HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch CIM Agent ref - Page 23

ApplyConfiguration Method will apply this configuration object as the current configuration on the switch, and reset the switch. Parameters: • ValidateOnly: [required] Must be FALSE. • TypeOfConfiguration: [required] Must be 2-Running/Current Configuration. • ManagedElement: [required] Must be the ObjectPath of a QLGC_FCSwitch instance associated to the switch RegisteredProfile object. Returns: • 0: Success • 5: Invalid Parameter. One or more parameters do not conform to the parameter limitations above. • 16000: Validate Only Request Not Supported; ValidateOnly must be FALSE • 16001: ConfigurationData is invalid; Validation failure during while applying configuration. • 16002: Element Does Not Support Initial/Default Configs; TypeOfConfiguration must be 2. • 16003: Element Does Not Support Possible Configs/Config; TypeOfConfiguration must be 2. • 16005: Element Cannot Be Configured; Probably the result of an invalid ManagemedElement parameter. Request Status Codes: • CIM_ERR_ACCESS_DENIED: User does not have authorization for this command, or another user is configuring the switch; retry later. • CIM_ERR_INVALID_PARAMETER: One or more required parameters are missing. • CIM_ERR_NOT_FOUND: The ConfigurationData instance was not found. ElementName Property contains the string Switch Configuration Image. InstanceID Opaque Identifier Supported WBEM operations • getClass • getInstance • enumerateInstances • enumerateInstanceNames • createInstance • invokeMethod Associations • QLGC_FCSwitchConfigurationData : CIM_ElementSettingData-1-to-1 relationship to QLGC_FCSwitch 8/20q Fibre Channel Switch CIM Agent reference guide 23