HP StorageWorks 8/20q HP StorageWorks 8/20q and SN6000 Fibre Channel CIM Agent - Page 19

• 2-Enable: Suppresses the reception of RSCN messages from other ports for which IOStreamGuard is enabled. • 3-Disable: Allows free transmission and reception of RSCN messages. RequestedPerformanceTuningMode Property contains the configured Performance Tuning mode. The operational Performance Tuning mode is reported by the FCPort.PerformanceTuning property. Valid values for this property are reported by the SupportedPerformanceTuningModes property of the corresponding FCPortCapabilities instance. Supported values are: • 1-AutoSense • 2-None • 3-MFS: Multi-frame sequence interleaving is suppressed. • 4-VI: Enable support for VI frames. • 5-LCF: Preference routing for link control frames. • 6-VI-LCF: Enable both VI and LCF DeviceScanEnable Property contains a Boolean value indicating that the Device Scan feature is enabled. The Device Scan feature queries the connected device during login for FC-4 descriptor information. Disable this property only if the scan creates a conflict with the connected device. This property may be edited if the DeviceScanConfigurable property of the corresponding FCPort instance is TRUE. Supported WBEM operations • getClass • getInstance • enumerateInstances • enumerateInstanceNames • modifyInstance • setProperty Associations • QLGC_FCPortElementCapabilities : CIM_ElementCapabilities-1-to-1 relationship to QLGC_FCPort QLGC_FCSwitchCapabilities : CIM_EnabledLogicalElementCapabilities There is one instance of FCSwitchCapapilities representing the configuration capabilities of the switch hosting the CIM Agent. Note that, switch capabilities may change over time as a result of hardware or license, or operating mode changes. Supported properties and methods InstanceID Opaque Identifier ElementName Property contains the string FC Switch Capabilities. ElementNameEditSupported Property contains a Boolean value that is TRUE if the FCSwitch.ElementName property may be modified, or FALSE if the property is read-only. MaxElementNameLen Property contains the maximum string length of the FCSwitch.ElementName property. RequestedStatesSupported Property contains an array of acceptable values for the FCPort.RequestStateChange method. Possible values are: HP StorageWorks 8/20q and SN6000 Fibre Channel Switch CIM Agent Reference Guide 19