified logical storage area network (LSAN) defined in the backbone fabric is greater than - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 354
, LSAN zone removed in the backbone fabric. Probable Cause Indicates that a logical storage area timestamp>, [FCR-1048], ,, ERROR, , On EX port () setting Execute the portEnable command. If the problem persists try rebooting the switch. If - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 355
Cause Indicates an incoming exchange link protocol (ELP) command was issued and it is not supported. Recommended Action Run the portEnable and portDisable commands to enable and disable the port. If the problem persists contact your switch service provider. Severity ERROR FCR-1053 Message - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 356
if backbone to edge routing is not required. Otherwise replace the switch with Action one that supports backbone to edge routing. Severity INFO FCR-1056 Message , [FCR-1056], ,, INFO, , Switch with front domain ID does not - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 357
-ready flow control mode. This is the Fibre Channel standard protocol, that uses R_RDY primitive for flow control. Severity WARNING FCR-1061 Message Probable Cause , [FCR-1061], ,, INFO, , Backbone fabric created on port . Indicates that - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 358
system-name>, Port disabled, system only supports EX/VEX_ports. Probable Cause Indicates that the maximum number of supported [FCR-1064], ,, ERROR, , Fabric ID of backbone FC-Routers mismatch or overlap. Probable Cause Indicates that - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 359
split, then merge the fabrics and manually re-enable the port. If there the maximum number supported by the Fibre limit. Recommended Limit the logical storage area network (LSAN) zoning related system-name>, The FC Routing service is disabled. Probable Cause Indicates that the FC Routing service - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 360
sequence-number>,, INFO, , The FC Routing service is enabled. Probable Cause Indicates that the FC Routing service is enabled. This is 1072 Message Probable Cause , [FCR-1072], ,, INFO, , Port is changed from FCR port to non FCR - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 361
created in the connected fabric exceeds the maximum supported by the FC Router. This size is equal to the total number of characters used by all the zone names in the edge fabric zoning database. The limit includes both logical storage area network (LSAN) and Non-LSAN zone names defined in zoning - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 362
-1076 FCR-1076 Message , [FCR-1076], ,, ERROR, , Port disabled, system only supports front domains. Probable Cause Indicates that the maximum number of supported front domains was exceeded. To enable the specified port, disable - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 363
state within the system. A critical application error was reported in the watchdog subsystem. Refer to the string at the end of the error message for specific information. The switch will reboot (on single-CP switches) or failover (on dual-CP switches). The warning message will be any one of the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 364
44 KSWD-1003 312 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 365
45 KTRC-1001 Message , [KTRC-1001], ,, WARNING, , Dump memory size exceeds dump file size Probable Cause Indicates that the dump memory size has exceeded the dump file size. Recommended No action is required. Action Severity WARNING KTRC-1002 Message - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 366
-1005 Recommended No action is required. Action Severity ERROR KTRC-1005 Message , [KTRC-1005], ,, ERROR, , Trace initialization failed. . . Probable Cause Indicates that Trace was unable to initialize - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 367
your switch service provider. Severity WARNING LOG-1002 Message , [LOG-1002], , FFDC, WARNING, , A the error logging system. A trace dump file is created. The message might still be visible through SNMP or other management tools. Recommended Action - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 368
46 LOG-1003 LOG-1003 Message , [LOG-1003], ,, INFO, , The log has been cleared. Probable Cause Indicates that the persistent error log has been cleared. Recommended No action is required. Action Severity INFO - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 369
through 239. The switch will discard the record because it is not supported. Recommended No action is required. Action Severity ERROR LSDB-1002 Message , [LSDB-1002], ,, INFO, , Local Link State Record reached max incarnation# Probable Cause Indicates - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 370
link state record is generated Action during the switch enable. Severity CRITICAL LSDB-1004 Message , [LSDB-1004], ,, WARNING, , No Link State Record for domain Probable Cause Indicates that there is no link state record for the specified - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 371
) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR MFIC-1002 Message , [MFIC-1002], ,, INFO, , Chassis FRU header not programmed for switch NID, using defaults (applies only to - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 372
WARNING, , Effective Insistent domain ID for the fabric changed from to Probable Cause Indicates that one or more be set using the configure command in the CLI or checking the Advanced Web Tools Switch Admin > Configure Tab > Fabric Subtab > Insistent Domain ID Mode - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 373
root of the tree. Recommended No action is required. Action Severity ERROR MPTH-1002 Message , [MPTH-1002], , FFDC, ERROR, , Null lsrP, lsId = Probable Cause Indicates that a link state record is null. Recommended No action is required - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 374
49 MPTH-1003 322 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 375
Messages 50 MQ-1004 Message , [MQ-1004], ,, ERROR, , mqRead, queue = , queue ID = , type = Probable Cause Indicates that an unexpected message has been received in the specified - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 376
50 MQ-1004 324 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 377
power cycle the switch. Action Severity WARNING MS-1002 Message , [MS-1002], ,, INFO, , MS Platform Service Unstable() Probable Cause The management server (MS) platform service is unstable. The message string can be one - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 378
command to upgrade the firmware level on the switch to a level that supports RCS. RCS is supported in Fabric OS v2.6, v3.1 and greater, and v4.1 and greater. your switch service provider. Severity INFO MS-1004 Message , [MS-1004], ,, INFO, , - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 379
MS) received information unit (IU) data of unexpected size. The IU payload and the IU size might be inconsistent with each other or with the and contact your switch service provider. Severity ERROR MS-1008 Message , [MS-1008], ,, ERROR, , MS Failure while - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 380
Recommended Action Persistent RLIR incidents are likely due to SAN hardware problems such as bad cables, small form-factor pluggables (SFPs), etc INFO, , Management Server Platform Service Probable Cause Indicates that Management Server Platform Service is - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 381
MS-1023 MS-1023 Message , [MS-1023], ,, INFO, , Management Server Topology Discovery Service Probable Cause Indicates that Management Server Topology Discovery Service is being enabled or disabled. Recommended No action is required - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 382
