HP StorageWorks MA8000 HP StorageWorks HSG80 ACS Solution Software V8.8 for IB - Page 217
Before You Install the Client, Start > Settings > Control, Panel
View all HP StorageWorks MA8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Installing, Configuring, and Removing the Client Before You Install the Client 1. Verify that you are logged into an account that is a member of the administrator group. 2. Check the software product description that came with the software for a list of supported hardware. 3. Verify that you have the SNMP service installed on the computer. SNMP must be installed on the computer for this software to work properly. The Client software uses SNMP to receive traps from the Agent. The SNMP service is available on the Windows NT, Windows 2000, and Windows Server 2003 installation web kit. To verify that you have the SNMP service: - For Windows NT, double-click Services in Start > Settings > Control Panel. The entry for SNMP is shown in this window. If you install the SNMP service and you already have Windows NT Service Pack 6A on the computer, reinstall the service pack after installing the SNMP service. - For Windows 2000 and Windows Server 2003, click Start > Settings > Control Panel > Administrative Tools > Services. The entry for SNMP is shown in the Services window. 4. Read the release notes. 5. Read "Installing the Integration Patch", page 219, in this appendix. 6. If you have the Command Console Client open, exit the Command Console Client. 7. If you have Command Console Client V1.1b or earlier, remove the program with the Windows Add/Remove Programs utility. 8. If you have a previous version of Command Console, you can save the Navigation Tree configuration by copying the SWCC2.MDB file to another directory. After you have installed the product, move SWCC2.MDB to the directory to which you installed SWCC. 9. Install the HS-Series Agent. For more information, see Chapter 4. 10. Download the same IBM AIX Platform Kit for HSG80 into an empty directory on your Windows system as was done for your AIX IBM server. 11. Untar the kit into this directory. Note: Utilities like WinZip can be used to untar the kit. HSG80 ACS Solution Software V8.8 for IBM AIX Installation and Configuration Guide 217