HP StorageWorks 4/64 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 632
snmpConfig, Synopsis, default, Description, Notes, Operands
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 632 highlights
2 snmpConfig snmpConfig Manages the SNMP agent configuration. Synopsis snmpConfig --show | --set | --default [snmpv1 | snmpv3 | accessControl | mibCapability | systemGroup | seclevel] Description Use this command to manage the configuration of the SNMP agent in the switch. The configuration includes SNMPv1 and SNMPv3 configuration, access control list (ACL), MIB capability, system group, and security level settings. The command supports set, reset to default, and display operations. All values successfully changed by this command take effect immediately and are persistent across power cycles and reboots. Notes The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands This command supports the following operands: --show Displays the SNMP agent configuration data of the specified category. --set Sets the SNMP agent configuration data of the specified category. This operand displays the current settings and then prompts you to change the values for each parameter. --default Sets the SNMP agent configuration data for a specified item to the default values. Generally, these default values might be available in the configuration database. It sets to factory default settings if the SNMP agent configuration parameters are not available in the configuration database. --show, --set, and --default support the following arguments: snmpv1 Selects SNMPv1-related configuration parameters. These parameters include the community string, trap recipient IP address, and trap severity level associated with each trap recipient IP address. snmpv3 Selects SNMPv3-related configuration parameters. These parameters include user name, authentication protocol and password, SNMPv3 trap recipients IP address, associated user index, and trap severity level. accessControl Selects access-control-related parameters. These parameters include access host subnet area and access permission (read-write). mibCapability Selects configuration parameters related to the SNMP agent's MIBs and trap capability parameters. These parameters include MIBs and traps supported by the SNMP agent. systemGroup Selects configuration parameters related to the system group. These parameters include sysDescr, sysLocation, sysContact, and authentication failure trap. secLevel Sets SNMP security level. 606 Fabric OS Command Reference 53-1000599-02