HP StorageWorks XP12000 HP StorageWorks XP12000 Disk Array owner's guide (AE00 - Page 41
To power off the disk array in an emergency
![]() |
View all HP StorageWorks XP12000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
To power off the disk array in an emergency: 1. Locate the UNIT EMERGENCY POWER OFF switch on the back side of the DKC. Its location is shown in the following figure. 2. Pull the switch up and then out towards you. The disk array shuts down immediately. The UNIT EMERGENCY POWER OFF switch mechanically locks itself in the off position to prevent anyone from restoring power in a potentially hazardous situation. WARNING! The UNIT EMERGENCY POWER OFF switch provides only partial power off capability. AC input power remains present at the primary circuit. 3. When the emergency situation is over, call the HP support center. Only a qualified HP support representative can reset the switch and restore power to the disk array. HP StorageWorks XP12000 Disk Array 41
![](/manual_guide/products/hewlettpackard-storageworks-xp12000-hp-storageworks-xp12000-disk-array-owners-guide-ae00296029-2006-c6b097f/41.png)