HP StorageWorks 4/64 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 83
cfgClear
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
cfgClear 2 cfgClear Clears all zone configurations. Synopsis cfgclear Description Use this command to clear all zone information in the transaction buffer. All defined zone objects in the transaction buffer are deleted. If an attempt is made to commit the empty transaction buffer while a zone configuration is enabled, you are warned to first disable the enabled zone configuration or to provide a valid configuration with the same name. After clearing the transaction buffer using the cfgClear command, use the cfgDisable command to commit the transaction and then disable and clear the zone configuration in nonvolatile memory for all the switches in the fabric. If no current zoning configuration exists, use the cfgSave command. If the default zone access mode is "No Access", then this command re-creates the default zoning objects. Note When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands none Examples To clear all zones and then clear nonvolatile memory: switch:admin> cfgclear The Clear All action will clear all Aliases, Zones, FA Zones and configurations in the Defined configuration. cfgSave may be run to close the transaction or cfgTransAbort may be run to cancel the transaction. Do you really want to clear all configurations? (yes, y, no, n): [no] n switch:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] n See Also cfgDisable, cfgEnable, cfgSave Fabric OS Command Reference 57 53-1000599-02