HP StorageWorks 4/8 Brocade Fabric OS Command Reference Manual - Supporting Fa - Page 458
This command requires a Brocade Advanced Performance Monitoring license.
View all HP StorageWorks 4/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 458 highlights
2 perfMonitorShow Num_domains Total number of domains being monitored Domain_count 64-bit cumulative transmit counter for each individual domain This command requires a Brocade Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands The operands are as follows: --class monitor_class The monitor class, which can be one of EE (end-to-end), FLT (filter-based), or ISL (interswitch link). These values are case-sensitive. slotnumber For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be added, followed by a slash (/). portnumber Specifies the number of the port on which the monitor is to be displayed, relative to its slot for bladed systems. Use switchShow for a list of valid ports. interval Specifies an interval in (5 or more) seconds. In the case of end-to-end monitor, the Tx and Rx counts are in the unit of byte when this operand is specified. This operand is optional; if omitted, this command displays cumulative counts. Examples To display when a monitor is created using an application that passes IPV6 addresses: switch:admin> perfmonitorshow --class FLT 0 KEY ALIAS OWNER_APP Frame_Count OWNER_IP_ADDR 0 IPFrame API 0x0000000000000000 1080::8:800:200C:417A 1 SCSIFrame API 0x0000000000000000 1080::8:800:200C:417A To display EE monitors configured on the switch port number using an application that passes an IPV6 address: sitch:admin> perfmonitorshow --class EE 2/8 There is 1 end-to-end monitor(s) defined on port 0. KEY SID DID OWNER_APP TX_COUNT 0 0x000000 0x111111 TELNET 0x0000000000000000 RX_COUNT CRC_COUNT OWNER_IP_ADDR 0x0000000000000000 0x0000000000000000 N/A To display end-to-end monitor on a port at an interval of every 6 seconds: switch:admin> perfmonitorshow --class EE 4/5 6 perfmonitorshow 53, 6: Tx/Rx are # of bytes and crc is # of crc errors 0 1 2 3 4 crc Tx Rx crc Tx Rx crc Tx Rx crc Tx Rx crc Tx Rx 426 Fabric OS Command Reference Manual 53-1000436-01