HP StorageWorks EVA3000 HP StorageWorks 3000/5000 Enterprise Virtual Array upd - Page 32
Initializing, rmware code load, Storage system updating, rmware
View all HP StorageWorks EVA3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
9. Click OK to upgrade the system software on the controllers. Click Cancel to stop the code load process and return to the Storage System Properties window. The upgrade process begins and the Initializing firmware code load page opens. See Figure 11. This page is displayed until the controller code load is complete and the controllers restart. During this interval both controllers resync and begin operating on the new firmware code. Once the resync is complete, the controllers begin processing host I/Os. Additional code within the storage system is now updated, which can take up to 10 minutes to complete. This includes firmware on the EMU and I/O modules in the disk enclosures. During this interval, the Storage System Updating Firmware window opens. See Figure 12. Figure 11 Initializing firmware code load Figure 12 Storage system updating firmware 10. When the firmware upgrade is complete, the Initialized Storage System Properties window opens. Verify the version of the storage system software. It should be 4.100. 32 Upgrading the Enterprise Virtual Array