HP StorageWorks EVA4000 HP EVA4000/6000/8000 and EVA4100/6100/8100 Updating Pr - Page 54
Upgrading firmware on an individual disk, Step 7. Entering storage system passwords
View all HP StorageWorks EVA4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Figure 23 Code Load Disk Drives - Page 3 window 12. Click Finish. Upgrading firmware on an individual disk If you need to upgrade the firmware on a single disk, download the firmware and installation instructions from the following website: http://www.hp.com/support/evadiskfirmware IMPORTANT: Upgrading disk drive firmware on a single disk can be performed online or offline, unless the disk is a member of a disk group that contains Vraid0 virtual disks. If so, when using HP Command View EVA 9.2 or later, you can upgrade disks that contain Vraid0 virtual disk data by halting all host I/O to the Vraid0 virtual disks (other Vraid virtual disks can continue to service host I/O). When using HP Command View EVA versions earlier than 9.2, you must either delete the Vraid0 virtual disks or ungroup the disks individually before upgrading disk drive firmware. 1. To select your product, click HP EVA Fibre Channel Storage Drive Firmware Bundle or HP P6000 EVA SAS Storage Drive Firmware Bundle. 2. Click Cross operating system (BIOS, Firmware, Diagnostics, etc.). 3. Do one of the following: • To download the bundled image, click Download. • To view documentation, under Description, click the image of your choice, HP EVA Fibre Channel Storage Drive Firmware Bundle or HP P6000 EVA SAS Storage Drive Firmware Bundle. Click the Installation Instructions tab. Step 7. Entering storage system passwords Estimated time to complete: 10-15 minutes 54 Upgrading the Enterprise Virtual Array