HP StorageWorks 8/8 Brocade Fabric Watch Administrator's Guide v6.3.0 (53-1001 - Page 111
In this appendix, Fabric Watch default settings, Class default settings
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Default Settings Appendix B In this appendix •Fabric Watch default settings 87 •Environment class default settings 88 •Fabric class default settings 90 •Performance Monitor class default settings 91 •Port class default settings 92 •Resource class default settings 98 •Security class default settings 98 •SFP class default settings 101 Fabric Watch default settings After you activate Fabric Watch, it automatically uses a set of default factory settings that might vary from system to system, depending on the software version and the switch hardware. Using the the default Fabric Watch configurations allows for rapid deployment and immediate fabric monitoring. If you want to define your own unique event condition, such as threshold traits, alarms, and e-mail configuration, see "Fabric Watch basic configurations" on page 33. A custom setting takes precedence over the default setting. Make sure to confirm that the custom setting is active (rather than the default setting). Class default settings The tables in the following sections list default values for all classes except the FRU class, which has none. The tables list all of the default values used for the default Fabric Watch configuration settings when running Fabric OS v6.3.0 on the supported Brocade platforms listed under "Supported hardware and software" on page xviii. Values for earlier versions of Fabric OS might differ. Fabric Watch Administrator's Guide 87 53-1001342-01