HP Surestore 1200ex Optical Drive and Library SCSI-2 Command Reference - Page 322
Autochanger Error Codes, Rotate in was too much distance
View all HP Surestore 1200ex manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 322 highlights
Table B-10 Autochanger Error Codes Jukebox Micro-Move Error Codes Micro-Move Error Codes Error Code Failure Description (hex.) 5A Command received to rotate mailslot but both pickers are full 5B Back sensor in mailslot is bad 5C Front sensor in mailslot is bad 5D Command received to eject from the mailslot, but both pickers are full 5E Attempt to load from an empty mailslot 5F Engaging the mailslot failed on a rotate in 60 Disengaging the mailslot failed on a rotate in 61 Rotate in catch error (not used) 62 Rotate in push out error (not used) 63 Rotate in armed failed (not used) 64 Did not detect hard stop on a rotate in 65 Rotate in was too much distance 66 Engaging the mailslot failed on a rotate out 67 Disengaging the mailslot failed on a rotate out 68 Did not detect hard stop on a rotate out 69 Rotate out distance was too short 6A Could not move thumbs out of the vertical path after a rotate out 6B Vertical distance difference detected after error recovery 6C Cartridge in mailslot incorrectly at rotate in 6D Mailslot rotate in accept fail Appendix B B-35 Autochanger Error Codes