51 MS-1024 330 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 383
Message , [NBFS-1002], , FFDC, ERROR, , Wrong input: to neighbor FSM, state < this error occurs repeatedly, it means the protocol implementation between two connected switches has problems. Recommended Action Run the nbrStateShow command to - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 384
, [NBFS-1003], ,, WARNING, , DB_XMIT_SET flag not set in state - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 385
NS-1001 Message , [NS-1001], ,, WARNING, , The response for request 0x from remote switch 0x is larger than the max frame size the remote switch can support! Probable Cause Indicates that the response payload exceeds the maximum - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 386
version of firmware. Severity INFO NS-1005 Message , [NS-1005], ,, WARNING, , Zone size of has over the supporting limit of for the remote switch domain ID . Probable Cause Indicates that - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 387
set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1002 Message , [PDM-1002], ,, WARNING, , ipcInit failed. Probable Cause Indicates that the parity data manager (PDM) process - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 388
Reboot or power cycle the switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1005 Message , [PDM-1005], ,, WARNING, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 389
to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1008 Message , [PDM-1008], ,, WARNING, , Failed to get the number of U_Ports. Probable Cause Indicates that the parity data - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 390
set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1012 Message , [PDM-1012], ,, WARNING, , File write failed: Probable Cause Indicates that the parity data manager - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 391
transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL PDM-1019 Message , [PDM-1019], ,, WARNING, , File path or trigger too long. Probable Cause Indicates that one line of the pdm.conf file is too long - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 392
[PDM-1021], ,, WARNING, , DNS is configured for IPv6. Probable Cause Indicates that the parity data manager (PDM) cannot sync with its peer because the domain name service (DNS) is configured for IPv6. IPv6 is not supported by older firmware. Recommended Action Run - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 393
54 PDM-1024 Fabric OS Message Reference 341 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 394
54 PDM-1024 342 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 395
to view the panic dump and core dump files. Action Severity INFO PDTR-1002 Message , [PDTR-1002], ,, INFO, , < informational message > Probable Cause This message indicates that information has been written to the panic dump and core dump files and - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 396
55 PDTR-1002 344 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 397
command and contact your switch service provider. Severity CRITICAL PLAT-1001 Message , [PLAT-1001], ,, INFO, , CP - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 398
56 PLAT-1002 Severity CRITICAL 346 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 399
-number>,, WARNING, , Port Faulted because of many Link Failures Probable Cause Indicates that the specified port is now disabled because the link on this port had multiple failures that exceed an internally set threshold on the port. This problem is typically related to - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 400
57 PORT-1005 PORT-1005 Message , [PORT-1005], ,, WARNING, , Slot port does not support configured L_port. Issue portCfgLport to clear configuration. Probable Cause Indicates that the specified port is configured to be an - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 401
reboot (or fail over) automatically. If it does not, reboot or power cycle the switch to Action reinitiate the firmware. Severity CRITICAL PS-1001 Message , [PS-1001], ,, INFO, , Advanced Performance Monitoring configuration updated due to change in PID - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 402
WARNING, , Failed to add end-to-end monitors on port which is an ISL port. Probable Cause Indicates that the restoring configuration has attempted to add end-to-end monitors on at least one ISL port. Recommended No action is required. End-to-end monitoring is not supported on - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 403
has been issued. Recommended No action is required. Action Severity INFO PSWP-1002 Message , [PSWP-1002], ,, INFO, , Port Swap feature enabled. Probable Cause Indicates that the portSwap feature has been enabled in the switch. Recommended No action is - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 404
59 PSWP-1003 352 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 405
the supportSave command Action and contact your switch service provider. Severity INFO RAS-1002 Message , [RAS-1002], ,, WARNING, , First failure data capture (FFDC) maximum storage size ( MB) was reached. Probable Cause Indicates that - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 406
internal software error. Recommended Run the supportSave command and contact your switch service provider. Action Severity WARNING RAS-1006 Message , [RAS-1006], , INFO, , Support data file () automatically transferred to remote address - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 407
is required. Action Severity INFO RAS-3001 Message , [RAS-3001], , INFO, , USB storage device plug-in detected. Probable Cause Indicates that the USB storage device plug-in is being detected. Recommended No action is required. Action Severity INFO RAS - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 408
60 RAS-3004 Recommended No action is required. Action Severity INFO 356 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 409
for any switches that do not support RCS. Severity INFO RCS-1002 Message , [RCS-1002], ,, INFO, , RCS has been enabled. switch using the memShow command. Reboot or power cycle the switch. Severity ERROR Fabric OS Message Reference 357 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 410
greater. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity ERROR RCS-1005 Message , [RCS-1005], ,, INFO, , Phase , Application returned , 0x - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 411
1007 Message , [RCS-1007], ,, ERROR, , Zone DB size and propogation overhead exceeds domain 's maximum supported Zone DB size . Retry after reducing the Zone DB size. Probable Cause Indicates that a domain cannot handle the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 412
61 RCS-1008 360 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 413
the SSL certificate file configured on the switch could not be accessed because root did not have read-level access. Recommended Change the file system access level for the certificate file to have root read-level access. Action Severity WARNING Fabric OS Message Reference 361 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 414
the private key file configured on the switch could not be accessed because root did not have read-level access. Recommended Change the file system access level for the private key file and make sure that root has read-level Action access. Severity WARNING RPCD-1007 Message , [RPCD - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 415
ERROR RTWR-1002 Message , [RTWR-1002], ,, WARNING, , RTWR 0x, 0x, 0x, 0x< run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 363 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 416
1003 RTWR-1003 Message , [RTWR-1003], ,, INFO, , : RTWR retry to domain < ; then run the supportSave command and contact your switch service provider. Severity INFO 364 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 417
