HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch CIM Agent ref - Page 21

fabric. If FALSE, the switch will use the preferred domainID where possible, and fail over to an available domainID in the event of a domainID conflict. This property may be edited if the value of FCSwitchCapabilities.EditDomainIDLocked property is TRUE. PrincipalPriority Property contains an enumerated principal priority configuration for the switch. Valid values for this property are reported by the PrincipalPrioritiesSupported property of the corresponding FCSwitchCapabilities instance. Possible values are: • 2-Principal: (FC-SW2)Switch_Priority=1 • 3-Subordinate: (FC-SW2)Switch_Priority=255 • 4-Any: (FC-SW2)Switch_Priority=254 Supported WBEM operations • getClass • getInstance • enumerateInstances • enumerateInstanceNames • modifyInstance • setProperty Associations • QLGC_FCSwitchElementSettingData : CIM_ElementSettingData-1-to-1 relationship to QLGC_FCSwitch QLGC_RemoteServiceAccessPoint : CIM_RemoteServiceAccessPoint RemoteServiceAccessPoint is used by the access points sub-profile to expose connectivity information for services and interfaces on the switch. There may be as many as five instances of RemoteServiceAccessPoint depending on which services are enabled on the switch. Supported properties and methods CreationClassName Property contains the string QLGC_RemoteServiceAccessPoint. Name Property contains a fixed string based on the type of service. • ServiceType: Name Value • snmp: SNMP Interface • telnet: Telnet Interface • ssh: SSH Interface • EmbeddedGUI: Web User Interface • ethernet: Ethernet Port IP Address SystemCreationClassName Property contains the string QLGC_FCSwitch. SystemName Property contains the switch WWN. AccessInfo Property contains a string value using standard URI syntax, except for the Ethernet interface which is described as an IP address in Ipv4 dot notation. ServiceType and Value • snmp: snmp://