HP StorageWorks 8/40 HP StorageWorks Fabric OS 6.2.0e release notes (5697-0354 - Page 45
Ficud panic and reboot on HP StorageWorks DC SAN Backbone
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Command ipaddrshow does not show the IP address of a blade that is seated in slot 12 of an HP StorageWorks DC SAN Backbone Director. Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Issue ipaddrshow -slot 12 to get the information. Re-key of LUNs hosted through active/passive ports will not complete if started on the passive path. Fixed in Fabric OS 6.2.0. Wave Length column in port optics dialog is currently blank. Fixed in Fabric OS 6.2.0. Host may lose targets on edge AG in cascaded setup when failover from core-AG to another core-AG connected to different edge fabric switches. Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Disable/enable the N_Port. Web Tools zoning breaks when third-party storage virtualization appliance changed to standby mode. Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Change the third-party storage virtualization appliance to standby cf mode. The removal of an encryption performance upgrade license is not prevented. Fixed in Fabric OS 6.2.0. After configuring HP StorageWorks 8/8 or 8/24 SAN Switch AG so that F_Port Trunking works and then performing portdisable on NPorts and then hareboot the 8/8 or 8/24 SAN Switch AG caused unexpected termination of AGD Fixed in Fabric OS 6.2.0. Audit Log [ZONE -3001] not generated when a member is added to TI Zone. Fixed in Fabric OS 6.2.0. The topologyshow command cannot show the "In ports" mapped to "Out port" in port-based routing policy. Fixed in Fabric OS 6.2.0. TCP RX Window advertisement can be much smaller than the actual size of the RX Window. Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Reduce the committed rate on the FCIP tunnel until the RX window is less than 33 MB. FICON Tape Write Pipelining selectively resets after CmdRetry to No Op Sequence or LBY. Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Disable FICON Tape Write Pipelining. Ficud panic and reboot on HP StorageWorks DC SAN Backbone Director occurs after executing host command to display the switch. Fixed in Fabric OS 6.2.0. The event description from swEventTraps (related to RLIR events) is not well formatted. Fixed in Fabric OS 6.2.0. Four-node LUN discovery fails if one of the LUN out of 4 LUNs is trespassed. Fixed in Fabric OS 6.2.0. Third-party application paths fails when FC Fast Write is enabled with bi-directional traffic. Fixed in Fabric OS 6.2.0. Java running out of memory in Web Tools. Fixed in Fabric OS 6.2.0. HP StorageWorks Fabric OS 6.2.0e release notes 45