64 SAS-1001 Message , [SAS-1001], ,, ERROR, , string description of command which failed> of GE failed. Please retry the command. Data inst= st= - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 418
64 SAS-1001 366 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 419
SCN queue for the specified daemon name is full. This might be caused by the daemon hanging or if the system is busy. The valid values for daemon name can be: • fabricd • asd • evmd • fcpd • and contact your switch service provider. Severity CRITICAL Fabric OS Message Reference 367 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 420
65 SCN-1001 368 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 421
Message , [SEC-1001], ,, ERROR, , RCS process fails: Probable Cause Indicates that the reliable commit service (RCS) process fails to complete. RCS is a mechanism for transferring data from one switch to other switches within the fabric. RCS - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 422
contact your switch service provider. Severity WARNING SEC-1005 Message , [SEC-1005], ,, INFO, , Primary to check whether any of the switches in the fabric encountered an error. If one or more switches is not in Ready state, and you have reason to believe - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 423
access to the switch through the HTTP connection. Action Severity INFO SEC-1009 Message , [SEC-1009], ,, INFO, , Security violation: Unauthorized host with IP address tries to establish TELNET connection. Probable Cause - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 424
re-creating PKI objects, outlined in the Secure Fabric OS Administrator's Guide. If a certificate does not exist or is invalid, install the number>,, INFO, , The security database is too large to fit in flash. Probable Cause Indicates that the size of the security database - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 425
might not be correctly updated for that specific switch. Severity ERROR SEC-1028 Message , [SEC-1028], ,, ERROR, , No name is specified. Probable Cause Indicates that a corruption occurred during the distribution of the security database. This can occur - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 426
Message , [SEC-1031], ,, WARNING, , Current security policy DB cannot be supported by standby. CPs will go out of sync. Probable Cause Indicates that the security database size is not supported by the standby control processor (CP). Recommended Reduce the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 427
, [SEC-1033], ,, ERROR, , Invalid character used in member parameter to add switch as a member parameter in the secPolicyAdd command. Only the secPolicyCreate command supports use of the asterisk for adding switches to policies. Recommended Action Run - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 428
. Action Severity ERROR SEC-1036 Message , [SEC-1036], ,, ERROR, , Device name is invalid due to a missing colon. Probable Cause Indicates that one or more device names mentioned in the securePolicyCreate or securePolicyAdd command does not - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 429
number. • The value is too long. Valid numbers must be between one and three characters long. • The value cannot be parsed due to invalid ERROR SEC-1042 Message , [SEC-1042], ,, ERROR, , Invalid index/area member in portlist (). - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 430
. Recommended Use valid syntax when entering port ranges. Action Severity ERROR SEC-1044 Message , [SEC-1044], ,, ERROR, , Duplicate member in (). Probable Cause Indicates that the specified member is a duplicate in the input list. The - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 431
be correctly updated for that specific switch. Severity ERROR SEC-1050 Message , [SEC-1050], ,, ERROR, , There are more than one switches with the same name in the fabric. Probable Cause Indicates that there has been a corruption during - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 432
might not be correctly updated for that specific switch. Severity ERROR SEC-1053 Message , [SEC-1053], ,, ERROR, , Invalid pFCS list Probable Cause Indicates that there has been a corruption during the distribution of the security database - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 433
database might not be correctly updated for that specific switch. Severity ERROR SEC-1056 Message , [SEC-1056], ,, ERROR, , Invalid position . Only members in list. Probable Cause Indicates that there has - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 434
1057], ,, ERROR, , No change. Both positions , [SEC-1059], ,, ERROR, , Fail to - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 435
ERROR SEC-1064 Message , [SEC-1064], ,, ERROR, , Failed to sign message. Probable Cause Indicates that the public key infrastructure command Action and contact your switch service provider. Severity ERROR Fabric OS Message Reference 383 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 436
set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1073 Message , [SEC-1073], ,, ERROR, , No FCS policy in list! Probable Cause Indicates that the specific policy type is - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 437
privilege, that is, either a backup FCS or primary FCS. Severity ERROR SEC-1075 Message , [SEC-1075], ,, ERROR, , Fail to new policy set on all switches. Probable Cause Indicates that there has been a corruption during the distribution of - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 438
the ready state. Action Retry the command when all switches are ready. Severity ERROR SEC-1078 Message , [SEC-1078], ,, ERROR, , No new data to abort. Probable Cause Indicates that there are no new changes in the defined security policy database that can - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 439
alpha-numeric string, and run the Action secPolicyCreate command again. Severity ERROR SEC-1082 Message , [SEC-1082], ,, ERROR, , Failed to create policy. Probable Cause Indicates that the security policy was not created due to faulty input - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 440
might not be correctly updated for that specific switch. Severity ERROR SEC-1084 Message , [SEC-1084], ,, ERROR, , Name exists for different type . Probable Cause Indicates that the specified policy already exists. Recommended No action is - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 441
. Recommended Reduce the number of entries in some policies to decrease the security database size. Action Severity ERROR SEC-1087 Message , [SEC-1087], ,, ERROR, , The security database is larger than the data distribution limit of fabric - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 442
, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1091 Message , [SEC-1091], ,, ERROR, , No policy to remove. Probable Cause Indicates that the specified policy member does not exist or the policy itself does not - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 443
be correctly updated for that specific switch. Severity ERROR SEC-1093 Message , [SEC-1093], ,, ERROR, , New FCS list must have at least one member in common with current FCS list. Probable Cause Indicates that the new fabric configurations server (FCS - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 444
ERROR SEC-1097 Message , [SEC-1097], ,, ERROR, , Cannot find policy set. Probable Cause Indicates that supportSave command and contact your switch service provider. Severity ERROR 392 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 445
up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1099 Message , [SEC-1099], ,, ERROR, , Please enable your switch before running secModeEnable. Probable Cause Indicates that - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 446
