HP Surestore 15 Slot with DLT4000 HP SureStore DLT Tape Library Models 4115w/4 - Page 63
Entering the Administration Menu Password
View all HP Surestore 15 Slot with DLT4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Library Operation Operating the Library Entering the Administration Menu Password Entering the Administration Menu Password 1 2 → ADMIN * → CONFIG * A numeric password is required to access options beneath ADMIN* menu of the library (see Figure 3-2 on page 3-8). A three-part default password of 000-000-000 is set at the factory. To change the password, see "Setting a New Administration Menu Password" on page 3-10. To enter the password: 1. Verify that the drive status displays. If it does not display, press CANCEL until it does. 2. Press NEXT until ADMIN * displays, then press ENTER. 3. PSWD 000-000-000 displays, and the first set of zeros flashes. Press ENTER to accept this number (if no password has been set), or press NEXT or PREV until the correct number displays. Press ENTER. 4. The middle set of zeros flashes. Press ENTER to accept this number (if no password has been set), or press NEXT or PREV until the correct number displays. Press ENTER. 5. The last set of zeros flashes. 6. Press ENTER to accept this number (if no password has been set), or press NEXT or PREV until the correct number displays. 7. Press ENTER. INFO * displays. To access options under the ADMIN * menu, press PREV or NEXT until the desired option displays, then press ENTER. 3-9