HP StorageWorks 4/64 Brocade Fabric Watch Administrator's Guide v6.3.0 (53-100 - Page 82
Setting recipient mail address for e-mail alert, Relaying host IP configuration
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
6 Fabric Watch notification Setting recipient mail address for e-mail alert 1. Type 5 in the fwMailCfg menu to specify the recipient to whom Fabric Watch should send the e-mail alert for a class. The configShow menu displays. 2. Select a class. The following prompt displays: Mail To: [NONE] Enter the e-mail address of the person responsible for the specific class of alerts. Fabric Watch uses the default value, located between the brackets in the prompt, as the current e-mail address for the class. A value of NONE indicates that no e-mail address has been provided. NOTE E-mail addresses must not exceed 128 characters. The system displays a confirmation message and returns to the main fwMailCfg menu. Relaying host IP configuration 1. Type 6 in the fwMailCfg menu to configure a relay host IP address. The relay host configuration menu is displayed. 1 Display Relay Host configuration 2 Set Relay Host IP 3 Remove Relay Host configuration 4 Quit 2. Select 2 to set the relay host IP address. The following message displays: enter the Relay Host IP: 3. Enter the relay host IP address (example: 192.168.39.118). The following message displays: Setting 192.168.39.118 as Relay Host.. 4. Enter the Domain Name (example: Brocade.com). Displaying the relay host configuration 1. Type 6 in the fwMailCfg menu to display the relay host configuration menu. 1 Display Relay Host configuration 2 Set Relay Host IP 3 Remove Relay Host configuration 4 Quit 2. Type 1 to display the configuration. 58 Fabric Watch Administrator's Guide 53-1001342-01