ERROR, , Failed to enable security on all switches. Please retry later. Probable Cause Indicates that the security enable failed on the fabric because one or more specified in the Secure Fabric OS Administrator's Guide. Severity ERROR 394 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 447
follow the steps for re-creating PKI objects outlined in the Secure Fabric OS Administrator's Guide. Severity ERROR SEC-1107 Message , [SEC-1107], ,, INFO, , Stamp is 0. Probable Cause Indicates that there has been a corruption during the distribution of - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 448
in the defined security Action database. Severity ERROR SEC-1111 Message , [SEC-1111], ,, ERROR, , New defined FCS list must have at least one member in common with current active FCS list. Fail to download defined database. Probable Cause Indicates that - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 449
same as the current FCS policy on the switch. Action Severity ERROR SEC-1115 Message , [SEC-1115], ,, ERROR, , No primary FCS to failover. Probable Cause Indicates that during an attempted secFcsFailover, no primary fabric configurations server (FCS) is - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 450
Indicates that the SNMP string could not be set. Recommended Usually this problem is transient. Retry the command. Action Severity INFO SEC-1119 Message , [SEC-1119], ,, INFO, , Secure mode has been enabled. Probable Cause Indicates that the secure - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 451
, retry the operation. Severity ERROR SEC-1122 Message , [SEC-1122], ,, INFO, , Error code: , . Probable Cause Indicates that one of the switches in the fabric could not communicate with the primary fabric configurations server - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 452
Severity INFO SEC-1135 Message , [SEC-1135], ,, INFO, , Secure fabric version stamp has been reset. Probable Cause Indicates that the version as defined by your enterprise security policy. Severity INFO 400 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 453
range as a result of a replay attack or out-of-sync time service, or the signature verification failed. Signature verification failure indicates either an internal -1137 Message , [SEC-1137], ,, ERROR, , No signature in . - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 454
of a replay attack or out-of-sync time service, or the signature verification failed. Signature verification failure SEC-1142], ,, INFO, , Reject new policies. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 455
, , Error in RCA: RCS is not supported Probable Cause Indicates that reliable commit service (RCS) is not supported. Recommended able to change the index/area because the new policy database exceeds the maximum size. This message can also be caused when the switch is short of memory. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 456
Recommended Reduce the size of the specified policy database. Action Severity INFO SEC-1156 Message , [SEC-1156], ,, INFO, , Change command and contact your switch service provider. Severity INFO 404 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 457
database might not be correctly updated for that specific switch. Severity INFO SEC-1160 Message , [SEC-1160], ,, INFO, , Duplicate port in port list (). Probable Cause Indicates that a duplicate port member exists in the specified - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 458
secModeEnable command when switch is already in Action secure mode. Severity ERROR SEC-1164 Message , [SEC-1164], ,, ERROR, , Lockdown option cannot be applied on a non-FCS switch. Probable Cause Indicates that the attempt to enable security is made on - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 459
might not be correctly updated for that specific switch. Severity ERROR SEC-1167 Message , [SEC-1167], ,, ERROR, , Another FCS failover is in process. Command terminated. Probable Cause Indicates that because another failover is already in progress, this - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 460
required license key. Refer to your switch supplier to obtain a license if you do not have one. Severity ERROR SEC-1172 Message , [SEC-1172], ,, ERROR, , Failed to identify role. Probable Cause Indicates that the switch is unable to determine its role - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 461
intentionally, no action is required; if not, check the primary FCS. Action Severity ERROR SEC-1174 Message , [SEC-1174], ,, ERROR, , Failed to set password. Probable Cause Indicates that the FCS or non-FCS password could not be set - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 462
SEC-1181 Message , [SEC-1181], ,, INFO, , Deleted account Probable Cause Indicates that the specified account run the supportSave command and contact your switch service provider. Severity ERROR 410 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 463
Authentication Dial-in User Service (RADIUS) / Lightweight Directory Access Protocol (LDAP) is the primary AAA mechanism Recommended No action is required. Action Severity INFO SEC-1186 Message , [SEC-1186], ,, INFO, , Configuration - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 464
appropriate action, as defined by your enterprise security policy. Severity INFO SEC-1189 Message , [SEC-1189], ,, INFO, , Security violation: Unauthorized host with IP address tries to do SNMP write operation. Probable Cause Indicates that - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 465
action, as defined by your enterprise security policy. Severity INFO SEC-1192 Message , [SEC-1192], ,, INFO, , Security violation: Login failure attempt via . Probable Cause Indicates that a serial or modem login security violation was - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 466
by a valid Action switch admin. Use the correct password. Severity INFO SEC-1194 Message , [SEC-1194], ,, WARNING, , This switch does not have all the required PKI objects correctly installed. Probable Cause Indicates that there has been a corruption - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 467
account has changed. Recommended No action is required. Action Severity INFO SEC-1198 Message , [SEC-1198], ,, INFO, , Security violation: Unauthorized host with IP address tries to establish API connection. Probable Cause Indicates that an - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 468
-1200 Message , [SEC-1200], ,, INFO, , Security violation: MS command is forwarded from non-primary FCS switch SEC-1201 Message , [SEC-1201], ,, INFO, , Security violation: MS device operates on non- - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 469
Severity INFO SEC-1203 Message , [SEC-1203], ,, INFO, , Login information: Login successful via TELNET/SSH/RSH. IP Addr: - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 470
transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1300 Message , [SEC-1300], ,, INFO, , This switch is in VcEncode mode. Security is not supported. Probable Cause Indicates that the switch is set up - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 471
the database might not be correctly updated for that specific switch. Severity INFO SEC-1303 Message , [SEC-1303], ,, INFO, , This software version does not support security. Probable Cause Indicates that the currently installed software version does not - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 472
Message , [SEC-1305], ,, INFO, , This switch has no zoning license. Probable Cause Indicates steps for re-creating PKI objects outlined in the Secure Fabric OS Administrator's Guide. If PKI objects are valid, verify that an unauthorized switch is not - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 473
[SEC-1307], ,, INFO, , Got response from server . Probable Cause Indicates that after some servers timed out, the specified remote authentication dial-in user service (RADIUS/LDAP) server responded to a switch - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 474
