HP StorageWorks XP12000 HP StorageWorks XP Disk Array Configuration Guide: Nov - Page 20
Verifying client operations, NetWare 6.0
View all HP StorageWorks XP12000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
4. You are now prompted to select the desired mount action. Click either Mount all volumes or Mount volumes selectively as desired. The mount status for all volumes is now displayed. 5. If you chose to mount volumes selectively, select the desired volume, press Enter to mount the volume, and then confirm that the volume's status changed to MOUNTED. Repeat this step for each new volume to confirm that all new volumes can be mounted successfully. 6. When you have confirmed that all new volumes/devices were mounted successfully, you are finished with disk array device configuration. Leave the new volumes mounted for now, so you can verify that NetWare clients can access the new volumes. NetWare 6.0 1. Using ConsoleOne, right click the targeted server, and click Properties. 2. Click the Media tab, and click NSS Logical Volumes. 3. Click New, enter a name for the volume, then click Next. 4. In the Create Logical Volume - Storage Information window, select the desired pool/device, enter the desired Volume Quota, then click Next. 5. In the Create Logical Volume - Storage Information window check Activate and Mount in the "On Creation" box, then click Finish. 6. Confirm that the logical volume has been created. 7. Map the created Logical Volume as the Network Drive. 8. Confirm the mapped drive. NetWare 6.5 1. Enter NSSMU at the server console. 2. In the main menu, select Volumes. 3. Press Insert and enter a name for the new volume, then click Next. 4. Select the desired pool/device, enter the desired Volume Quota, then click Next. 5. Review and change volume attributes as necessary. 6. Select Create. Verifying client operations After configuring the Novell NetWare system, verify that NetWare clients can access the new volumes. To verify access: 1. Copy an existing file onto each new volume. 2. Verify that the file was copied successfully. 20 Installing and configuring Novell NetWare for the XP disk array