HP StorageWorks MSA 2/8 HP StorageWorks ISL Trunking V3.1.x/4.1.x User Guide ( - Page 53
Operands, Example, See Also, trunkdebug, Syntax, Availability, Description
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
ISL Trunking Commands Operands Example This command has the following required operand: 0|1 - Specify 1 to enable trunking on all the ports on this switch. Specify 0 to disable trunking on all the ports on this switch. Enabling trunking on a switch: switch:admin> switchcfgtrunk 1 Committing configuration...done. See Also Also see the following related commands: portcfgtrunkport portshow portcfgshow switchshow trunkdebug Syntax This command uses the following syntax: trunkdebug Availability This command is available to admin users only. Description Use this command to debug a trunk link failure. This command reports one of the following messages based on the trunking properties of the two specified ports: ■ Switch doesn't support trunking ■ Trunking license required ■ Trunking is not supported in switch interop mode ■ port is not E_Port ISL Trunking Version 3.1.x/4.1.x User Guide 53