66 SEC-1311 Severity INFO SEC-1311 Message , [SEC-1311], ,, ERROR, , Security mode cannot be enabled because one or more of the password policies is not set to default value. Probable Cause Indicates that the security enable failed on the fabric because - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 475
Cause Indicates that the call to the EM module to retrieve the IP address failed. Recommended Please reboot the system to fix this error. If the problem persists contact your switch service Action provider. Severity ERROR SEC-1315 Message , [SEC-1315], ,, ERROR - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 476
Resolve policy conflict, if there is one, then wait for the fabric to >, [SEC-1320], ,, WARNING, , Non-acl domain tries fabric wide policy Probable Cause Indicates that a domain not supporting an access control list (ACL) policy tried to join - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 477
WARNING, , Some DCC policy is too large, distribution cancelled Probable Cause Indicates that this fabric is not able to support a device Message , [SEC-1323], ,, INFO, , Key(s) \"\" ignored during configdownload. Probable - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 478
66 SEC-1324 SEC-1324 Message , [SEC-1324], ,, INFO, , Fabric transaction failure. RCS error: Probable Cause Indicates that the reliable commit service (RCS) transaction failed with specified reason code. Recommended Verify that the event was - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 479
FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1330 Message Probable Cause , [SEC-1330], ,, ERROR, , command failed - db - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 480
Action to verify and correct the configuration if necessary. Severity ERROR SEC-1331 Message , [SEC-1331], ,, ERROR, , Attempt to enable secure mode failed. Reason: . Probable Cause Indicates that the secModeEnable command failed on the fabric - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 481
>,, ERROR, , SNMP service is not available . Probable Cause Indicates that the simple network management protocol (SNMP) service could not be management protocol (SNMP) service failed and you will not be able to query the switch through SNMP. Recommended Reboot or power cycle - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 482
-1004 Message , [SNMP-1004], , FFDC, ERROR, , Incorrect SNMP configuration. Probable Cause Indicates that the simple network management protocol (SNMP) configuration is incorrect and the SNMP service will not work correctly. Recommended Change the SNMP - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 483
FTP or SCP parameters. Action After the problem is corrected, rerun the supportSave command. Severity WARNING SS-1002 Message , [SS-1002], ,, INFO, , supportSave has stored support information to the USB storage device. Probable Cause Indicates that the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 484
[SS-1003], ,, WARNING, , supportSave's operation to USB storage device aborted. Probable Cause Indicates that a command. Recommended Run usbstorage to check the USB storage device settings. After the USB problem is corrected, Action rerun the supportSave command. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 485
during firmware upgrade. Allow the firmwareDownload command to continue without disruption. Do not fail over or power down the system during firmware upgrade. No action is required. Run the firmwareDownloadStatus command for more information. Severity WARNING SULB-1002 Message , [SULB - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 486
is required. Run the firmwareDownloadStatus command for more information. Action Severity INFO SULB-1005 Message , [SULB-1005], ,, INFO, , Current Active CP is preparing to failover. Probable Cause Indicates that the active CP is about to reboot. The - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 487
message. TABLE 6 Status Messages and Status Codes Status Message Status Code "firmwareDownload sanity check failed." "Sanity check failed because system is non-redundant." "Sanity check failed because firmwareDownload is already in progress." "Sanity check failed because FABRIC OS is disabled - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 488
error." "Sanity check failed because firmwareDownload is already in progress." "Sanity check failed because firmwareDownload is already in progress." NOT USED "System Error." "Active CP forced failover succeeded. Now this CP becomes Active." "Standby CP booted up." "Active and Standby CP failed to - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 489
69 SULB-1009 TABLE 6 Status Messages and Status Codes Status Message Status Code "The original firmware has been restored successfully on Standby CP." 0x7e "Unable to restore the original firmware on Standby CP." 0x7f "Standby CP reboots." 0x80 "Standby CP failed to reboot." 0x81 " - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 490
list file. Check whether the switch is supported by the requested firmware. Also check firmwareDownload RPM package database is inconsistent. Contact your service provider for recovery." 0x13 "Out of create firmware version file." 0x16 "Unexpected system error." 0x17 "Error in getting lock - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 491
firmware, or contact your service provider for recovery." because Device Based Routing policy is not supported by power off these blades before 0x2f proceeding." "Cannot downgrade due to presence of blade type 24. Remove or power . If the problem persists, contact your system administrator. 0x18 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 492
. It is most often caused by network issues. If the problem persists, contact your system administrator. 0x24 - out of disk space. This error may may be caused by an unsupported blade type in the chassis. Remove or power off the unsupported blades before proceeding. Another possible cause may be an - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 493
Administrator's Guide for troubleshooting information. Severity INFO SULB-1010 Message , [SULB-1010], , AUDIT, INFO, , switch service provider. Action Severity INFO SULB-1011 Message , [SULB-1011], ,, INFO, , - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 494
may also caused by an internal Ethernet issue or by a persistent storage hardware failure. Recommended Action Run the slotShow command. If the blade the problem persists, contact your switch service provider. Severity ERROR SULB-1020 Message , [SULB-1020], AUDIT, ERROR, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 495
firmwareDownload command, for example, by powering off and on of the indicated may also be caused by persistent storage hardware failure or by a software problem persists, contact your switch service provider. Severity WARNING SULB-1024 Message , [SULB-1024], AUDIT, WARNING, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 496
by powering the switch off and on in the middle of a firmwareDownload. The error may also be caused by persistent storage hardware problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message , [SULB-1031], , AUDIT, WARNING, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 497
>, [SULB-1034], , AUDIT, ERROR, , Firmwaredownload timed out. Probable Cause The error may be storage hardware failure. Recommended Reset the switch. This will cause the internal image to be relocated again. If the problem persists, Action contact your switch service - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 498
Recommended No action is required. Action Severity INFO SULB-1037 Message , [SULB-1037], , AUDIT, INFO, , HCL failed. Reboot the switch manually using the reboot command. However, it will disrupt the FC traffic. Probable Cause Many reasons can cause HCL - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 499
