HP StorageWorks MSA1510i HP StorageWorks 1510i Modular Smart Array firmware 2. - Page 4

• Added the following CLI command enhancements, limiting output display for the following commands: • show ip • show arp • show discovery • show isn_server • show acl_entry • show target • show portal • show portal_group • show iscsi_keys • show initiator • Added the following CLI command enhancements, adding the following new commands for Active/Active: • show preferred_path; set preferred_path • show auto_path_change; set auto_path_change • show proxystats • show taskstats • Added the following ADU enhancements: • Added Discovey, iSNS and iSNS server settings to ADU report. • Added MIB statistics to ADU report. • Converted index numbers in ADU report into readable form. (Instead of index numbers the alias name is now displayed.) • Fixed various formatting errors in ADU report. (Some IP addresses were previously displayed in HEX.) • Sort Statistics based on target/initiator information for CLI / ADU / SMU. • Added route table support for SMU, ADU and CLI. (Route entries are sorted by dynamic/static/data/loop-back entries.) • Added fan-, cache-, power supply - information for external storage box to ADU report. • In dual-controller configurations, added support for an active management port on each controller with a unique IP address, subnet and VLAN. • In dual-controller configurations, added support for unique iSNS settings for each controller. • In dual-controller configurations, added support for unique SNMP trap destinations for each con- troller. Fixes • HP StorageWorks MSA1510i firmware 2.00 upgrade is not recommended until further notice (Customer Advisory c01539430) • LUNs are no longer reset during expansion (Customer Advisory 640436). • LUNs no longer become unavailable with I/O errors during a server reboot (Customer Advisory 640411). • Idle sessions are now timed out after 10 minutes. • No longer lose connectivity to storage LUNs on VMware ESX. • Server reboots no longer cause multiple failovers. 4