HP Surestore 15 Slot with DLT4000 HP SureStore DLT Tape Library Models 4115w/4 - Page 36
Table 1-6, Tape Library with Other Peripherals, Configuration, Cabling, Mode Switch Settings,
![]() |
View all HP Surestore 15 Slot with DLT4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installing the Tape Library Step 5: Set the SCSI Interface Mode Switch Table 1-6 The following table shows connection options when there are other peripherals. Tape Library with Other Peripherals Configuration One-Drive Tape Library: Library on its own bus Maximum performance Cabling Single-ended SCSI connection shown Mode Switch Settings One-Drive Tape Library: Daisy chained to peripheral Minimum host I/O slots used Two-Drive Library: Daisy chained library and peripheral Minimum host I/O slots used Single-ended SCSI connection shown bus 2 not used i rq Two-Drive Library: bus 1 and bus 2 use separate SCSI cards Additional card and cable required Minimum I/O slots used 1-22
![](/manual_guide/products/hewlettpackard-surestore-15-slot-dlt4000-hp-surestore-dlt-tape-library-models-4115w4215w-7115w7215w-user039s-guide-187521a/36.png)
1-22
Installing the Tape Library
Step 5: Set the SCSI Interface Mode Switch
The following table shows connection options when there are other peripherals.
Table 1-6
Tape Library with Other Peripherals
Configuration
Cabling
Mode Switch Settings
One-Drive Tape Library:
Library on its own bus
Maximum performance
One-Drive Tape Library:
Daisy chained to
peripheral
Minimum host I/O slots
used
Two-Drive Library:
Daisy chained library and
peripheral
Minimum host I/O slots
used
Two-Drive Library: bus 1
and bus 2 use separate
SCSI cards
Additional card and cable
required
Minimum I/O slots used
Single-ended
SCSI
connection shown
bus 2 not used
Single-ended
SCSI
connection shown