and contact your switch service provider. Severity ERROR SWCH-1002 Message , [SWCH-1002], ,, INFO, , Security violation: Brocade 7500 or AP7600 switch, reboot or power cycle the switch. Severity ERROR Fabric OS Message Reference 447 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 500
, 5000, 7500, or AP7600 switch, reboot or power cycle the switch. Severity ERROR SWCH-1006 Message , [SWCH-1006], ,, WARNING, , HA state out of sync: Standby CP (ver = ) does not support NPIV functionality. (active ver = - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 501
link. Please refer to the Fabric OS Administrator's Guide for more information about buffers. Severity WARNING SWCH-1008 Message , [SWCH-1008], ,, WARNING, , are port swapped on ports that do not support port swap. Slot will be - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 502
70 SWCH-1008 450 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 503
out during a reboot or failover sequence, waiting for one or more programs to register with system services or to fail over to active status. Recommended Action The switch is in an inconsistent state and can be corrected only by a reboot or power cycle. Before rebooting the chassis, record the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 504
-number>, FFDC, CRITICAL, , Chassis config option is not supported by CP Blade with ID supportSave command to gather troubleshooting data. Issue a reboot or haFailover Action command to recover the system and limit the traffic - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 505
usage. Reboot or power cycle the switch. Run supportFtp as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL SYSM-1002 Message , [SYSM-1002], ,, INFO, , , Switch - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 506
is operational and is properly seated in its slot. Action Severity CRITICAL SYSM-1006 Message , [SYSM-1006], , FFDC, CRITICAL, , CP blade in slot is incompatible with the chassis type. Probable Cause Indicates that this chassis type is not - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 507
MANUAL generated by the tracedump -n command Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity WARNING TRCE-1002 Message , [TRCE-1002], ,, INFO, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 508
to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR TRCE-1004 Message , [TRCE-1004], ,, WARNING, , Trace dump< optional slot indicating on which slot the dump occurs > was not - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 509
set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR TRCE-1008 Message , [TRCE-1008], , FFDC, CRITICAL, , Unable to load trace parameters. Probable Cause Indicates that the active CP is - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 510
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR TRCE-1011 Message , [TRCE-1011], ,, INFO, , Trace dump manually transferred to target ' - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 511
to retrieve trace information from slot . Probable Cause Indicates that communication between the main system and the indicated slot is unavailable. Recommended Check that the AP blade is enabled and retry the command. If the AP blade is already - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 512
73 TRCE-1012 460 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 513
of a failed login is reported to the error log. Severity INFO TRCK-1003 Message , [TRCK-1003], ,, INFO, , Logout by user . Probable Cause Indicates that the track change feature recorded a successful logout. Recommended No action is required - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 514
Run the configShow command to view the configuration file. Action Severity INFO TRCK-1005 Message , [TRCK-1005], ,, INFO, , Track-changes on Probable Cause Indicates that the track change feature has been enabled. Recommended No action is required. Run - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 515
, NTP Query failed: Probable Cause Indicates that a network time protocol ( type of clock server used or configured might be either one of the following: • LOCL Local clock on the but the principal or primary FCS does not support the feature. If the message does not recur - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 516
Message , [TS-1006], ,, INFO, , Probable Cause Indicates that a time service event is occurring or has failed. The message might be one of the following: • Init failed. Time Service exiting Probable Cause: Initialization error, Time Server exits - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 517
1008 Message , [TS-1008], ,, WARNING, , Clock Server used instead of of clock servers configured is being used. This happens when the network time protocol (NTP) query to the current active external clock server fails. Recommended No - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 518
75 TS-1008 466 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 519
detected an inconsistency in the routing database between the routing protocol and the hardware configuration. The first port number displayed is UCST-1020 Message , [UCST-1020], ,, WARNING, , Static route (input-area: , domain: - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 520
76 UCST-1020 468 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 521
Messages 77 UPTH-1001 Message , [UPTH-1001], ,, WARNING, , No minimum cost path in candidate list Probable Cause Indicates that the specified switch is unreachable because no minimum cost path (FSPF UPATH) exists - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 522
77 UPTH-1001 470 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 523
the configure command, refer to the Fabric OS Command Reference. Severity WARNING WEBD-1002 Message , [WEBD-1002], ,, WARNING, , Missing or Invalid Key file -- HTTPS is configured to be enabled but could not be started. Probable Cause Indicates that the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 524
is required. Action Severity WARNING WEBD-1006 Message , [WEBD-1006], ,, INFO, , HTTP server restarted due to logfile truncation Probable Cause Indicates that the size of HTTP logfile exceeded the maximum limit. Recommended No action is required. Action - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 525
FFDC, WARNING, , HTTP server cannot be started Probable Cause Indicates a rare error condition, where the built-in recovery process has failed to restore http services. The problem often results from invalid configuration of ssl certs., but there can be more than one reason for such - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 526
78 WEBD-1008 474 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 527
between the name server (NS) and the zoning modules. This usually indicates that the system was busy. Recommended Action This message generates core dump files of the related modules files and contact your switch service provider. Severity ERROR Fabric OS Message Reference 475 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 528
79 ZOLB-1001 476 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 529
port login (PLOGI) trap processing. This messages usually indicates problems when adding content-addressable memory (CAM) entries before the filter contact your switch service provider. Severity WARNING ZONE-1003 Message , [ZONE-1003], ,, WARNING, , zone(< - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 530
system-name>, port enforcement changed to Session Based HARD Zoning. Probable Cause Indicates that the zoning enforcement changed to session-based WWN) in one zone and in another, this will cause that port to go session based hard zoning. In session-based zoning, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 531
