HP Surestore Disk Array FC60 HP SureStore E Disk Array FC60 - (English) Advanc - Page 214
Verifying the Operating System, Installing the Disk Array FC60 Software, uname -a, HP-UX 10.20
View all HP Surestore Disk Array FC60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
Verifying the Operating System The Disk Array FC60 is supported on the following operating systems versions: • HP-UX 11.0, 11.11, and 10.20 Before installing the Disk Array FC60 system software, verify that you are running the required operating system version. To identify the operating system version, type: uname -a A response similar to the following should be displayed indicating the version of HP-UX the host is running: HP-UX myhost B.11.0.0 C 9000/750 1234567890 n-user license Note Controller firmware HP08 is not supported on HP-UX 11.11. If the disk array is being installed on a host running HP-UX 11.11, it will be necessary to downgrade the controller firmware to HP03 after installing the software. Installing the Disk Array FC60 Software The following HP-UX patches are required for the HP SureStore E Disk Array FC60. - HP-UX 10.20: PHCO_22627 and PHSS_22846 - HP-UX 11.0: PHCO_22628 and PHSS_22847 The required patches can be downloaded from the following web sites: http://us-support2.external.hp.com/index.html/ (External web site) ftp://hpatlse.atl.hp.com/hp-ux_patches/ (Internal web site) Note The patches are not currently included on the HP-UX Support Plus CD-ROM. They must be downloaded from the indicated web sites. To install the software: 1. Download and install the required patches. 2. Execute the following command to verify that the required patches are installed: 214 Installing the Disk Array FC60 Software (HP-UX Only)