HP StorageWorks MSA20 StorageWorks Modular Smart Array 20 User Guide - Page 27

4 Configuring the Enclosure Drives The following tools are available for configuring the drives in an MSA20 enclosure: • The HP Array Configuration Utility (ACU)-A versatile, browser-based utility that provides you with maximum control over the configuration parameters • The HP Option ROM Configuration for Arrays utility (ORCA)-A simple ROMbased utility that runs on all operating systems • The MSA1500 cs Command Line Interface (CLI)-A tool for configuring and managing an MSA1500 cs and its attached storage NOTE: Old versions of ACU and ORCA do not support the MSA20. Before using one of these utilities, upgrade the firmware and drivers on the external sixth-generation Smart Array controller. The latest version of ACU is downloadable from the HP website, http://www.hp.com. For further information about using ACU, or for conceptual information about arrays, logical drives, and fault-tolerance methods, refer to the HP Array Configuration Utility User Guide. This document is available on the Documentation CD provided in the MSA20 kit. For further information about using ORCA, and for a detailed comparison of the features and capabilities of ORCA and ACU, refer to the user guide for the sixthgeneration controller to which the MSA20 is connected. This document is available on the Documentation CD that was provided in the controller kit. Alternatively, you can download a copy of the document from the appropriate controller-specific page on the HP website, http://www.hp.com. For further information about using the CLI, refer to the MSA1500 cs documentation at http://www.hp.com/go/msa1500cs. HP StorageWorks Modular Smart Array 20 User Guide 4-1