80 ZONE-1006 ZONE-1006 Message , [ZONE-1006], ,, WARNING, , WARNING WWN() in HARD PORT zone . Probable Cause Indicates that one or more devices are zoned as world-wide name (WWN) devices and also zoned as devices - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 532
. Action Severity WARNING ZONE-1013 Message , [ZONE-1013], ,, WARNING, , Quick Loop not supported. Probable Cause Indicates that the QuickLoop feature is not supported in the current code release. If the QuickLoop zoning configuration is enabled on the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 533
. Refer to your switch supplier to obtain a Action Zoning license if you do not have one. Severity ERROR ZONE-1015 Message , [ZONE-1015], ,, WARNING, , Not owner of the current transaction . Probable Cause Indicates that a zoning change - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 534
session based hard zoning (value = 3) • FA zone (value = 5) QuickLoop zones are not supported in Fabric service (RCS) had a transmit error. RCS is a protocol used to transmit changes to the configuration database within a fabric. Recommended Action Often this message indicates a transitory problem - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 535
automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity INFO ZONE-1024 Message , [ZONE-1024], ,, INFO, , . Probable Cause Indicates that the cfgSave command ran successfully - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 536
ZONE-1027 Message , [ZONE-1027], ,, INFO, , Zoning transaction aborted . . Probable Cause due to a variety of potential errors. The error reason variable can be one of the following: • Zone Merge Received: The fabric is in the process - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 537
Guide for information on the zone database sizes supported for each switch. Severity WARNING ZONE-1029 Message , [ZONE-1029], ,, WARNING, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 538
1031], ,, ERROR, , Switch is in interop mode. (switch, port) members not supported. The switch is set to ZONE-1032], ,, ERROR, , Domain Max Zone DB size . Probable Cause Indicates that the specified domain - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 539
is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation. Action Severity ERROR ZONE-1036 Message , [ZONE-1036], ,, ERROR, , Unable to create : error message - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 540
too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation. Action Severity ERROR ZONE-1038 Message , [ZONE-1038], ,, ERROR, , Unable to allocate memory for : error message - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 541
large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation. Action Severity INFO INFO ZONE-1043 Message , [ZONE-1043], ,, INFO, , The Default Zone access mode is set to No Access. Probable Cause - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 542
that this Default Zone access mode change was done intentionally. Action Severity INFO ZONE-1045 Message , [ZONE-1045], ,, INFO, , The Default Zone access mode is already set to No Access. Probable Cause Indicates that the Default Zone access mode is - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 543
Chapter AUDIT AUTH System Messages 81 AUTH-3001 Message AUDIT, , [AUTH-3001], INFO, SECURITY, , , , Event: , Status: success, Info: type - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 544
that an authentication operation using a Diffie Hellman - challenge-handshake authentication protocol (DH-CHAP) failed on the specified port due to mismatched response supportSave command and contact your switch service provider. Severity INFO 492 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 545
persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO AUTH-3008 Message AUDIT, , [AUTH-3008], INFO, SECURITY, , , , Event: - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 546
81 AUTH-3008 494 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 547
Chapter AUDIT CONF System Messages 82 CONF-1000 Message AUDIT, , [CONF-1000], INFO, CFG, , , Probable Cause The system attempted to download a configuration without disabling the switch was unsuccessful because there are one or more parameters - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 548
82 CONF-1022 496 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 549
Chapter AUDIT HTTP System Messages 83 HTTP-1002 Message AUDIT, , [HTTP-1002], INFO, ZONE, , , , Zoning transaction initiated by User: , Role: - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 550
83 HTTP-1003 498 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 551
Chapter AUDIT SEC System Messages 84 SEC-3001 Message AUDIT, , [SEC-3001], INFO, SECURITY, Info>. Probable Cause Indicates that the specified security event has occurred. The Event Name can be one of the following: - There has been an fabric configurations server (FCS) failover. - - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 552
84 SEC-3003 SEC-3003 Message AUDIT, , [SEC-3003], INFO, SECURITY, , , , Event: , Status: success, Info: Created policy, with member(s) . Probable Cause Indicates that a new security policy was created - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 553
moved from position to . Probable Cause Indicates that the fabric configurations server (FCS) list has been modified. One of the members of the list has been moved to a new position in the list, as identified in the message. Recommended Action Verify that the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 554
84 SEC-3009 SEC-3009 Message AUDIT, , [SEC-3009], INFO, SECURITY, , , , Event: , Status: success, Info: Security Transaction aborted. Probable Cause Indicates that the pending security transaction was aborted. Recommended Action - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 555
Name>, Status: success, Info: RADIUS server for AAA services. Probable Cause Indicates that a user has changed the remote authentication dial-in user service (RADIUS) configuration. Recommended Action Verify that the RADIUS configuration was changed intentionally. If - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 556
name> to position . Probable Cause Indicates that a user has changed the position of the remote authentication dial-in user service (RADIUS) server. Recommended Action Verify that the RADIUS server position was intentionally changed. If the RADIUS server position was intentionally - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 557
84 SEC-3018 SEC-3018 Message AUDIT, , [SEC-3018], INFO, SECURITY, , , , Event: , Status: success, Info: Parameter [] changed from [] to []. Probable Cause Indicates that the specified passwdCfg - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 558
password attempts exceeded, the account has been locked. Recommended The Account may automatically unlock after the lockout duration has expired or an administrator Action may manually unlock the account. Severity INFO 506 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 559
84 SEC-3024 SEC-3024 Message AUDIT, , [SEC-3024], INFO, SECURITY, , , , Event: , Status: success, Info: User account [], password changed. Probable Cause Indicates that the user's password changed. Recommended Action - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 560
84 SEC-3027 SEC-3027 Message AUDIT, , [SEC-3027], INFO, SECURITY, , , , Event: , Status: success, Info: User account [] []. Probable Cause Indicates that user account properties were changed. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 561
84 SEC-3030 SEC-3030 Message AUDIT, , [SEC-3031], INFO, SECURITY, , , , Event: , Status: success, Info: Probable Cause Indicates the specified secCertUtil operation was performed. Recommended Action Verify - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 562
84 SEC-3033 SEC-3033 Message AUDIT, , [SEC-3033], INFO, SECURITY, , , , Event: fddcfg --fabwideset, Status: success, Info: Fabric wide configuration set to . Probable Cause Indicates that the specified - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 563
