HP Surestore 15 Slot with DLT7000 Digital Linear Tape SCSI-2 Drive and SCSI-3 - Page 174
HP Surestore 15 Slot with DLT7000 Manual
View all HP Surestore 15 Slot with DLT7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Library SCSI-3 Command Set Log Sense Command (4DH) Table 2-105 Tape Drive/ Library Flag Definitions No Flag Type Displayed Message Probable Cause 14 Library W Place Retry 15 Library W Load Retry 16 Library C Door 18 Library C Magazine There is a potential problem with the library mechanism placing a cartridge into a slot. 1. No action needs to be taken at this time. 2. If the problem persists, call library support. Operation to place a cartridge into a slot had to perform an excessive number of retries before succeeding. This flag is set anytime the changer had to retry a place operation to a slot. There is a potential problem with a drive or the library mechanism loading cartridges or an incompatible cartridge. 1. Remove any incompatible media. Operation to load a cartridge into a drive had to perform an excessive number of retries before succeeding. This flag is set anytime the changer had to retry a place operation to the drive or if incompatible media was detected. The operation has failed because the library door is open: 1. Clear any obstructions from the library door. 2. Close the library door. 3. If the problem persists, call library support. Changer door open prevents library from functioning. This flag is set only when an open door prevented a library operation over the SCSI interface. The library cannot operate without a magazine. 1. Insert a magazine into the library. 2. Restart the operation. Library magazine(s) not present. This flag is only set when there are no magazines detected by the library. 2- 130 Chapter 2