HP StorageWorks 4/8 Brocade Fabric OS Command Reference Manual - Supporting Fa - Page 567
zero. Optionally, use, Displays all the GbE port statistics related to IP addresses that are on
View all HP StorageWorks 4/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 567 highlights
portStatsShow 2 Operands This command has the following operands: slotnumber For bladed systems only, specifies the slot number of the port to be displayed, followed by a slash (/). [ge]portnumber Specifies a port number to be configured, relative to its slot for bladed systems. Specify the optional ge option to display the GbE port hardware statistics. Use switchShow to display a list of valid ports. ge Displays the GbE statistics. ip Displays all the GbE port statistics related to IP addresses that are on (not zero). Optionally, use ipaddress to display statistics for the specified IP address. fcip Displays the GbE statistics on all FCIP tunnels. Optionally, use tunnelnumber to display statistics for the specified FCIP tunnel. Examples To display the basic set of statistics for a port: switch:admin> portstatsshow 13 stat_wtx 0 stat_wrx 0 stat_ftx 0 stat_frx 0 stat_c2_frx 0 stat_c3_frx 0 stat_lc_rx 0 stat_mc_rx 0 stat_mc_to 0 stat_mc_tx 0 tim_rdy_pri 0 tim_txcrd_z 0 er_enc_in 0 er_crc 0 er_trunc 0 er_toolong 0 er_bad_eof 0 er_enc_out 0 er_bad_os 0 er_c3_timeout 0 er_c3_dest_unreach 0 unreachable er_other_discard 0 er_zone_discard 0 mismatch er_crc_good_eof 0 er_inv_arb 0 open 0 transfer 0 opened 0 starve_stop 0 fl_tenancy 0 nl_tenancy 0 zero_tenancy 0 4-byte words transmitted 4-byte words received Frames transmitted Frames received Class 2 frames received Class 3 frames received Link control frames received Multicast frames received Multicast timeouts Multicast frames transmitted Time R_RDY high priority Time BB credit zero Encoding errors inside of frames Frames with CRC errors Frames shorter than minimum Frames longer than maximum Frames with bad end-of-frame Encoding error outside of frames Invalid ordered set Class 3 frames discarded due to timeout Class 3 frames discarded due to destination Other discards Class 3 frames discarded due to zone Crc error with good eof Invalid ARB loop_open loop_transfer FL_Port opened tenancies stopped due to starvation number of times FL has the tenancy number of times NL has the tenancy zero tenancy To display GbE port statistics for slot 8 and GbE port 1: switch:admin> portstatsshow ge 8/ge1 ge_stat_tx_frms 0 GE transmitted frames Fabric OS Command Reference Manual 535 53-1000436-01