Securty Violation, Status: failed, Info: Unauthorized host with IP address tries to establish connection using . Probable Cause Indicates that a security violation was reported. The IP address of the unauthorized host is displayed in the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 564
Severity INFO SEC-3045 Message AUDIT, , [SEC-3045], INFO, SECURITY, , , System has been zeroized. Probable Cause Indicates that the system has been zeroized. Recommended Action Verify that the security event was planned. If the security event - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 565
, [SEC-3048], INFO, SECURITY, , , FIPS mode has been enabled in the system using force option. Probable Cause Indicates that the system has been forced to FIPS mode. Recommended Action Verify that the security event was planned. If the security - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 566
84 SEC-3049 514 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 567
System Messages 85 SNMP-1004 Message AUDIT, , [SNMP-1004], ERROR, CONFIGURATION, , , , Incorrect SNMP configuration. Probable Cause Indicates that the simple network management protocol (SNMP) configuration s incorrect and the SNMP service - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 568
85 SNMP-1006 516 Fabric OS Message Reference 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 569
Chapter AUDIT SULB System Messages 86 SULB-1001 Message AUDIT, , [SULB-1001], WARNING, FIRMWARE, firmwareDownload command to continue without disruption. Do not fail over or power down the system during firmware upgrade. Run the firmwareDownloadStatus command for more information. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 570
sake of completeness. TABLE 9 Status Messages and Status Codes Status Message Status Code "firmwareDownload sanity check failed." "Sanity check failed because system is non-redundant." "Sanity check failed because firmwareDownload is already in progress." "Sanity check failed because FABRIC OS is - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 571
error." "Sanity check failed because firmwareDownload is already in progress." "Sanity check failed because firmwareDownload is already in progress." NOT USED "System Error." "Active CP forced failover succeeded. Now this CP becomes Active." "Standby CP booted up." "Active and Standby CP failed to - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 572
86 SULB-1009 TABLE 9 Status Messages and Status Codes Status Message Status Code "The original firmware has been restored successfully on Standby CP." 0x7e "Unable to restore the original firmware on Standby CP." 0x7f "Standby CP reboots." 0x80 "Standby CP failed to reboot." 0x81 " - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 573
list file. Check whether the switch is supported by the requested firmware. Also check firmwareDownload RPM package database is inconsistent. Contact your service provider for recovery." 0x13 "Out of create firmware version file." 0x16 "Unexpected system error." 0x17 "Error in getting lock - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 574
firmware, or contact your service provider for recovery." because Device Based Routing policy is not supported by power off these blades before 0x2f proceeding." "Cannot downgrade due to presence of blade type 24. Remove or power . If the problem persists, contact your system administrator. 0x18 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 575
. It is most often caused by network issues. If the problem persists, contact your system administrator. 0x24 - out of disk space. This error may may be caused by an unsupported blade type in the chassis. Remove or power off the unsupported blades before proceeding. Another possible cause may be an - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 576
the Fabric OS Administrator's Guide for troubleshooting information. Severity INFO SULB internal Ethernet issue or by a persistent storage hardware failure. Recommended Action Run the slotShow firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 577
the blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1020 Message AUDIT, by powering off and on of the indicated BP blade in the middle of a firmwareDownload. The error may also be caused by persistent storage hardware - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 578
command to monitor the progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1024 Message AUDIT, for example, by powering the switch off and on in the middle of a firmwareDownload. The error may also be caused by persistent storage hardware failure or - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 579
Run the firmwareDownloadStatus Action command to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message AUDIT, , by an internal Ethernet issue or by persistent storage failure. Fabric OS Message Reference 527 53-1000600-01 - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 580
It may also be caused by the internal Ethernet or persistent storage hardware failure. Recommended Reset the switch. This will cause the internal image to be relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR SULB-1037 Message AUDIT, - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 581
Chapter AUDIT ZONE System Messages 87 ZONE-3001 Message AUDIT, , [ZONE-3001], INFO, ZONE, , , , Event: , Status: success, Info: \"< - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 582
87 ZONE-3003 ZONE-3003 Message AUDIT, , [ZONE-3003], INFO, ZONE, , , , Event: , Status: success, Info: \"\" deleted. Probable Cause Indicates that the specified zone object has been deleted. The - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 583
87 ZONE-3006 ZONE-3006 Message AUDIT, , [ZONE-3006], INFO, ZONE, , , , Event: , Status: success, Info: Current zone configuration disabled. . Probable Cause Indicates that the current zone configuration has been disabled. - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 584
87 ZONE-3009 ZONE-3009 Message AUDIT, , [ZONE-3009], INFO, ZONE, , , , Event: , Status: success, Info: . Probable Cause Indicates that the specified zone transaction has been aborted. Recommended Verify that the - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 585
87 ZONE-3012 ZONE-3012 Message AUDIT, , [ZONE-3012], INFO, ZONE, , , , Event: , Status: success, Info: Zone object \"\" renamed to \"\". Probable Cause Indicates that the specified zone object - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 586
87 ZONE-3015 ZONE-3015 Message AUDIT, , [ZONE-3015], INFO, FABRIC, , , , Event: , Status: success, Info: AD configurations applied. Probable Cause Indicates that the current admin domain (AD) configuration has been saved to flash is - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 587
87 ZONE-3018 ZONE-3018 Message AUDIT, , [ZONE-3018], INFO, FABRIC, , , , Event: , Status: success, Info: has been deactivated. Probable Cause Indicates that the specified admin domain (AD) object has been - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 588
87 ZONE-3021 ZONE-3021 Message AUDIT, , [ZONE-3021], INFO, FABRIC, , , , Event: , Status: success, Info: AD object \"\" renamed to \"\". Probable Cause Indicates that the specified admin domain ( - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 589
87 ZONE-3024 ZONE-3024 Message AUDIT, , [ZONE-3024], INFO, FABRIC, , , , Command: , Status: success, Info: executed. . Probable Cause Indicates that the admin domain ad --transabort operation was successful in the specified - HP StorageWorks 4/64 | Brocade Error Message Reference Guide v6.0.0 (53-1000600- - Page 590
87 ZONE-3025 538 Fabric OS Message Reference 53-1000600-01
53-1000600-01
19 October 2007
Fabric OS
Message Reference
Supporting Fabric OS v6.0.0