HP StorageWorks 4/8 HP StorageWorks Fabric OS 6.0.1a release notes (AA-RWFMA-T - Page 21

Fabric OS 6.0.0a fixes Table 6 lists defects closed in the Fabric OS 6.0.0a firmware release. Table 6 Fabric OS 6.0.0a closed defects Closed defect summary Solution In some cases, frame loss is observed during normal FICON I/O. Fixed in Fabric OS 6.0.0a Top Talkers counters are inaccurate when enabled on more than one Workaround: Enable the Top Talkers Fx_port at a time. feature only on individual Fx_ports. A FICON emulation error is generated when running FICON emulation tape pipelining to STK/SUN tape drives when read emulation is enabled. Workaround: To clear the XRC CU busy error, disable and re-enable the tunnel. The DC Director may ASSERT in a specific test scenario while running a particular FICON test program (SAK IRNDUP). Fixed in Fabric OS 6.0.0a In interop mode, an F_Port connected into a shared area of a 48-port blade in a DC Director will not show up in the distributed name server. Workaround: Move devices out of the shared area into a non-shared area. 2Gb Channels fail to come online from T-Rexx to a 128-port 4/256 SAN Director. Fixed in Fabric OS 6.0.0a In some cases where an FCIP address is on a different subnet, a MAC level broadcast is sent instead of the router's MAC. Fixed in Fabric OS 6.0.0a Federal Information Processing Standard (FIPS) related changes required in response to the FIPS audit. Fixed in Fabric OS 6.0.0a Not able to add 96-bit license after upgrading from Fabric OS 5.3.x to 6.0. Fixed in Fabric OS 6.0.0a HP StorageWorks Fabric OS 6.0.1a release notes 21