HP Surestore 80fx 32/64/76 Slot, 5.2 Gbyte Drive Optical Jukebox Upgrade and C - Page 14

First Steps Equipment, Tools, and Firmware Needed Equipment, Tools, and Firmware Needed PC Tool Equipment and Software Needed When upgrading or converting the library you will be connecting your PC tool to the jukebox for two reasons: downloading firmware to the jukebox controller and drives and verifying proper operation of the drives after installation. The following hardware and software is required: • IBM AT-compatible computer • Adaptec interface board • Cables and adapters that will enable you to connect the SCSI port of your PC tool to a high-density SCSI port on the jukebox. In addition to a service SCSI cable stored inside the jukebox you may need an adapter from the list below: PTI cable: Adaptec products 50-pin to 68-pin cable (PTI part number HP01) Adaptec APA 1460 connector (Adaptec part no. ACK-1460-50HD) Internal converter (Adaptec part no. ACK-68P-50P-IU) Standard 68-pin male to 68-pin male SCSI cable • A firmware download utility • An MO scratch disk for testing the drives. SCSI PRO® CoComp www.cocomp.com SCSI Toolbox® Peripheral Test Instruments (PTI) www.pti.com 1-10